Extel 750530 4-Channel Remote Control User Manual

1. Pengenalan

This manual provides essential instructions for the proper setup, operation, and maintenance of your Extel 750530 4-channel remote control. Please read this manual thoroughly before using the device to ensure safe and efficient operation. Keep this manual for future reference.

2. Produk Lebihview

The Extel 750530 is a 4-channel supplementary remote control designed for use with Extel gate and garage door automation systems. It features a robust design and utilizes rolling code technology for enhanced security. With a range of approximately 30 meters, it provides convenient control over your compatible automation devices.

• Kawalan 4 Saluran: Allows control of up to four different automation functions or devices.
• 30-Meter Range: Menyediakan ample operating distance for most applications.
• Rolling Code Security: Enhances protection against unauthorized access.
• Reka bentuk ergonomik: Selesa untuk dipegang dan digunakan.

Rajah 2.1: Depan view of the Extel 750530 remote control, showing the four control buttons and the Extel logo.

Rajah 2.2: Bersudut view of the Extel 750530 remote control, highlighting its compact and ergonomic design.

Rajah 2.3: Sisi view of the Extel 750530 remote control, showing its slim profile.

3. Spesifikasi

4. Persediaan dan Berpasangan

The Extel 750530 remote control uses a rolling code system for secure communication with your automation unit. To set up your remote, it must be paired with your existing Extel gate or garage door automation system.

4.1. Prosedur Penggandingan Umum

Penting: The exact pairing procedure may vary depending on your specific Extel automation system model. Always refer to the instruction manual provided with your gate or garage door automation unit for detailed and accurate pairing steps. The following is a general guide:

1. Access the Receiver: Locate the control unit or receiver for your Extel automation system. This is typically found near the motor of your gate or garage door.
2. Aktifkan Mod Pembelajaran: Press and hold the programming or 'Learn' button on your automation system's receiver. The indicator light on the receiver will usually change (e.g., flash, turn solid) to indicate it is in learning mode.
3. Transmit Remote Signal: While the receiver is in learning mode, press and hold the desired button on your new Extel 750530 remote control that you wish to assign to a function (e.g., opening the gate). Hold the button until the receiver's indicator light responds (e.g., flashes rapidly, turns off, or changes color) to confirm successful pairing.
4. Operasi Ujian: Once paired, release the buttons and test the remote control's function from a safe distance.
5. Pair Additional Buttons (if needed): Repeat steps 2-4 for any other buttons on the remote control that you wish to assign to different functions (e.g., a second gate, pedestrian access, or a garage door).

If you encounter difficulties, consult the manual of your main automation system or contact Extel customer support.

Figure 4.1: A hand holding the Extel 750530 remote control, demonstrating its portable size.

5. Arahan Operasi

Once your Extel 750530 remote control is successfully paired with your automation system, operating it is straightforward.

1. Identify Functions: Each of the four buttons on your remote control will correspond to a specific function programmed during the pairing process (e.g., open/close gate, pedestrian mode, garage door).
2. Aktifkan Fungsi: Point the remote control towards your automation system (if line-of-sight is required, though RF typically does not) and press the corresponding button for the desired action.
3. Perhatikan Respons: The automation system should respond to the command (e.g., gate begins to open or close).
4. Julat: Ensure you are within the effective operating range of approximately 30 meters for reliable communication. Environmental factors can affect this range.

Figure 5.1: The Extel 750530 remote control being held in a car, illustrating its use for gate or garage access.

6. Penyelenggaraan

6.1. Penggantian Bateri

The remote control is powered by a small battery, typically a coin cell type. If the remote's range decreases significantly or it stops responding, the battery may need replacement.

1. Buka Casing: Buka alat kawalan jauh dengan berhati-hati casing. This usually involves prying it open with a small flat-head screwdriver at a designated notch, or unscrewing a small screw.
2. Kenal pasti Jenis Bateri: Note the type of battery (e.g., CR2032).
3. Gantikan Bateri: Remove the old battery and insert a new one of the same type, ensuring correct polarity (+/-).
4. Tutup Casing: Carefully snap or screw the casing back together.
5. Ujian: Test the remote control's functionality.

6.2. Pembersihan dan Penjagaan

• Keep the remote control dry and away from extreme temperatures.
• Bersihkan casindengan kain lembut dan kering. Elakkan menggunakan pembersih atau pelarut yang kasar.
• Do not drop the remote control or subject it to strong impacts.

7. Penyelesaian masalah

Figure 7.1: The Extel 750530 remote control depicted with a security shield, symbolizing its rolling code technology for enhanced security.

8. Waranti dan Sokongan

For information regarding warranty coverage, please refer to the documentation provided with your original purchase or contact your retailer. For technical support or further assistance, please visit the official Extel webtapak atau hubungi bahagian perkhidmatan pelanggan mereka.

Pengeluar: EXTEL