Audio Kereta Excalibur X500.2 2-Saluran 1000W AmpManual Arahan liifier

1. Pengenalan

1.1 Produk Selesaiview

The Excalibur X500.2 is a compact 2-channel amplifier designed for car audio systems, offering a peak power output of 1000 watts. This amplifier provides flexible power options, delivering 2 × 50 W RMS at 4 Ohms or 1 × 150 W RMS when configured in bridged mode. It features advanced sound control capabilities, including adjustable high-pass and low-pass filters, and a bass boost function that allows for sound customization up to +12 dB. Integrated thermal and short-circuit protections ensure reliable operation. With its compact dimensions of 225 × 230 × 55 mm and a weight of approximately 1.95 kg, the X500.2 is suitable for installation in various vehicle types.

Figure 1: Excalibur X500.2 2-Channel 1000W Car Audio Amplifier. This image displays the top-down view daripada amppenguat, pertunjukancasing hitamnya casing with silver accents and the Excalibur logo.

2. Maklumat Keselamatan

Please read all instructions carefully before installing and operating your Excalibur X500.2 amppengalir. Kegagalan mematuhi garis panduan ini boleh mengakibatkan kerosakan pada amppengangkut, kenderaan atau kecederaan diri.

• Sentiasa cabut terminal bateri negatif kenderaan sebelum memulakan sebarang kerja elektrik.
• Pastikan pembumian yang betul untuk mengelakkan bahaya elektrik.
• Use appropriate gauge wiring for power and speaker connections as specified in this manual.
• Elakkan memasang amppenghawa dingin di lokasi yang terdedah kepada cahaya matahari langsung, haba berlebihan, kelembapan atau habuk.
• Jangan buka amppenguat casing. Tiada bahagian yang boleh diservis pengguna di dalamnya. Rujuk semua servis kepada kakitangan yang berkelayakan.
• Protect wiring from sharp edges and moving parts to prevent shorts and damage.

3. Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej:

• Excalibur X500.2 2-Channel Amplebih hidup
• Perkakasan Pemasangan (skru)
• Manual Pengguna (dokumen ini)
• Spare Fuse (if included)

4. Ciri-ciri Produk

• Flexible Power Output: Delivers 2 × 50 W RMS at 4 Ohms or 1 × 150 W RMS in bridged mode at 4 Ohms.
• Advanced Sound Control: Equipped with adjustable high-pass (HPF) and low-pass (LPF) filters for precise audio tuning.
• Fungsi Penggalak Bes: Provides bass amplification up to +12 dB for enhanced low-frequency response.
• Perlindungan Bersepadu: Features thermal and short-circuit protection circuits to ensure amplifier longevity and safe operation.
• Reka bentuk padat: Dimensions of 225 × 230 × 55 mm allow for versatile installation in various vehicle environments.

5. Kawalan dan Sambungan

5.1 Input and Control Panel

Figure 2: Input and Control Panel. This image shows the side of the amplifier featuring the RCA input jacks, crossover switches, gain control, bass boost, and treble controls.

• RCA Input (INPUT L/R): Connects to the RCA pre-out from your head unit or source.
• Crossover Switch (CROSSOVER): Selects between High Pass Filter (HPF), Low Pass Filter (LPF), or FULL range.
• HPF/LPF Frequency Control: Adjusts the cutoff frequency for the selected filter.
• Kawalan Keuntungan (GAIN): Padan dengan ampKepekaan input lifier terhadap aras output unit kepala anda.
• Bass Boost (BASS): Adjusts the level of bass enhancement.
• Treble Control (TREBLE): Adjusts the level of treble.

5.2 Power and Speaker Output Panel

Figure 3: Power and Speaker Output Panel. This image displays the opposite side of the amplifier, showing the power input terminals, fuse, and speaker output terminals.

• Ground Terminal (GND): Connects to a solid chassis ground point in the vehicle.
• Remote Terminal (REM): Connects to the remote turn-on lead from your head unit.
• +12V Power Terminal (+12V): Connects directly to the positive terminal of the vehicle's battery via an inline fuse.
• Fuse Holder (FUSE 30A): Contains the main protection fuse for the amplebih hidup.
• Power/Protection Indicators: LEDs indicating power status (green) and protection mode (red).
• Speaker Output Terminals (L/R, BRIDGE): Connects to your speakers. Use L and R for stereo operation, or BRIDGE for mono operation.

6. Persediaan dan Pemasangan

6.1 Memasang Amplebih hidup

Choose a mounting location that is dry, well-ventilated, and protected from direct sunlight and excessive heat. Ensure sufficient space around the amplifier for proper cooling. Use the provided mounting hardware to secure the amplifier firmly to a solid surface in your vehicle.

6.2 Sambungan Pendawaian

1. Pendawaian Kuasa: Run a power cable (minimum 8-gauge recommended) from the vehicle's positive battery terminal to the amplifier's +12V terminal. Install an inline fuse holder (30A) within 18 inches (45 cm) of the battery.
2. Ground Wiring: Connect a ground cable (same gauge as power cable) from the ampterminal GND pengubah suai ke permukaan logam yang bersih dan tidak dicat pada casis kenderaan. Pastikan sambungan elektrik yang kukuh.
3. Remote Turn-On Wiring: Connect a remote turn-on wire (18-gauge recommended) from your head unit's remote output to the ampTerminal REM liifier.
4. RCA Input Connections: Connect RCA cables from your head unit's pre-out to the amplifier's RCA INPUT L/R jacks.
5. Sambungan Pembesar Suara: Connect your speakers to the SPEAKER OUTPUT terminals. For stereo operation, connect left and right speakers to their respective terminals. For bridged mono operation, connect a single speaker to the BRIDGE terminals. Ensure correct polarity.

7. Arahan Operasi

7.1 Kuasa Permulaan

After all connections are made and verified, reconnect the vehicle's negative battery terminal. Turn on your head unit. The amplifier's power indicator LED should illuminate green. If the protection LED illuminates red, refer to the troubleshooting section.

7.2 Melaraskan Tetapan

• Pelarasan Keuntungan: Start with the gain control at minimum. Play a familiar piece of music at a moderate volume on your head unit. Slowly increase the amplifier's gain until you hear distortion, then back off slightly. This sets the maximum clean output.
• Tetapan Crossover:
  • HPF (Penapis Lulus Tinggi): Use for full-range speakers to block low frequencies, preventing distortion and improving clarity. Adjust the frequency to suit your speakers.
  • LPF (Penapis Lulus Rendah): Use for subwoofers to allow only low frequencies to pass, ensuring deep bass reproduction. Adjust the frequency to match your subwoofer's characteristics.
  • PENUH: Membenarkan semua frekuensi melaluinya.
• Bass Boost and Treble: Adjust these controls to fine-tune the sound to your personal preference. Use sparingly to avoid distortion.

8. Penyelenggaraan

The Excalibur X500.2 amplifier requires minimal maintenance. Keep the unit clean and free from dust and debris. Periodically check all wiring connections to ensure they are secure and free from corrosion. Do not use harsh chemicals or abrasive cleaners on the amppermukaan pengalir.

9. Penyelesaian masalah

10. Spesifikasi

11. Waranti dan Sokongan

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Excalibur webtapak. Simpan bukti pembelian anda untuk tuntutan waranti.