Central Pneumatic Air File Manual Arahan

1. Pengenalan

The Central Pneumatic Air File is a compact and efficient pneumatic tool designed for material removal and filing in tight or hard-to-reach spots. This versatile tool utilizes compressed air to provide rapid filing action, making it suitable for various applications where precision and speed are required.

Ciri-ciri Utama:

• Penggunaan Udara: Approximately 8.5 CFM (Cubic Feet per Minute)
• Tekanan Kerja: Requires 90 PSI (Pounds per Square Inch) for optimal performance
• Operasi Bunyi Rendah: Designed for reduced operational noise

Figure 1: The Central Pneumatic Air File shown with its four interchangeable files: flat cut, half round, round, and triangular. This image displays the main body of the air file, the air inlet, and the file mekanisme lampiran.

2. Maklumat Keselamatan

Always observe basic safety precautions when using this product to reduce the risk of personal injury and damage to the tool. Read and understand all instructions before operation.

• Pakai peralatan pelindung diri (PPE) yang sesuai, termasuk cermin mata keselamatan, perlindungan pendengaran, dan sarung tangan.
• Pastikan kawasan kerja bersih, terang dan bebas daripada halangan.
• Do not operate the air file if you are tired or under the influence of drugs, alcohol, or medication.
• Putuskan sambungan bekalan udara sebelum membuat sebarang pelarasan, menukar aksesori atau melakukan penyelenggaraan.
• Jangan melebihi tekanan udara maksimum yang disyorkan iaitu 90 PSI.
• Keep hands and body parts clear of the moving file semasa operasi.
• Use only accessories and replacement parts recommended by the manufacturer.
• Simpan alat di tempat yang kering dan selamat dari jangkauan kanak-kanak.

3. Kandungan Pakej

Selepas membuka pakej, sahkan bahawa semua komponen ada dan tidak rosak:

• Central Pneumatic Air File Unit
• Potongan Rata File
• Separuh Bulat File
• Bulat File
• segi tiga File
• Manual Arahan (dokumen ini)

If any items are missing or damaged, please contact Central Pneumatic customer service immediately.

4. Persediaan

Proper setup is crucial for the safe and efficient operation of your air file.

4.1 Sambungan Bekalan Udara:

1. Pastikan pemampat udara anda dimatikan dan tangki udara telah dikeringkan.
2. Connect a standard 1/4 inch NPT air hose (not included) to the air inlet on the rear of the air file. Use thread sealant tape for a secure, leak-free connection.
3. Connect the other end of the air hose to your air compressor's regulated output.
4. Set your air compressor's regulator to 90 PSI. Do not exceed this pressure.

4.2 Compressor Requirements:

The performance of your air file is directly related to the capacity of your air compressor. Refer to the chart below for recommended compressor tank sizes based on usage:

Figure 2: This chart illustrates the recommended air compressor tank sizes for optimal performance of the air file. For continuous use, a 29+ gallon compressor is recommended. For intermittent use, 7-28 gallon compressors are suitable. 1-6 gallon compressors are not recommended.

4.3 Pelinciran Awal:

Before first use, and regularly thereafter, add 3-5 drops of pneumatic tool oil (not included) into the air inlet of the tool. This lubricates the internal components and ensures smooth operation and longevity.

4.4 Attaching a File:

1. Pastikan udara file is disconnected from the air supply.
2. Identify the desired file type (flat cut, half round, round, or triangular) for your task.
3. Insert the shank of the file into the chuck opening at the front of the air file.
4. Selamatkan file by tightening the chuck collar or mechanism (refer to tool specific design for exact method, typically a set screw or quick-release). Ensure the file is firmly seated and cannot wobble.

5. Arahan Operasi

Once the air file is properly set up and connected to the air supply, you can begin operation.

1. Sediakan Bahan Kerja: Secure the material you intend to file in a vise or clamp to prevent movement during operation.
2. Pegang Alat: Hold the air file firmly with both hands if possible, or with one hand providing stable control.
3. Aktifkan Alat: Depress the trigger or lever located on the top of the tool to start the filing action. The file will begin to reciprocate rapidly.
4. Sapukan pada Bahan Kerja: Gently bring the moving file into contact with the workpiece. Apply light, consistent pressure. Avoid excessive force, as this can bog down the tool and reduce its effectiveness, potentially causing premature wear or damage.
5. Kawalan Pergerakan: Bimbinglah file along the desired path, allowing the tool to do the work. The different file shapes allow for various applications, such as flat surfaces, curves, or internal angles.
6. Deactivate Tool: Release the trigger to stop the filing action.
7. Periksa Kerja: Periodically stop and inspect your work to ensure you are achieving the desired result.

Nota: The tool operates at a stroke rate of approximately 3,700 strokes per minute, providing fast material removal. Always maintain a firm grip and control.

6. Penyelenggaraan

Regular maintenance will extend the life of your Central Pneumatic Air File and ensure its continued performance.

6.1 Pelinciran:

• Add 3-5 drops of pneumatic tool oil into the air inlet before each use, or at least once daily if used frequently.
• Run the tool for a few seconds after oiling to distribute the lubricant.

6.2 Pembersihan:

• Selepas setiap penggunaan, putuskan sambungan bekalan udara dan lap alat dengan kain bersih dan kering.
• Remove any debris or filings from the chuck area and the file itself. A stiff brush can be used for the files.

6.3 Storan:

• Store the air file in a clean, dry environment, away from excessive moisture or extreme temperatures.
• Ensure the tool is disconnected from the air supply before storage.

7. Penyelesaian masalah

If you encounter issues with your Central Pneumatic Air File, rujuk kepada masalah dan penyelesaian biasa berikut:

8. Spesifikasi

9. Waranti dan Sokongan

For information regarding warranty coverage, technical support, or replacement parts for your Central Pneumatic Air File, please refer to the warranty card included with your purchase or visit the official Central Pneumatic website. You may also contact their customer service directly for assistance.

Adalah disyorkan untuk menyimpan resit pembelian anda sebagai bukti pembelian bagi sebarang tuntutan jaminan.