Manual Arahan Lampu Bawah Kabinet Bilik Mandi Rabalux 2322

1. Pengenalan

The Rabalux 2322 Bath Under-Cabinet Light is designed to provide efficient illumination and convenient power access in indoor environments. Its white finish integrates discreetly into various interior styles. This manual provides essential information for safe installation, operation, and maintenance of your Rabalux 2322 under-cabinet light.

Please read these instructions carefully before installation and use, and retain them for future reference.

Imej 1.1: Depan view of the Rabalux 2322 Under-Cabinet Light, showing the integrated fluorescent tube, power switch, and two electrical outlets on the right side.

2. Arahan Keselamatan

Untuk memastikan operasi yang selamat dan mencegah kerosakan, patuhi garis panduan keselamatan berikut:

• Penggunaan Dalaman Sahaja: This product is designed exclusively for indoor use in enclosed spaces.
• Pemutusan Kuasa: Always disconnect the main power supply before performing any installation, maintenance, cleaning, or lamp penggantian.
• Penilaian IP20: The fixture has an IP20 protection rating, meaning it is protected against solid objects larger than 12.5mm but has no protection against water. Do not install in areas where direct water contact or high humidity is present, despite the "Bath" designation which refers to style, not water resistance.
• Pemasangan Profesional: If you are not confident with electrical installations, consult a qualified electrician.
• Voltage: Pastikan bekalan kuasa voltage matches the product's requirements (230 Volt).
• Lamp Jenis: Gunakan hanya l yang ditentukanamp type (G13 T8 15W) for replacement.
• Pengudaraan: Pastikan pengudaraan yang mencukupi di sekeliling lekapan untuk mengelakkan terlalu panas.
• Pembersihan: Jangan gunakan agen pembersih yang melelas atau menghakis.

3. Kandungan Pakej

Sahkan bahawa semua komponen ada dan tidak rosak:

• 1 x Rabalux 2322 Under-Cabinet Light fixture
• 1 x T8 15W Fluorescent Tube (950 lm; 2700 K)
• Perkakasan pemasangan (skru, sauh)
• Manual Arahan

Note: A connection cable for power supply is not included and must be provided separately.

4. Persediaan dan Pemasangan

The Rabalux 2322 is designed for recessed mounting under cabinets or shelves. Follow these steps for installation:

1. Penyediaan: Pastikan bekalan kuasa utama ke kawasan pemasangan dimatikan pada pemutus litar.
2. Lokasi Pemasangan: Select a suitable, stable surface under a cabinet or shelf. Consider the dimensions of the fixture (60.5 cm length, 6.5 cm height, 8.5 cm depth) to ensure proper fit and clearance.
3. Penandaan: Use the fixture as a template to mark the drilling points for the mounting hardware.
4. Penggerudian: Gerudi lubang pandu di lokasi yang ditanda. Masukkan sauh dinding jika perlu.
5. Pendawaian: Connect the power supply cable (not included) to the terminal block inside the fixture. Ensure correct polarity (Live, Neutral, Earth) according to local electrical codes. The fixture is designed for AC power (230V).
6. Memasang Lekapan: Secure the fixture to the mounting surface using the provided screws.
7. Lamp Pemasangan: Carefully insert the T8 fluorescent tube into the G13 sockets. Ensure it is seated correctly.
8. Semakan Akhir: Periksa semula semua sambungan dan pastikan lekapan dipasang dengan selamat.
9. Hidupkan kuasa: Pulihkan kuasa pada pemutus litar.

Image 4.1: Dimensional drawing of the Rabalux 2322 Under-Cabinet Light, indicating a length of 605mm, a height of 65mm, and a depth of 85mm.

5. Arahan Operasi

The Rabalux 2322 Under-Cabinet Light is straightforward to operate:

• Operasi ringan: Use the integrated switch located on the right side of the fixture to turn the light ON or OFF.
• Alur Kuasa: The two integrated power outlets can be used to connect small electrical appliances. Ensure the total wattage of connected devices does not exceed the fixture's maximum capacity.
• Masa memanaskan badan: Pendarfluor lamps may require a few seconds to reach full brightness after being switched on. This is normal operation.

6. Penyelenggaraan

Regular maintenance ensures the longevity and optimal performance of your light fixture:

• Pembersihan: Putuskan kuasa sebelum membersihkan. Lap lekapan dengan kain lembut, kering, atau sedikit kering.amp cloth. Do not use harsh chemicals, abrasive cleaners, or solvents.
• Lamp Penggantian:
  1. Switch off the power supply at the main circuit breaker.
  2. Benarkan lamp to cool down if it has been recently in use.
  3. Carefully remove the old T8 fluorescent tube from its G13 sockets.
  4. Insert a new G13 T8 15W fluorescent tube, ensuring it is securely seated.
  5. Pulihkan kuasa.
• Pemeriksaan: Periodically check the fixture for any signs of damage, loose connections, or wear. If any issues are found, disconnect power and address them immediately.

7. Penyelesaian masalah

If you encounter problems with your Rabalux 2322 light, refer to the following common issues and solutions:

If the problem persists after attempting these solutions, consult a qualified electrician or contact Rabalux customer support.

8. Spesifikasi

9. Waranti dan Sokongan

Waranti: For detailed warranty information, please refer to the terms and conditions provided at the time of purchase or contact your retailer. Keep your proof of purchase for any warranty claims.

Sokongan: If you require technical assistance or have questions not covered in this manual, please contact Rabalux customer service through their official webtapak atau maklumat hubungan yang diberikan bersama produk anda.