1. Pengenalan
Thank you for choosing the GBC Fusion 1100L Thermal Laminator. This machine is designed to protect and preserve your important documents, photos, and creative projects with ease and efficiency. Ideal for small offices, schools, or home use, it offers both hot and cold lamination capabilities. Please read this manual thoroughly before operating the laminator to ensure safe and optimal performance.
Rajah 1: Depan view of the GBC Fusion 1100L Thermal Laminator.
2. Maklumat Keselamatan
Always follow basic safety precautions when using this electrical appliance to reduce the risk of fire, electric shock, or injury.
- Jangan kendalikan laminator jika kord kuasa atau palamnya rosak.
- Jauhkan laminator daripada air atau cecair lain.
- Pastikan pengudaraan yang betul di sekitar mesin semasa operasi.
- Do not touch the laminator's exit area immediately after use, as it may be hot.
- Cabut plag laminator apabila tidak digunakan atau sebelum dibersihkan.
- Jauhkan daripada kanak-kanak.
3. Persediaan
- Membongkar: Carefully remove the laminator from its packaging. Retain packaging for future storage or transport.
- penempatan: Place the laminator on a stable, flat surface with adequate space for documents to feed through and exit. Ensure there is sufficient ventilation around the machine.
- Sambungan Kuasa: Palamkan kord kuasa ke soket elektrik standard.
- Initial Warm-up: Turn on the laminator. The machine will begin its warm-up cycle, which typically takes about 4 minutes. The green "Ready" light will illuminate when the laminator has reached the optimal operating temperature.
4. Arahan Operasi
4.1. Hot Lamination
- Power On and Warm-up: Turn on the laminator and wait for the green "Ready" light to illuminate (approximately 4 minutes).
- Select Pouch Thickness: Use the slider switch on the control panel to select the appropriate pouch thickness: 3 mil or 5 mil.
- Sediakan Dokumen: Place your document inside a laminating pouch, ensuring it is centered and aligned with the sealed edge of the pouch.
- Masukkan Pouch: Feed the sealed edge of the pouch into the laminator's entry slot. The machine will automatically pull the pouch through.
- Retrieve Laminated Document: Once the pouch exits the machine, allow it to cool on a flat surface before handling.
Figure 2: Inserting a document into the laminator for hot lamination.
4.2. Cold Lamination
The GBC Fusion 1100L also supports cold lamination for heat-sensitive materials.
- Select Cold Setting: Move the slider switch on the control panel to the "Cold" setting.
- Sediakan Dokumen: Use pressure-sensitive adhesive pouches (e.g., GBC SelfSeal pouches, sold separately) and place your document inside.
- Masukkan Pouch: Feed the sealed edge of the cold laminating pouch into the laminator's entry slot. The machine will apply pressure to seal the pouch.
- Retrieve Laminated Document: Remove the laminated document once it has passed through the machine.
4.3. Jam Release Feature
In the event of a misfed or jammed pouch, press and hold the "Release" button located on the control panel. This will disengage the rollers, allowing you to carefully pull the pouch out. Release the button once the pouch is clear.
Figure 3: Key features including the Jam Release button and 9-inch laminating width.
5. Penyelenggaraan
- Penggelek Pembersih: To maintain optimal performance and prevent adhesive buildup, regularly run a laminator cleaning sheet through the machine. This should be done after every few uses or if you notice any residue on your laminated documents.
- Pembersihan Luaran: Wipe the exterior of the laminator with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Storan: Apabila tidak digunakan, simpan laminator di tempat yang sejuk dan kering, jauh dari cahaya matahari langsung dan suhu yang melampau.
6. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Laminator tidak dihidupkan. | No power, power switch off. | Check power cord connection. Ensure power switch is in the "On" position. |
| Pouch is jammed. | Misfed pouch, incorrect pouch size. | Press and hold the "Release" button to clear the jam. Ensure pouches are fed straight and are within the 9-inch width limit. |
| Laminated document has wrinkles or bubbles. | Pouch not fed straight, incorrect temperature setting, old pouches. | Ensure pouch is fed straight. Verify correct mil setting. Use fresh, high-quality laminating pouches. |
| Laminator not warming up. | Kerosakan dalaman. | Allow sufficient warm-up time (4 minutes). If problem persists, contact customer support. |
7. Spesifikasi
- Jenama: GBC
- model: Fusion 1100L (1703074)
- Laminating Width: 9 inci
- Pouch Thickness Compatibility: 3 mil, 5 mil
- Masa memanaskan badan: Lebih kurang 4 minit
- Laminating Speed: 13 inches per minute (approx. 10 documents in 10 minutes)
- Laminasi Sejuk: ya
- Matikan Auto: ya
- Berat Barang: 3 paun
- Dimensi Produk: 16.38 x 5.28 x 4.17 inci
Figure 4: The GBC Fusion 1100L comes with a 3-year warranty and includes 10 EZUse pouches.
8. Waranti dan Sokongan
The GBC Fusion 1100L Thermal Laminator comes with a Waranti terhad 3 tahun. Waranti ini melindungi kecacatan pada bahan dan mutu kerja di bawah penggunaan biasa. Sila simpan bukti pembelian anda untuk tuntutan waranti.
Aksesori yang disertakan: Your laminator package includes 10 letter size EZUse Laminating Pouches, designed for easy loading and document alignment.
Figure 5: Included GBC EZUse 10 Pack laminating pouches.
For technical support, troubleshooting assistance, or warranty inquiries, please refer to the official GBC webtapak atau hubungi bahagian perkhidmatan pelanggan mereka.
