Tecmate TM-421

OptiMATE 2, TM-421 Automatic Battery Charger & Maintainer

Model: TM-421 | Brand: Tecmate

1. Pengenalan

This manual provides essential information for the safe and effective use of your Tecmate OptiMATE 2, TM-421, 4-step 12V 0.8A Automatic Battery Charger & Maintainer. Please read all instructions and warnings carefully before operation.

The OptiMATE 2 is designed for advanced 12V battery maintenance, suitable for STD, AGM, EFB, and GEL batteries ranging from 3 to 96Ah. It features an automatic 'connect & forget' operation, optimizing battery performance for modern vehicles, including those with 12V Eco Start/Stop systems.

2. Maklumat Keselamatan

  • Baca Arahan: Always read the complete instruction manual and all warning labels before using the charger.
  • Pengudaraan: Ensure adequate ventilation when charging batteries, especially lead-acid batteries, as they can produce explosive gases.
  • Perlindungan Mata: Wear appropriate eye protection when working with batteries.
  • Elakkan Percikan Api: Jangan merokok atau biarkan percikan api atau nyalaan api berhampiran bateri atau pengecas.
  • Polariti yang betul: Connect the charger leads to the correct battery terminals (red to positive, black to negative) to prevent damage to the battery or charger.
  • Penggunaan Dalaman/Luar: The charger is weatherproof and suitable for indoor/outdoor use, with a lowest operating temperature of -4°F (-20°C).
  • Kanak-kanak: Jauhkan pengecas dan bateri daripada kanak-kanak.
  • Peralatan Rosak: Do not operate the charger if it has a damaged cable, plug, or casing. Contact customer support for assistance.

3. Apa yang ada di dalam Kotak

Your OptiMATE 2 package includes the following components:

  • OptiMATE 2 Battery Charger
  • Weatherproof Battery Lead (with SAE connector)
  • Standard Battery Clip Set

4. Produk Lebihview

The OptiMATE 2 charger features a compact, weatherproof case with clear LED indicators to guide you through the charging and maintenance process. It includes an AC supply lead and a charge lead with an SAE connector for versatile use.

Tecmate OptiMATE 2 charger with battery clips and ring terminals
Figure 1: Tecmate OptiMATE 2 charger with included battery clips and ring terminal connectors. The charger unit displays LED indicators for its 4-step charging process and battery type compatibility (EFB, AGM, STD, GEL).

Penunjuk LED:

The OptiMATE 2 utilizes a series of LEDs to communicate the charging status and battery condition. Refer to the labels on the charger for specific indicator meanings:

  • Power/Input LED: Indicates the charger is connected to AC power (100-240V~50-60Hz).
  • Bateri Voltage LEDs (2V, 14.4V, 13.6V): Show the current battery voltage level during charging and maintenance.
  • Charging Step LEDs (1, 2, 3, 4): Indicate the active step in the 4-step charging and maintenance program.
  • Battery Type Indicators (EFB, AGM, STD, GEL): Highlight the types of 12V batteries the charger is compatible with.
  • Error/Warning LED: Illuminates to indicate a problem, such as reverse polarity connection or a severely damaged battery.

5. Persediaan

  1. Sediakan Bateri: Ensure the battery terminals are clean and free of corrosion. If the battery is in a vehicle, ensure the vehicle's ignition is off.
  2. Pilih Penyambung: Select either the standard battery clips or the weatherproof battery lead (ring terminals) based on your application.
  3. Sambung ke Bateri:
    • Sambungkan MERAH (+) charger lead to the POSITIF (+) terminal bateri.
    • Sambungkan HITAM (-) charger lead to the NEGATIF (-) terminal bateri.

    Note: The charger features reverse polarity protection. If connected incorrectly, an error LED will illuminate, and charging will not begin. Correct the connection before proceeding.

  4. Sambungkan ke Kuasa AC: Plug the charger's AC supply lead into a standard 100-240V 50-60Hz wall outlet. The power/input LED on the charger should illuminate.

6. Operating Instructions (4-Step Program)

The OptiMATE 2 operates automatically once connected. It follows a 4-step program to charge, save, and maintain your 12V battery.

  1. Step 1: Initialization & Low Volt Save: The charger first checks the battery's voltage. If the battery is deeply discharged (as low as 2V), the OptiMATE 2 will attempt to recover it with a low-current 'save' mode.
  2. Step 2: Bulk Charge: Sebaik sahaja bateri voltage is stable, the charger delivers a constant current (0.8A) to rapidly bring the battery to approximately 80% charge.
  3. Step 3: Absorption Charge: The charger then switches to a constant voltage charge (e.g., 14.4V) to fully charge the battery, ensuring all cells are equally charged.
  4. Step 4: Float / Maintenance Charge: After the battery is fully charged, the OptiMATE 2 automatically switches to a long-term maintenance mode (e.g., 13.6V). In this mode, the charger monitors the battery and delivers small pulses of current as needed to counteract self-discharge, keeping the battery optimally charged without overcharging. This 'connect & forget' feature is ideal for seasonal vehicles or long-term storage.

