Manual Pengguna Bekalan Kuasa Linear PeakTech 6150

1. Pengenalan

The PeakTech 6150 is a high-quality, 3-channel linear laboratory power supply designed for precise and stable DC voltage and current output. It features a modern design with 3-digit blue LED displays for quick and accurate readings of voltage and current values. This manual provides essential information for the safe and efficient operation, setup, and maintenance of your PeakTech 6150 power supply.

Rajah 1: Depan view of the PeakTech 6150 Linear Power Supply, showing the display, control knobs, and output terminals.

2. Arahan Keselamatan

Please read and understand all safety instructions before operating the device. Failure to comply with these instructions may result in electric shock, fire, or damage to the device.

• Sentiasa sambungkan peranti ke salur keluar kuasa yang dibumikan.
• Jangan kendalikan peranti dalam keadaan basah atau damp syarat.
• Pastikan pengudaraan yang betul untuk mengelakkan terlalu panas. Jangan sekat bukaan pengudaraan.
• Jangan buka peranti casing. Rujuk semua servis kepada kakitangan yang berkelayakan.
• Sahkan input voltage matches the device's requirements before connecting to power.
• Always disconnect power before making or changing connections to the output terminals.
• The device is equipped with overload and short-circuit protection. However, avoid intentional short circuits or exceeding current limits for prolonged periods.
• This device complies with safety standard EN 61010-1.

3. Ciri-ciri Produk

The PeakTech 6150 power supply offers the following key features:

• Linear design for stable and low-noise output.
• Adjustable main output: 0-30V DC and 0-5A DC.
• Memperbaiki voltage outputs: 5V/500mA and 12V/500mA with excellent stability and low ripple.
• 3-digit blue LED displays for simultaneous voltage dan bacaan semasa.
• Pemalar automatik voltage (CV) and constant current (CC) mode selection.
• Continuously adjustable current limit in constant current mode.
• 4mm safety sockets for secure connections.
• Output disable function for safe connection/disconnection of loads.
• Comprehensive overload and short-circuit protection.

4. Kandungan Pakej

Setelah membuka bungkusan, sila sahkan bahawa semua barang ada dan tidak rosak:

• PeakTech 6150 Linear Power Supply Unit
• Kabel Kuasa
• Manual Pengguna

Jika terdapat sebarang barang yang hilang atau rosak, sila hubungi pembekal anda dengan segera.

5. Persediaan

1. penempatan: Place the power supply on a stable, level surface with adequate ventilation space around it. Ensure the rear fan is not obstructed.
2. Sambungan Kuasa: Connect the provided power cable to the AC input socket on the rear panel of the device. Plug the other end into a suitable grounded AC power outlet.
3. Semakan Awal: Before connecting any load, ensure the main output voltage and current knobs are set to their minimum positions (fully counter-clockwise).

Rajah 2: Belakang view of the PeakTech 6150 Linear Power Supply, showing the power input and ventilation fan.

6. Arahan Operasi

6.1. Menghidupkan/Mematikan

• Press the "POWER" switch on the front panel to turn the unit ON. The LED displays will illuminate.
• To turn OFF, press the "POWER" switch again.

6.2. Adjustable Main Output (0-30V / 0-5A)

1. Beban Penyambungan: Ensure the "OUTPUT" switch is OFF (LED off). Connect your load to the main output terminals (red for positive, black for negative) using 4mm safety banana plugs.
2. Tetapan Voltage: Use the "VOLTAGE" knob to adjust the desired output voltage. Jilidtage will be displayed on the right LED display.
3. Menetapkan Had Semasa: Use the "CURRENT" knob to set the maximum current limit. This is crucial for protecting your circuit. The current limit is displayed on the left LED display when the unit is in Constant Current (CC) mode or when adjusting the knob.
4. Activating Output: Sekali voltage and current limits are set, press the "OUTPUT" switch to turn the output ON (LED illuminates).
5. Pemalar VoltagMod e (CV): When the load current is below the set current limit, the power supply operates in Constant Voltage (CV) mode, maintaining the set voltage. The "CV" indicator LED will be lit.
6. Mod Arus Malar (CC): If the load current attempts to exceed the set current limit, the power supply automatically switches to Constant Current (CC) mode, maintaining the set current by reducing the output voltage. The "CC" indicator LED will be lit.

6.3. Vol. Tetaptage Outputs (5V/500mA, 12V/500mA)

The PeakTech 6150 also provides two fixed voltage outputs: 5V at 500mA and 12V at 500mA. These outputs are always active when the unit is powered on and are independent of the main adjustable output.

• Connect your load to the respective 5V/500mA (red/blue terminals) or 12V/500mA (red/blue terminals) safety sockets.
• Ensure the load does not exceed the 500mA current rating for these outputs.

Figure 3: PeakTech 6150 Linear Power Supply in a typical laboratory setup, demonstrating its compact size and clear display.

7. Penyelenggaraan

The PeakTech 6150 power supply requires minimal maintenance.

• Pembersihan: Putuskan sambungan bekalan kuasa daripada sesalur kuasa sebelum membersihkan. Gunakan kain lembut dan kering untuk mengelap bahagian luar. Jangan gunakan pembersih atau pelarut yang kasar.
• Pengudaraan: Periodically check that the ventilation openings and fan are free from dust and debris. Use compressed air to clear if necessary.
• Storan: Apabila tidak digunakan untuk tempoh yang lama, simpan peranti di tempat yang sejuk dan kering, jauh dari cahaya matahari langsung dan suhu yang melampau.
• Servis: There are no user-serviceable parts inside. Do not attempt to open or repair the unit yourself. Contact qualified service personnel for any repairs.

8. Penyelesaian masalah

If you encounter issues with your PeakTech 6150, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact PeakTech customer support.

9. Spesifikasi

10. Waranti dan Sokongan

PeakTech products are manufactured under strict quality control. In the unlikely event of a defect, please contact your dealer or PeakTech directly.

For technical support or warranty inquiries, please refer to the contact information provided with your purchase documentation or visit the official PeakTech webtapak: www.peaktech.de.

Please have your model number (P 6150) and purchase date ready when contacting support.