OSRAM QTP8 1x36/230-240 T8 Fluorescent Ballast Instruction Manual

1. Pengenalan

This instruction manual provides essential information for the safe and efficient installation, operation, and maintenance of the OSRAM QTP8 1x36/230-240 T8 Fluorescent Ballast. Please read this manual thoroughly before proceeding with installation or use. Retain this manual for future reference.

2. Maklumat Keselamatan

WARNING: Risk of electric shock. Installation and servicing must be performed by a qualified electrician in accordance with all applicable national and local electrical codes and regulations.

• Always disconnect power at the circuit breaker or fuse box before installing, servicing, or removing the ballast.
• Pastikan pembumian yang betul untuk mengelakkan kejutan elektrik.
• Do not operate the ballast with damaged wiring or if the casing terjejas.
• Sahkan bahawa input voltage dan lamp wattage match the ballast specifications.
• This ballast is designed for indoor use only.

3. Produk Lebihview

The OSRAM QTP8 1x36/230-240 is an electronic fluorescent ballast designed to power one 36-watt T8 fluorescent lamp. It provides efficient and reliable operation, ensuring instant start and stable light output for compatible fluorescent lighting fixtures. The ballast operates on a 230-240 volt AC supply.

4. Pemasangan

Follow these steps for proper installation of the ballast:

1. Pemutusan Kuasa: Ensure the main power supply to the fixture is turned off at the circuit breaker before beginning any installation work.
2. Pemasangan: Securely mount the ballast within the lighting fixture using appropriate fasteners. Ensure adequate ventilation around the ballast.
3. Sambungan Pendawaian: Refer to the wiring diagram printed on the ballast label and the general guidelines below. Use appropriate wire gauges for all connections.
   • Input Power (230-240V AC): Connect the Live (L) and Neutral (N) wires from the main power supply to the corresponding input terminals on the ballast.
   • Lamp Sambungan: Sambungkan lamp wires to the ballast output terminals (typically labeled 21, 22, 23, 24) as indicated by the wiring diagram for a single T8 fluorescent lamp. Ensure all connections are firm and secure.
4. Pengesahan: Periksa semula semua sambungan pendawaian untuk ketepatan dan keselamatan. Pastikan tiada wayar kosong yang terdedah.
5. Pulihkan Kuasa: Once installation is complete and verified, restore power to the fixture.

5. Arahan Operasi

The OSRAM QTP8 1x36/230-240 T8 Fluorescent Ballast is designed for automatic operation. Once properly installed and connected to a compatible 36W T8 fluorescent lamp and power supply, the lamp will illuminate instantly upon activation of the power switch. The electronic design ensures flicker-free starting and stable light output.

6. Penyelenggaraan

This ballast contains no user-serviceable parts. Regular maintenance is limited to:

• Pembersihan: Periodically clean the exterior of the ballast and fixture to prevent dust accumulation, which can affect heat dissipation. Ensure power is disconnected before cleaning.
• Pemeriksaan: Annually inspect wiring for signs of wear, damage, or loose connections. Replace any damaged components immediately.
• Lamp Penggantian: Replace fluorescent lamps with compatible 36W T8 lamps when they reach the end of their life or show signs of degradation.

7. Penyelesaian masalah

Jika lamp fails to operate correctly, perform the following checks:

• Tiada Cahaya:
  • Verify that the power supply to the fixture is active.
  • Check that the fluorescent lamp is correctly seated and not faulty. Try replacing the lamp with a known good one.
  • Inspect all wiring connections for looseness or damage.
• Berkelip-kelip Lamp:
  • Pastikan lamp is fully inserted into its sockets.
  • Gantikan lamp if it is old or showing signs of end-of-life flickering.
  • Verify stable input voltage.
• Ballast Overheating:
  • Ensure adequate ventilation around the ballast.
  • Confirm the correct lamp taip dan wattage are being used.

If issues persist after performing these checks, contact a qualified electrician or OSRAM customer support.

8. Spesifikasi

9. Waranti dan Sokongan

This OSRAM product is covered by the manufacturer's standard warranty. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official OSRAM website. For technical assistance, troubleshooting, or warranty claims, please contact OSRAM customer support directly.

Rasmi OSRAM Webtapak: www.osram.com