Williams mmD-614 1/4-inch Drive 14mm 6-Point Deep Socket Instruction Manual

1. Produk Lebihview

The Williams mmD-614 is a 1/4-inch drive, 14mm, 6-point deep socket. It is engineered for professional use, featuring a high-polished chrome finish for durability and corrosion resistance. The socket incorporates SUPERTORQUE lobular openings, designed to provide increased turning power while minimizing the risk of deforming the fastener. This design ensures maximum engagement with 6-point fasteners.

Image 1: The Williams mmD-614 1/4-inch Drive 14mm 6-Point Deep Socket, showcasing its polished chrome finish and 14mm marking.

Ciri-ciri Utama:

• Bukaan Lobular SUPERTORQUE: Provides greater turning power and prevents fastener deformation.
• Reka Bentuk 6 Titik: Ensures maximum engagement with fasteners for secure operation.
• Kemasan Krom Bergilap Tinggi: Offers enhanced durability and resistance to corrosion.
• Cold Formed Alloy Steel: Precision machined and fully heat-treated for strength.
• Chamfered Ends: Facilitates easy engagement with drive tools and fasteners.
• Grip Rings: Allows for a firm hold, aiding in easy removal of sockets, even with greasy or gloved hands.

2. Persediaan dan Persediaan

Before using the socket, ensure you have the correct drive tool (e.g., ratchet, breaker bar) with a 1/4-inch square drive. Verify that the fastener size matches the 14mm socket to prevent damage to both the fastener and the tool.

Langkah-langkah Penyediaan:

1. Inspect the socket for any signs of damage or wear. Do not use damaged tools.
2. Select a 1/4-inch drive tool that is appropriate for the task and required torque.
3. Clean the fastener head and the socket opening to ensure a clear and secure fit.

3. Arahan Operasi

Proper use of the deep socket ensures efficient and safe operation.

Langkah Penggunaan:

1. Attach the 14mm deep socket firmly onto the 1/4-inch square drive of your chosen tool. Ensure it clicks into place or is securely seated.
2. Position the socket over the 14mm fastener. The chamfered end assists in easy engagement.
3. Apply steady, controlled pressure to turn the drive tool. For tightening, turn clockwise; for loosening, turn counter-clockwise.
4. Ensure the socket remains fully engaged with the fastener throughout the turning process to prevent slipping and potential injury or damage.
5. Once the task is complete, remove the socket from the fastener and then from the drive tool. The grip rings facilitate easy removal.

Image 2: A hand holding the Williams 14mm Deep Socket, illustrating its compact size and 2.1-inch (5 cm) length, which is useful for accessing recessed fasteners.

4. Penyelenggaraan dan Penjagaan

Regular maintenance extends the life and performance of your Williams deep socket.

Garis Panduan Penyelenggaraan:

• After each use, wipe the socket clean to remove dirt, grease, or debris.
• Store the socket in a dry environment to prevent rust and corrosion.
• Avoid using the socket with power tools that exceed its intended torque capacity, as this can lead to premature wear or breakage.
• Do not use the socket as a pry bar or for any purpose other than turning fasteners.

5. Penyelesaian masalah

If you encounter issues during use, consider the following common troubleshooting steps:

• Socket Slipping: Ensure the socket size precisely matches the fastener. Verify that the socket is fully seated on the fastener head and the drive tool.
• Difficulty Engaging: Check for obstructions or debris on the fastener head or inside the socket. Ensure the chamfered end is properly aligned.
• Stuck Socket: If the socket becomes stuck on a fastener, apply penetrating oil if appropriate for the application, and gently wiggle the socket while pulling. Avoid excessive force.
• Damaged Fastener: If the fastener head is rounded or stripped, specialized tools may be required for removal. Do not continue to use the socket on a damaged fastener.

6. Spesifikasi

7. Video Produk Rasmi

8. Waranti dan Sokongan

Williams tools are manufactured to high standards and are designed for durability. For specific warranty information or technical support, please refer to the official Williams webtapak atau hubungi bahagian perkhidmatan pelanggan mereka. Simpan resit pembelian anda untuk tuntutan waranti.

Untuk bantuan lanjut, lawati Williams Store on Amazon.