7. Penyelenggaraan

The OptiMATE 2 is designed for automatic long-term battery maintenance. For optimal battery life and charger performance, consider the following:

  • Sambungan Berterusan: For batteries in seasonal vehicles or those stored for extended periods, leave the OptiMATE 2 connected. It will automatically switch to maintenance mode to prevent self-discharge.
  • Sambungan Bersih: Periodically inspect and clean battery terminals and charger connectors to ensure good electrical contact.
  • Penjagaan Pengecas: Keep the charger unit clean and dry. Avoid exposing it to extreme physical shock.

8. Penyelesaian masalah

MasalahKemungkinan PuncaPenyelesaian
No LEDs illuminate when connected to AC power.No AC power supply.Check wall outlet, power cord, and circuit breaker.
Error/Warning LED illuminates.Sambungan kekutuban terbalik.Disconnect from AC power, correct battery lead connections (red to +, black to -), then reconnect AC power.
Error/Warning LED illuminates.Severely damaged or short-circuited battery.Have the battery professionally tested. The charger may not be able to recover it.
Charger remains in Step 1 (Low Volt Save) for an extended period.Battery is deeply discharged or sulfated.Allow the charger more time. If it does not progress after 24 hours, the battery may be beyond recovery.

9. Spesifikasi

  • model: TM-421
  • Input Voltage: 100-240V AC, 50-60Hz
  • Keluaran Voltage: 12V DC
  • Mengecas Arus: 0.8A (constant current)
  • Kapasiti Bateri: 3 - 96Ah
  • Jenis Bateri: STD, AGM, EFB, GEL 12V lead-acid batteries
  • Suhu Operasi: -4°F hingga 104°F (-20°C hingga 40°C)
  • Dimensi: 8.25 x 6.5 x 2.5 inci
  • Berat: 12.2 auns (0.76 paun)
  • Lampiran: Weatherproof case with wall mounts
  • AC Supply Lead: 6 kaki / 180cm
  • Charge Lead: 6ft / 180cm, ending in SAE connector
  • Pematuhan Keselamatan: CEC listed, SAE specification met

10. Waranti & Sokongan

For warranty information, technical support, or service inquiries, please refer to the documentation included with your product or visit the official Tecmate webtapak. Simpan resit pembelian anda sebagai bukti pembelian.

For additional assistance, you may contact Tecmate Powersport Products, North America Inc.

Dokumen Berkaitan - TM-421

Praview OptiMate 4 DUAL Program: Automatická 12V nabíjačka batérií - Návod na použitie
Podrobný návod na použitie pre automatickú diagnostickú nabíjačku batérií tecMATE OptiMate 4 DUAL Program. Pokrýva bezpečnosť, funkcie nabíjania, testovania a údržby pre 12V olovené, AGM, MF a GEL akumulátory.
Praview Manual Pengguna Pengecas Penyelenggaraan Automatik OptiMATE 2
Manual pengguna yang komprehensif untuk pengecas bateri automatik OptiMATE 2 (Model TM420/TM421). Termasuk arahan keselamatan, prosedur pengecasan, penunjuk LED, penyelenggaraan dan maklumat waranti untuk bateri asid plumbum 12V.
Praview OptiMate 6 Select 12V 6A Automatic Battery Charger User Manual
Comprehensive user manual for the TecMate OptiMate 6 Select 12V 6A automatic battery charger. Learn about its features, safety instructions, and operating procedures for 12V lead-acid batteries.
Praview Manual Pengguna Pengecas Bateri Program Dwi OptiMATE 4
Manual pengguna yang komprehensif untuk pengecas bateri TecMate OptiMATE 4 Dual Program, operasi terperinci, arahan keselamatan dan diagnostik untuk bateri asid plumbum 12V. Menyokong jenis STD, AGM, MF dan GEL.
Praview TecMate OptiMATE 4 Automatic Battery Charger User Manual
Comprehensive guide to using the TecMate OptiMATE 4 automatic diagnostic battery charger for 12V lead-acid batteries. Includes instructions, safety precautions, program details, and warranty information.
Praview OptiMATE4 Dual Program Battery Charger: User Manual and Safety Instructions
Comprehensive user manual and safety guide for the TecMate OptiMATE4 Dual Program automatic diagnostic battery charger. Covers charging, testing, and maintenance for 12V lead-acid batteries, with multi-language support.