Mount-It! Slim Tilting TV Wall Mount Bracket

pengenalan

Thank you for choosing the Mount-It! MI-1131L Slim Tilting TV Wall Mount Bracket. This manual provides essential information for the safe and proper installation, operation, and maintenance of your new TV wall mount. Please read all instructions carefully before beginning installation and retain this manual for future reference.

This wall mount is designed to securely hold most 32 to 55 inch flat panel televisions, supporting VESA patterns up to 600x400mm and a maximum weight of 165 lbs (70 kgs). Its low-profile design extends only 1.9 inches from the wall, providing a sleek and modern appearance. The tilting feature allows for optimal viewsudut dan pengurangan silau.

Maklumat Keselamatan Penting

AMARAN: Failure to read and follow all instructions may result in personal injury, property damage, or voiding of warranty. If you have any questions, please contact Mount-It! customer service.

• Do not install into drywall alone. This mount must be installed into wood studs, concrete, or brick walls.
• Pastikan permukaan pelekap dapat menyokong berat gabungan pelekap dan televisyen dengan selamat.
• Always use a stud finder to locate the center of wood studs.
• Do not exceed the maximum weight capacity of 165 lbs (70 kgs).
• Do not overtighten screws. Overtightening can cause damage to the mount or your TV.
• Always use two people for lifting and positioning the TV.
• Jauhkan kanak-kanak dan haiwan peliharaan semasa pemasangan.

Kandungan Pakej

Please verify that all parts are present and undamaged before installation. If any parts are missing or defective, contact Mount-It! customer service.

• Wall Plate Assembly (with built-in level)
• Lengan Pendakap TV (2x)
• Kit Perkakasan Pemasangan (pelbagai skru, pencuci, spacer untuk TV dan dinding)
• Manual Arahan
• Small Level (additional, if included)
• Kabel HDMI (jika disertakan)

Imej: Selesaiview of the Mount-It! MI-1131L TV Wall Mount Bracket, showing the main wall plate and two TV bracket arms.

Panduan Pemasangan

This section outlines the steps for installing your TV wall mount. Ensure you have the necessary tools (pencil, drill, stud finder, Phillips head screwdriver, socket wrench) before proceeding.

Step 1: Attach TV Bracket Arms to TV

1. Letakkan TV anda dengan berhati-hati menghadap ke bawah di atas permukaan yang lembut dan bersih untuk mengelakkan calar.
2. Kenal pasti lubang pelekap VESA di bahagian belakang TV anda.
3. Select the appropriate screws, washers, and spacers from the hardware kit that fit your TV's VESA pattern. The mount supports VESA patterns such as 100x100, 200x200, 300x300, 400x400, and up to 600x400mm.
4. Attach the two TV bracket arms to the back of your TV using the selected hardware. Ensure the arms are oriented correctly (hooks facing downwards) and are securely tightened.

Image: Illustration showing a TV with its VESA mounting points and how the bracket arms attach. This mount is compatible with TVs from 32 to 55 inches.

Imej: Terperinci view highlighting the 2mm thick cold-rolled steel construction, the tilt locking knob, and the safety screw mechanism on the TV bracket arms.

Langkah 2: Lekapkan Plat Dinding ke Dinding

1. Determine the desired height for your TV. Mark the center of the desired location on the wall.
2. Use a stud finder to locate two adjacent wood studs. Mark the center of each stud. The wall plate is designed to span two standard 16-inch on-center studs.
3. Hold the wall plate against the wall, aligning its center with your marked height and the mounting holes with the stud centers. Use the built-in bubble level on the wall plate to ensure it is perfectly horizontal.
4. Mark the drill holes through the wall plate onto the wall.
5. Drill pilot holes into the studs at the marked locations. The size of the drill bit will depend on the lag bolts provided.
6. Secure the wall plate to the wall using the lag bolts and washers provided. Tighten them firmly but do not overtighten.

Image: Technical diagram of the MI-1131L wall mount, showing the built-in level, monitor brackets with 10 degrees tilt, bracket tilt locking handle, large cable through openings, and heavy-duty cold-rolled steel construction.

Image: Diagram illustrating the VESA compliant arm brackets and the overall width (25.6 inches) and height (15.75 inches) of the mount's VESA compatibility area.

Langkah 3: Gantungkan TV pada Plat Dinding

1. With assistance, carefully lift the TV with the attached bracket arms.
2. Sejajarkan cangkuk pada lengan pendakap TV dengan tepi atas plat dinding.
3. Turunkan TV dengan perlahan sehingga lengan pendakap terpasang dengan kukuh pada plat dinding.
4. Once the TV is hanging, locate the safety screws at the bottom of each TV bracket arm. Tighten these screws to prevent the TV from accidentally lifting off the wall plate.

Image: Close-up illustration of the safety screw bracket locking system, showing how the screw secures the TV bracket to the wall plate.

Arahan Operasi

Melaraskan Sudut Kecondongan

The Mount-It! MI-1131L allows for a tilt adjustment of up to 15 degrees downwards. This feature helps reduce glare and optimize your viewpengalaman dalam.

1. Locate the adjustable tilting knobs on the side of each TV bracket arm.
2. Loosen the knobs slightly to allow the TV to tilt.
3. Condongkan TV dengan berhati-hati ke sudut yang anda inginkan.
4. Once the desired angle is achieved, tighten the tilting knobs firmly to secure the TV in place.

Image: Visual representation of the mount's 15-degree downward tilt capability, showing the range of motion.

Penyelenggaraan

Penyelenggaraan berkala memastikan ketahanan dan operasi pemasangan TV di dinding anda yang selamat.

• Pembersihan: Lap pelekap dengan kain lembut dan kering. Jangan gunakan pembersih atau pelarut yang melelas.
• Pemeriksaan Berkala: Periodically check all screws and bolts to ensure they remain tight. Over time, vibrations or movement can cause fasteners to loosen.
• Pemeriksaan Kerosakan: Inspect the mount for any signs of damage or wear. If any damage is found, do not use the mount and contact customer service.

Menyelesaikan masalah

Spesifikasi

Image: Diagram showing the overall dimensions of the wall mount: 28.75 inches width, 9.5 inches height (wall plate), and 16.5 inches height (with arms extended).

Waranti dan Sokongan

Maklumat Waranti

Mount-It! products are designed for durability and performance. For specific warranty details regarding your MI-1131L TV wall mount, please refer to the warranty card included in your package or visit the official Mount-It! webtapak.

Sokongan Pelanggan

If you encounter any issues during installation or operation, or if you have questions about your product, please contact Mount-It! customer support. Our team is available to assist you.

• Webtapak: Visit the Mount-It! Store on Amazon
• Hubungi: Refer to the Mount-It! webtapak untuk kaedah hubungan semasa (telefon, e-mel, sembang).