pengenalan
Thank you for choosing the STEINEL HS 152 XENO Sensor Halogen Floodlight. This product is designed to provide efficient and reliable outdoor lighting with integrated motion detection for enhanced security and convenience. Please read this manual carefully to ensure proper installation, operation, and maintenance of your floodlight.
Image: STEINEL HS 152 XENO Sensor Halogen Floodlight. This image shows the floodlight from a front-side angle, highlighting its compact design and the integrated motion sensor below the lamp perumahan.
Arahan Keselamatan
WARNING: Risk of electric shock! Installation requires knowledge of electrical systems. Incorrect installation can lead to fire or electric shock. For your safety, always consult a qualified electrician if you have any doubts.
- Disconnect power at the main fuse or circuit breaker before installation or maintenance.
- Pastikan bekalan voltage matches the floodlight's requirements (230-240V).
- Do not open the product housing unless specified in this manual.
- Jangan ubah suai produk dalam apa jua cara.
- Jauhkan kanak-kanak daripada bahan pembungkusan.
- The floodlight becomes hot during operation. Avoid touching the lamp or housing immediately after use.
- Pastikan pembumian yang betul mengikut kod elektrik tempatan.
- This product is rated IP44 for protection against splashing water. Do not immerse in water.
Kandungan Pakej
Please check that all parts are present and undamaged:
- 1x STEINEL HS 152 XENO Sensor Halogen Floodlight (with integrated R7s 150W halogen lamp)
- 1x Set of mounting screws and wall plugs
- 1x Set of cover plates for detection range adjustment
- 1x Manual Arahan
Pemasangan
- Penyediaan: Turn off the power supply at the main circuit breaker. Use a voltage tester to ensure the circuit is de-energized.
- Lokasi Pemasangan: Choose a suitable mounting location, ideally 1.8m to 2.5m above the ground, where the sensor has an unobstructed view of the desired detection area. Avoid mounting near heat sources or objects that might cause false triggers (e.g., moving branches, busy roads).
- Penggerudian: Mark the drilling points using the floodlight's mounting plate as a template. Drill holes and insert wall plugs.
- Pendawaian: Connect the electrical wires (Live, Neutral, Earth) from your mains supply to the corresponding terminals inside the floodlight's wiring compartment. Ensure all connections are secure.
- Mounting the Floodlight: Secure the floodlight to the wall using the provided screws. Adjust the floodlight head to the desired angle.
- Hidupkan kuasa: Restore power at the main circuit breaker. The floodlight will perform a brief self-test.
Operasi
The STEINEL HS 152 XENO floodlight features an integrated passive infrared (PIR) motion sensor. When motion is detected within its adjustable range and the ambient light level falls below the set twilight threshold, the floodlight will automatically switch on for the pre-set duration.
Pelarasan Sensor
The sensor has three main adjustment controls, typically located on the underside of the sensor head:
- Range (Reach): Adjusts the detection distance, up to 12 meters, limitable to approximately 5 meters using the included cover plates. Turn the dial to increase or decrease the range.
- Twilight Threshold (Lux): Sets the ambient light level at which the sensor becomes active. Turn towards the sun symbol for daylight operation (test mode) or towards the moon symbol for activation only in darkness.
- Time Setting (Time): Determines how long the light remains on after motion is detected. Adjust the dial to set the desired duration.
The detection angle is 180° with an opening angle of 90°. Use the provided cover plates to precisely mask out areas you do not wish to be detected, such as public pathways or neighboring properties.
Penyelenggaraan
Pembersihan
Clean the floodlight and sensor lens regularly with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the surfaces or the sensor lens.
Lamp Penggantian
WARNING: Disconnect power before replacing the lamp.
- Ensure the floodlight is cool before handling.
- Berhati-hati membuka lamp perumahan.
- Remove the old R7s halogen lamp.
- Insert a new R7s 150W halogen lamp. Ensure it is correctly seated.
- Tutup lamp housing securely.
- Pulihkan kuasa.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Cahaya tidak menyala. | Tiada bekalan kuasa. Lamp rosak. Twilight threshold set too high (daylight). Sensor range too low. | Periksa pemutus litar. Gantikan lamp. Adjust twilight setting towards 'moon' symbol. Increase sensor range. |
| Lampu kekal menyala secara berterusan. | Pergerakan berterusan dalam kawasan pengesanan. Sensor rosak. | Adjust sensor range or mask detection area. Hubungi sokongan pelanggan. |
| Light turns on without apparent motion. | False triggers (e.g., heat sources, small animals, moving branches). | Adjust sensor angle, reduce range, or use cover plates to mask problematic areas. |
Spesifikasi
| Jenama: | STEINEL |
| Nombor Model: | 632113 |
| warna: | Hitam (Note: Product title indicates 'ws' for white, but specifications list 'Noir' for black.) |
| Ciri Khas: | Pengesan Pergerakan |
| Bahan: | kaca |
| Sumber Kuasa: | Elektrik Bertali |
| Jenis Sumber Cahaya: | Halogen |
| Bilangan Sumber Cahaya: | 1 |
| Voltage: | 230 Volt |
| Wattage: | 150 Watt |
| Kelas Perlindungan: | IP44 |
| Sudut Pengesanan: | 180° (Opening angle 90°) |
| Maks. Julat Pengesanan: | 12 meter (boleh laras sehingga 5 meter) |
Waranti dan Sokongan
Untuk maklumat waranti dan sokongan teknikal, sila rujuk kepada STEINEL rasmi website or contact your local STEINEL distributor. Keep your purchase receipt as proof of purchase.
STEINEL Contact Information:
- Official STEINEL Webtapak
- Refer to product packaging for specific regional support contacts.