FANTECH FG4

Manual Pengguna Kipas Emparan Sebaris Fantech FG4 4" Saluran 135 CFM

Model: FG4 | Brand: FANTECH

pengenalan

This user manual provides essential information for the safe and efficient installation, operation, and maintenance of your Fantech FG4 4" Duct 135 CFM Inline Centrifugal Fan. Please read this manual thoroughly before installation and retain it for future reference.

Fantech FG4 Inline Centrifugal Fan

Image: The Fantech FG4 4-inch inline centrifugal fan, featuring a silver metallic housing and a black electrical box attached to its side. This fan is designed for duct installation.

Maklumat Keselamatan

Persediaan dan Pemasangan

The Fantech FG4 fan is designed for inline duct installation. Follow these steps for proper setup:

  1. Lokasi Pemasangan: Select a suitable location in the ductwork that allows for easy access for maintenance and provides adequate space around the fan for airflow. The fan can be mounted at any angle.
  2. Sambungan Saluran: Connect the fan to 4-inch diameter ductwork using appropriate clamps or tape to ensure an airtight seal.
  3. Pendawaian elektrik:
    • Ensure power is disconnected at the circuit breaker before wiring.
    • Connect the fan's electrical wires to the power supply according to the wiring diagram provided inside the fan's junction box cover.
    • The fan operates on 12 Volts. Verify your power supply matches this requirement.
    • All wiring must comply with local and national electrical codes (e.g., NEC).
  4. Ujian: Once installed and wired, restore power and test the fan's operation.

Arahan Operasi

The Fantech FG4 fan is designed for continuous or intermittent operation to move air through duct systems. It can be controlled via a standard wall switch or a compatible remote control system (if applicable and purchased separately).

Penyelenggaraan

Penyelenggaraan berkala memastikan prestasi optimum dan jangka hayat kipas Fantech FG4 anda.

  1. Pemutusan Kuasa: Always disconnect power to the fan at the circuit breaker before performing any maintenance.
  2. Cleaning Fan Blades:
    • Periodically inspect the fan blades for dust and debris accumulation.
    • Carefully wipe the blades with a soft, damp kain. Jangan gunakan pembersih atau pelarut yang melelas.
    • Ensure blades are dry before restoring power.
  3. Pelinciran Motor: The fan motor is permanently lubricated and requires no additional lubrication.
  4. Ductwork Inspection: Periodically check the ductwork connected to the fan for any blockages or leaks that could impede airflow.

Menyelesaikan masalah

MasalahKemungkinan PuncaPenyelesaian
Kipas tidak beroperasiTiada bekalan kuasa
Pendawaian longgar
Kerosakan motor
Periksa pemutus litar dan suis kuasa
Verify all electrical connections are secure (with power off)
Contact Fantech support if motor is faulty
Pengurangan aliran udaraKerja saluran tersumbat
Bilah kipas kotor
Incorrect fan speed setting
Inspect and clear duct obstructions
Clean fan blades (see Maintenance section)
Adjust speed controller if applicable
Kebisingan yang berlebihanPemasangan longgar
Serpihan dalam kipas
Bilah kipas yang rosak
Pastikan kipas dipasang dengan kukuh
Periksa dan keluarkan sebarang serpihan
Contact Fantech support if blades are damaged

Spesifikasi

CiriPerincian
Nama ModelFG4
JenamaFANTECH
Saiz Saluran4 inci
Kapasiti Aliran Udara135 Kaki Kubik Seminit (CFM)
Sumber KuasaElektrik Bertali
Voltage12 Volt
Penggunaan Dalaman/LuarDalaman
PensijilanCSA, UL
bahanPlastic (Blades), Metallic (Housing)

Waranti dan Sokongan

Fantech products are manufactured to the highest standards and are backed by a limited warranty. For specific warranty details, please refer to the warranty card included with your product or visit the official Fantech webtapak.

For technical support, replacement parts, or warranty claims, please contact Fantech customer service:

When contacting support, please have your product model number (FG4) and purchase date available.

Dokumen Berkaitan - FG4

Praview Manual Pemasangan dan Operasi Kipas Emparan Sebaris Fantech FG Series
Panduan pemasangan dan operasi untuk kipas saluran emparan sebaris Fantech FG Series. Termasuk amaran keselamatan, dimensi, prosedur pemasangan, gambar rajah pendawaian, penyelesaian masalah, penyelenggaraan dan maklumat waranti.
Praview Manual Pemasangan dan Pengendalian Kipas Emparan Sebaris Siri Fantech FRD
Panduan pemasangan dan operasi untuk kipas emparan sebaris Siri Fantech FRD. Meliputi alat ganti, keselamatan, pemasangan, dimensi, pendawaian dan jaminan. Menampilkan pensijilan AMCA dan UL/cULus.
Praview Arahan dan Manual Pemasangan Kipas Siri Fantech FSD
Arahan pemasangan yang komprehensif, amaran keselamatan, ilustrasi pemasangan, data dimensi, skema pendawaian dan maklumat jaminan untuk kipas saluran sebaris Siri Fantech FSD, termasuk model FSD 18, FSD 20, FSD 22 dan FSD 26.
Praview Manual Pemasangan dan Operasi Pengudaraan Kuasa Saluran Ekzos Pengering Fantech DEDPV-705
Manual ini menyediakan arahan komprehensif untuk pemasangan dan pengendalian Pengudaraan Kuasa Saluran Ekzos Pengering Fantech DEDPV-705. Ia merangkumi maklumat keselamatan penting, panduan pemasangan langkah demi langkah, urutan operasi, cadangan penyelenggaraan, petua penyelesaian masalah dan butiran jaminan.
Praview Kipas Pemasangan Saluran Dalam Talian Minitube Fantech - Spesifikasi Teknikal
Terokai siri Fantech Minitube bagi kipas paksi yang dipasang pada saluran sebaris. Dokumen ini menyediakan spesifikasi teknikal terperinci, dimensi, data prestasi dan aksesori yang tersedia untuk aplikasi pengudaraan komersial dan perindustrian.
Praview Fantech FKD/KD Series Inline Centrifugal Fans Installation and Operation Manual
Comprehensive guide for the installation, operation, and safety precautions for Fantech FKD/KD Series inline centrifugal fans. Includes multilingual instructions, dimensions, wiring diagrams, and warranty information.