Manual Pengguna Termometer Pengukuran Suhu Digital Hygiplas J242 Easytemp Putih

1. Pengenalan

This manual provides essential instructions for the safe and effective use of your Hygiplas J242 Easytemp White Digital Temperature Measurement Thermometer. Designed for accurate temperature readings, this device features a fold-away probe and an auto on/off function to conserve battery life. The white color coding indicates its intended use for baked and dairy goods, aiding in the prevention of cross-contamination.

Image 1.1: The Hygiplas J242 Easytemp Digital Thermometer with its stainless steel probe extended, ready for use. The digital display shows a temperature reading, and control buttons are visible below the screen.

2. Persediaan

2.1. Pemasangan Bateri

The thermometer is supplied with a battery. To install or replace the battery, locate the battery compartment cover, typically on the back or side of the unit. Use a small screwdriver if necessary to open the compartment. Insert the battery, ensuring correct polarity (+/-), then securely close the cover.

2.2. Memasang Tali Pergelangan Tangan

A detachable wrist strap is included for convenience and to prevent accidental drops. Thread the loop of the wrist strap through the designated attachment point on the thermometer handle and secure it.

3. Arahan Operasi

3.1. Menghidupkan/Mematikan

• Automatik Hidup: The thermometer will automatically power on when the probe is unfolded.
• Manual Hidup/Mati: Press the 'ON/OFF' button (red button, typically on the right below the display) to manually turn the unit on or off.
• Mati Automatik: The unit features an auto-off function to conserve battery power after a period of inactivity or when the probe is folded away.

3.2. Mengambil Bacaan Suhu

1. Unfold the stainless steel probe. The unit will power on automatically.
2. Insert the probe tip into the center of the food item or liquid you wish to measure. Ensure the probe is inserted deep enough to get an accurate core temperature, avoiding bones or fat pockets.
3. Wait for the temperature reading on the digital display to stabilize. This may take several seconds.
4. Once the reading is stable, remove the probe.

Image 3.1: A hand demonstrates holding the Hygiplas J242 Easytemp Digital Thermometer, with its probe inserted into a food item to measure temperature.

3.3. Unit Suhu Pensuisan (°C/°F)

To switch between Celsius (°C) and Fahrenheit (°F), press the '°C/°F' button, typically located on the left below the display.

3.4. MAX/MIN Function

The thermometer can record the maximum and minimum temperatures measured during a session. Press the 'MAX/MIN' button (center red button below the display) to cycle through the current temperature, maximum recorded temperature, and minimum recorded temperature.

3.5. Fungsi HOLD

To hold the current temperature reading on the display, press the 'HOLD' button (red button, typically on the right side of the unit, above the ON/OFF button). Press it again to release the hold and resume live temperature readings.

Imej 3.2: Gambar jarak dekat view of the Hygiplas J242 Easytemp Digital Thermometer's display, showing a temperature reading, and the three red control buttons for °C/°F, MAX/MIN, and ON/OFF.

4. Penyelenggaraan

4.1. Pembersihan

To ensure hygiene and prolong the life of your thermometer, clean the probe thoroughly after each use. The product care instructions specify Cuci Tangan Sahaja. Gunakan iklanamp cloth with mild soap and water to clean the probe. Do not immerse the main body of the thermometer in water.

4.2. Penyimpanan

Always fold the probe back into the unit when not in use. This protects the probe from damage and activates the auto-off function. Store the thermometer in a clean, dry place at room temperature.

Image 4.1: The Hygiplas J242 Easytemp Digital Thermometer with its probe folded securely into the handle, indicating it is ready for storage.

5. Penyelesaian masalah

• Tiada Paparan/Paparan Samar: Check battery installation and replace the battery if necessary.
• Bacaan Tidak Tepat: Ensure the probe is inserted correctly into the center of the item. Avoid contact with bones or the bottom of containers. If issues persist, the battery may be low, or the unit may require recalibration (refer to manufacturer support if available).
• Bacaan Lambat: While some delay is normal for temperature stabilization, excessively slow readings might indicate a low battery or environmental factors. Ensure the probe is clean.
• Unit Tidak Dihidupkan: Ensure the probe is fully unfolded. If using the manual ON/OFF button, ensure it is pressed firmly. Check battery status.

6. Spesifikasi

7. Waranti dan Sokongan

For specific warranty information, please refer to the documentation provided with your purchase or contact the retailer. For technical support or further assistance, please reach out to the manufacturer, NISBETS, through their official customer service channels.