pengenalan
This manual provides instructions for the installation, operation, and maintenance of the Westbrass Pull & Drain Bath Waste assembly, model D3264-12. This system is designed for bathtub drainage and features a convenient pull-to-open and press-to-close drain stopper. Please read these instructions thoroughly before beginning installation or operation.
Maklumat Keselamatan
- Always turn off the main water supply to the bathtub before beginning any installation or maintenance.
- Pakai peralatan pelindung diri yang sesuai, seperti cermin mata keselamatan dan sarung tangan, semasa pemasangan.
- Pastikan semua sambungan selamat untuk mengelakkan kebocoran.
- Jika anda tidak pasti tentang sebarang langkah atau menghadapi kesukaran, rujuk kepada tukang paip yang berkelayakan.
Kandungan Pakej
Sahkan bahawa semua komponen hadir sebelum memulakan pemasangan:
- 1-1/2 inch Brass Tubular Bath Waste Assembly
- Pull & Drain Bathtub Drain Plug (D3324)
- Two-hole Faceplate (D329)
- Two (2) 1/4 inch-20 x 1-1/2 inch Plated Brass Screws
- 17 Gauge Brass Tubes (22-1/2 inch maximum make-up)
- Two-hole Top Elbow, Shoe, and Tee
- Brass Half-Ferrules
Rajah 1: Meletup view showing all components of the bath waste assembly, including the overflow pipe, tee, shoe, drain stopper, and faceplate.
Persediaan dan Pemasangan
Follow these steps for proper installation of your Westbrass D3264-12 bath waste assembly:
- Sediakan Tab Mandi: Ensure the bathtub overflow and drain openings are clean and free of debris.
- Assemble the Overflow:
- Attach the overflow pipe to the two-hole top elbow.
- Secure the overflow faceplate (D329) to the overflow opening on the bathtub using the provided plated brass screws. Ensure the gasket is properly seated between the faceplate and the tub.
- Assemble the Drain Shoe:
- Connect the drain shoe to the horizontal drain pipe.
- Insert the drain stopper assembly (D3324) into the drain shoe opening. Ensure the rubber gasket is correctly positioned to create a watertight seal.
- Connect the Assembly:
- Connect the overflow assembly and the drain shoe assembly using the tee fitting and brass half-ferrules. Adjust the length of the brass tubes as needed to fit your bathtub's dimensions (maximum 22-1/2 inches make-up).
- Tighten all slip joint connections securely, but do not overtighten.
- Ujian untuk Kebocoran: Fill the bathtub with water and check all connections for any signs of leakage. Tighten connections further if necessary.
Figure 2: The Westbrass bath waste assembly shown installed in a bathtub, illustrating the overflow plate and drain stopper in position.
Figure 3: Detailed technical drawing providing dimensions and component breakdown for installation reference.
Arahan Operasi
The Westbrass D3264-12 features a simple pull & drain mechanism:
- Untuk Menutup Parit: Firmly press the drain stopper down into the drain opening. This will seal the drain, allowing the tub to fill with water.
- Untuk Membuka Longkang: Pull the drain stopper up. This will unseal the drain, allowing water to flow out of the tub.
Figure 4: Close-up of the pull & drain stopper, illustrating its design for easy operation.
Penyelenggaraan
To ensure the longevity and proper function of your bath waste assembly:
- Pembersihan: Regularly clean the visible components (drain stopper and overflow faceplate) with a soft cloth and a mild, non-abrasive cleaner. Avoid using harsh chemicals, abrasive pads, or strong detergents, as these can damage the Oil Rubbed Bronze finish.
- Pemeriksaan: Periodically inspect the drain stopper for any hair or debris accumulation that might impede its operation. Remove any obstructions carefully.
- Gasket: If leaks occur, inspect the gaskets for wear or damage. Replace if necessary.
Menyelesaikan masalah
- Kebocoran:
- Check all slip joint connections for tightness. Ensure they are snug but not overtightened.
- Verify that all gaskets are properly seated and undamaged. Replace any worn or damaged gaskets.
- Drain Stopper Not Sealing:
- Inspect the stopper for debris (e.g., hair, soap residue) that might prevent a proper seal. Clean thoroughly.
- Ensure the stopper mechanism is fully engaged when pressed down.
- Saliran perlahan:
- Check for blockages in the drain pipe. This may require disassembling parts of the drain assembly or using a plumbing snake.
Spesifikasi
Figure 5: Dimensional diagram of the bath waste assembly.
| Ciri | Perincian |
|---|---|
| Nombor Model | D3264-12 |
| Jenama | Westbrass |
| bahan | Tembaga |
| Warna Selesai | Gangsa Digosok Minyak |
| Tubing Gauge | Tolok 17 |
| Maximum Make-Up | 22-1/2 inci |
| Dimensi Produk (Dipasang) | 11"W x 22.5"H |
| Berat Barang | 6.75 paun |
| UPC | 747028264129 |
Maklumat Waranti
The Westbrass D3264-12 Pull & Drain Bath Waste assembly is covered by a Waranti terhad 1 tahun. This warranty covers defects in materials and workmanship under normal use and service. For specific terms and conditions, or to make a warranty claim, please contact Westbrass customer support directly.
Sokongan Pelanggan
For technical assistance, replacement parts, or any questions regarding your Westbrass D3264-12 bath waste assembly, please contact Westbrass customer service:
- Webtapak: www.westbrass.com
- Refer to the product packaging or the official Westbrass webtapak untuk maklumat hubungan terkini.
