pengenalan
This manual provides comprehensive instructions for the safe and effective use, installation, and maintenance of your MIPRO MB-70 Replacement Rechargeable 12V Battery. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.
Maklumat Keselamatan Penting
Sentiasa patuhi langkah berjaga-jaga keselamatan berikut untuk mengelakkan kecederaan atau kerosakan pada bateri dan peralatan yang disambungkan:
- jangan litar pintas terminal bateri.
- jangan expose the battery to extreme temperatures, direct sunlight, or fire.
- jangan rendam bateri di dalam air atau cecair lain.
- jangan attempt to open, disassemble, or modify the battery.
- Jauhkan bateri dari jangkauan kanak-kanak dan haiwan peliharaan.
- Buang bateri yang habis mengikut peraturan tempatan.
- Use only chargers specified for 12V lead-acid batteries.
Produk Selesaiview
The MIPRO MB-70 is a high-quality, rechargeable 12V lead-acid battery designed as a replacement for compatible MIPRO audio equipment and other devices requiring a 12V power source. It provides reliable and consistent power for extended operation.
Image 1: The MIPRO MB-70 Replacement Rechargeable 12V Battery. This image shows the compact, rectangular form factor of the battery, typically black or dark gray, with visible terminals for connection.
Arahan Pemasangan
Follow these steps to safely install the MIPRO MB-70 battery into your compatible device:
- Matikan Peranti: Ensure the device requiring the battery replacement is completely powered off and disconnected from any power sources.
- Cari Petak Bateri: Identify and open the battery compartment on your device. Refer to your device's manual for specific instructions.
- Keluarkan Bateri Lama: Carefully disconnect the old battery, noting the polarity (positive and negative terminals). Remove the old battery from the compartment.
- Masukkan Bateri Baharu: Insert the MIPRO MB-70 battery into the compartment, ensuring the terminals align correctly with the device's connectors. Connect the positive (+) terminal first, then the negative (-) terminal.
- Petak Selamat: Tutup dan selamatkan petak bateri.
- Caj Permulaan: It is recommended to fully charge the battery before its first use. Refer to the "Charging the Battery" section.
Mengecas Bateri
Untuk memastikan prestasi dan hayat bateri yang optimum, ikuti garis panduan pengecasan ini:
- Use a compatible 12V lead-acid battery charger. Using an incorrect charger can damage the battery or pose a safety risk.
- Connect the charger to the battery terminals, ensuring correct polarity (positive to positive, negative to negative).
- Palamkan pengecas ke salur keluar kuasa yang sesuai.
- Allow the battery to charge until the charger indicates a full charge (refer to your charger's instructions).
- Avoid overcharging, as this can reduce battery life. Disconnect the charger once the battery is fully charged.
- Isi bateri di tempat yang berventilasi baik.
Penyelenggaraan dan Penyimpanan Bateri
Proper maintenance and storage will extend the life of your MIPRO MB-70 battery:
- Pengecasan Biasa: If the battery is not used for extended periods, recharge it every 3-6 months to prevent deep discharge, which can permanently damage lead-acid batteries.
- Terminal Bersih: Keep the battery terminals clean and free of corrosion. Use a dry cloth to wipe them if necessary.
- Keadaan penyimpanan: Store the battery in a cool, dry place, away from direct sunlight and extreme temperatures. The ideal storage temperature is between 20°C and 25°C (68°F and 77°F).
- Elakkan Pelepasan Dalam: Do not allow the battery to completely discharge. Recharge it as soon as possible after use.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Bateri tidak dicas | Charger not connected properly; Faulty charger; Deeply discharged battery; Damaged battery. | Check charger connections; Try a different charger; Allow extended charging time for deeply discharged batteries (if applicable); Replace battery if damaged. |
| Short operating time after full charge | Battery capacity degradation; Incomplete charge; High power consumption by device. | Ensure full charge cycle; Consider battery replacement if capacity is significantly reduced; Check device for abnormal power draw. |
| Terminal bateri terhakis | Exposure to moisture or improper storage. | Clean terminals with a dry cloth or a soft brush. Ensure proper storage conditions. |
Jika anda menghadapi masalah yang tidak disenaraikan di sini atau jika penyelesaian tidak menyelesaikan masalah, sila hubungi sokongan pelanggan.
Spesifikasi
| Jenama | Mipro |
| Nombor Model | D5741 (MB-70) |
| Voltage | 12 Volt |
| Komposisi Sel Bateri | Asid Plumbum |
| Kapasiti Bateri | 4.5 Amp jam |
| Berat Barang | 3 paun (lebih kurang 1.36 kg) |
| UPC | 806593457418 |
| Tarikh Tersedia Pertama | 14 November 2012 |
Waranti dan Sokongan
For warranty information and technical support, please refer to the documentation provided with your original MIPRO product or visit the official MIPRO webtapak. Simpan resit pembelian anda sebagai bukti pembelian untuk tuntutan waranti.
Untuk bantuan lanjut, anda boleh menghubungi penjual secara terus melalui platform tempat pembelian dibuat.
Video Produk
Tiada video produk rasmi tersedia untuk pembenaman pada masa ini.
