Manual Pengguna Tempat Duduk Tandas Ideal Standard San ReMo slimline K705401

pengenalan

This manual provides detailed instructions for the installation, operation, and maintenance of your Ideal Standard San ReMo slimline K705401 Toilet Seat. Please read this manual thoroughly before installation and retain it for future reference.

Maklumat Keselamatan

• Pastikan semua komponen ada dan tidak rosak sebelum memulakan pemasangan.
• Do not use abrasive cleaners or harsh chemicals on the toilet seat or hinges, as this may damage the finish.
• Avoid excessive force when closing the seat, as this model does not feature a soft-close mechanism.
• Jauhkan bahagian kecil daripada kanak-kanak.

Kandungan Pakej

Sahkan bahawa semua item berikut disertakan dalam pakej anda:

• Ideal Standard San ReMo slimline Toilet Seat (Duroplast, White)
• Stainless Steel Hinges and Mounting Hardware

Persediaan (Pemasangan)

Follow these steps to properly install your new toilet seat. Basic tools such as a screwdriver or wrench may be required.

1. Sediakan Mangkuk Tandas: If replacing an old seat, remove it completely. Clean the toilet bowl's mounting area thoroughly.
2. Attach Hinges to Seat: Secure the stainless steel hinges to the designated points on the underside of the toilet seat using the provided screws. Ensure they are firmly attached but do not overtighten.
3. Letakkan Tempat Duduk: Place the toilet seat with attached hinges onto the toilet bowl, aligning the hinge posts with the mounting holes on the ceramic.
4. Secure the Mounting Hardware: From underneath the toilet bowl, attach the washers and nuts to the hinge posts. Hand-tighten first to allow for minor adjustments.
5. Laraskan dan Kencangkan: Adjust the seat position to ensure it is centered and aligned with the toilet bowl. Once satisfied with the alignment, fully tighten the nuts using a suitable tool. Do not overtighten, as this can damage the ceramic or hardware.
6. Kestabilan Ujian: Uji kestabilan tempat duduk dengan lembut. Ia tidak sepatutnya goyah atau beralih.

Figure 1: Technical drawing illustrating the dimensions and hinge mounting points of the toilet seat.

Figure 2: The K705401 toilet seat shown installed on a compatible toilet bowl.

Pengendalian (Penggunaan)

The Ideal Standard San ReMo slimline toilet seat is designed for standard use. Please note the following:

• This toilet seat tidak feature a soft-close mechanism. Close the seat and lid manually with care to prevent slamming.
• Ensure the seat is fully lowered before use.

Figure 3: The K705401 toilet seat in its closed position.

Figure 4: The K705401 toilet seat with the lid in the open position.

Rajah 5: Depan view of the K705401 toilet seat, highlighting its slimline design.

Penyelenggaraan

Penjagaan yang betul akan memastikan ketahanan dan penampilan tempat duduk tandas anda.

• Membersihkan Tempat Duduk: Use a soft cloth and mild, non-abrasive soap and water. Wipe gently and rinse thoroughly with clean water. Dry with a soft cloth.
• Cleaning the Hinges: The stainless steel hinges can be cleaned with a damp cloth and mild detergent. Avoid harsh chemicals or abrasive pads that could scratch the finish.
• Elakkan: Do not use bleach, acid-based cleaners, scouring powders, or abrasive sponges, as these can damage the Duroplast material and stainless steel finish.
• Semakan Berkala: Periodically check the hinge connections to ensure they remain tight. Retighten if necessary to prevent wobbling.

Menyelesaikan masalah

Spesifikasi

Waranti dan Sokongan

Untuk maklumat jaminan atau sokongan teknikal, sila rujuk Standard Ideal rasmi webtapak atau hubungi bahagian perkhidmatan pelanggan mereka. Simpan bukti pembelian anda untuk sebarang tuntutan waranti.

Nota: Terma jaminan khusus mungkin berbeza mengikut rantau dan peruncit.