1. Pengenalan
This user manual provides essential information for the safe and efficient installation, operation, and maintenance of your Perry Electric 1RI 04230AC/I electromechanical impulse relay. Please read this manual thoroughly before attempting any installation or operation to ensure proper function and safety.
2. Maklumat Keselamatan
AMARAN: Electrical installation should only be performed by qualified personnel. Incorrect installation can lead to electric shock, fire, or damage to the device.
- Always disconnect power at the main circuit breaker before installing or servicing the relay.
- Pastikan semua pendawaian mematuhi kod elektrik tempatan dan nasional.
- Jangan melebihi vol yang ditentukantage dan penilaian semasa peranti tersebut.
- Jauhkan peranti daripada kelembapan dan suhu yang melampau.
3. Produk Lebihview
The Perry Electric 1RI 04230AC/I is an electromechanical impulse relay designed for controlling lighting circuits or other loads. It operates by changing its contact state (ON/OFF) with each electrical pulse received. This model is suitable for flush-mounted installations.
Rajah 1: Perry Electric 1RI 04230AC/I Impulse Relay. This image shows the transparent casing of the relay, revealing the internal coil and contact mechanism. The model number "1RI 04 230AC/I" and electrical ratings "230V AC" and "10A 250V" are visible on the casing, along with the CE mark. The bottom features connection terminals.
Ciri-ciri Utama:
- Electromechanical impulse switching.
- Dinilai voltage: 230V AC, 50-60 Hz.
- Maximum continuous current: 10A / 250V AC.
- Two contacts.
- Designed for flush mounting with pre-drilled holes for screw installation.
4. Persediaan dan Pemasangan
Before proceeding with installation, ensure the main power supply is disconnected.
- Pemasangan: The relay is designed for flush mounting. Secure the device using screws through the pre-drilled holes. Ensure it is placed in a suitable electrical box or enclosure that provides adequate protection and ventilation.
- Pendawaian: Connect the relay according to the wiring diagram provided with the product or standard electrical practices for impulse relays.
- Sambungkan bekalan kuasa AC 230V ke terminal yang ditetapkan.
- Connect the control button (e.g., push-button switch) to the impulse input terminals.
- Connect the load (e.g., light fixture) to the output contacts of the relay. The relay has two contacts, allowing for flexible wiring configurations.
- Pengesahan: Periksa semula semua sambungan untuk memastikan ketat dan betul sebelum memulihkan kuasa.
5. Arahan Operasi
Once installed and power is restored, the Perry Electric 1RI 04230AC/I impulse relay operates as follows:
- Each short electrical pulse applied to the control input terminals will toggle the state of the relay's output contacts.
- If the contacts are open (load OFF), a pulse will close them (load ON).
- If the contacts are closed (load ON), a pulse will open them (load OFF).
- This allows for control of a load from multiple push-button switches connected in parallel.
6. Penyelenggaraan
The Perry Electric 1RI 04230AC/I impulse relay is designed for long-term, reliable operation with minimal maintenance. However, periodic checks can help ensure continued performance:
- Pemeriksaan Visual: Periodically inspect the relay and its connections for any signs of damage, overheating, or loose wiring.
- Pembersihan: Jika perlu, bersihkan bahagian luar geganti dengan lembut dengan kain kering dan lembut. Jangan gunakan pembersih atau pelarut yang melelas.
- Semakan Sambungan: Ensure all terminal connections remain tight.
Sentiasa putuskan sambungan kuasa sebelum melakukan sebarang penyelenggaraan.
7. Penyelesaian masalah
If the relay is not functioning as expected, consider the following:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Relay does not switch ON/OFF. | No power supply to the relay. Faulty control button. Pendawaian yang tidak betul. | Periksa bekalan kuasa utama. Test the control button. Verify wiring against the diagram. |
| Load does not turn ON/OFF. | Faulty load (e.g., bulb). Loose connection to the load. Relay contacts damaged. | Test the load independently. Check load wiring. If contacts are damaged, replace the relay. |
| Relay makes unusual noise. | Normal operation (electromechanical relays can be slightly audible). Loose internal components (rare). | A slight hum is normal. If noise is excessive or new, disconnect power and inspect. If persistent, consider replacement. |
Jika langkah penyelesaian masalah tidak menyelesaikan masalah, hubungi juruelektrik yang berkelayakan atau pengilang untuk mendapatkan bantuan.
8. Spesifikasi
| Atribut | Nilai |
|---|---|
| Pengeluar | PERRY ELECTRIC |
| Nombor Model | 1RI 04230AC/I |
| Dinilai Voltage | 230V AC, 50-60 Hz |
| Maks. Arus Berterusan | 10A / 250V AC |
| Bilangan Kenalan | 2 |
| Jenis Pemasangan | Flush-mounted (Incasso) |
| Dimensi | 7.2 x 6.9 x 3.2 cm |
| Berat badan | 60 gram |
| Bateri Diperlukan | Tidak |
9. Waranti dan Sokongan
For specific warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support or further inquiries regarding the Perry Electric 1RI 04230AC/I impulse relay, please contact Perry Electric customer service or visit their official webtapak.
Pengeluar: PERRY ELECTRIC
