Intermatic IOS-DPBIF-IV Decorator PIR Occupancy Sensor User Manual

Produk Selesaiview

The Intermatic IOS-DPBIF-IV is a Decorator Passive Infrared (PIR) Occupancy Sensor designed for automatic lighting control. This sensor detects motion within its field of view to turn lights ON and OFF, providing energy savings and convenience. It features an ivory finish and is suitable for wall mounting.

Imej: Depan view of the Intermatic IOS-DPBIF-IV Decorator PIR Occupancy Sensor in ivory color. The top section houses the PIR lens, and the bottom section features a manual override button.

Ciri-ciri Utama:

• Adjustable time delay for lights to turn OFF, ranging from 15 seconds to 30 minutes.
• Wide coverage area of 150 degrees, covering up to 980 square feet.
• Automatic ON/OFF control based on occupancy detection.
• Compatible with CFL (Compact Fluorescent Lamp) lighting.
• Includes a decorator wall plate for a clean installation.

Persediaan dan Pemasangan

Maklumat Keselamatan Penting: Before beginning installation, ensure power is turned OFF at the circuit breaker or fuse box to avoid electrical shock. Installation should be performed by a qualified electrician or a knowledgeable individual familiar with electrical wiring.

1. Pemutusan Kuasa: Locate the circuit breaker or fuse that supplies power to the switch box where the sensor will be installed. Turn OFF the power. Verify power is off using a voltage penguji.
2. Keluarkan Suis Sedia Ada: Carefully remove the existing wall plate and switch from the electrical box. Disconnect the wires from the old switch, noting their connections (e.g., line, load, ground, neutral if present).
3. Pendawaian Sensor: Connect the wires from the wall box to the corresponding wires on the IOS-DPBIF-IV sensor. Refer to the wiring diagram provided with the product packaging for specific connections. Typically, this involves connecting the Line (hot), Load, and Ground wires. A neutral wire connection may also be required depending on the specific model and electrical code.
4. Memasang Sensor: Gently push the wired sensor into the electrical box. Secure it with the provided mounting screws.
5. Pasang Plat Dinding: Pasangkan plat dinding penghias ke atas sensor.
6. Pulihkan Kuasa: Hidupkan semula kuasa pada pemutus litar atau kotak fius.

Nota: For detailed wiring diagrams and specific electrical requirements, consult the full installation guide included with your product or available on the manufacturer's webtapak.

Arahan Operasi

The Intermatic IOS-DPBIF-IV sensor operates automatically based on detected occupancy. It also includes a manual override button.

Operasi automatik:

• When motion is detected within the sensor's 150-degree field of view, the connected lights will turn ON.
• The lights will remain ON as long as occupancy is detected.
• After no motion is detected for a preset time delay, the lights will automatically turn OFF. The time delay can be adjusted from 15 seconds to 30 minutes. Refer to the product's internal settings or instructions for adjusting this delay.

Pembatalan Manual:

The sensor features a manual push-button switch located on the front face. This button allows for manual control of the lights, overriding the automatic occupancy detection.

• Press to Turn ON/OFF: A single press of the button will toggle the lights ON or OFF, regardless of occupancy.
• Return to Automatic: After manual operation, the sensor typically returns to automatic mode after a period of time or upon the next detection of occupancy, depending on the specific model's logic. Consult the full manual for details on how manual override interacts with automatic mode.

Penyelenggaraan

The Intermatic IOS-DPBIF-IV Occupancy Sensor requires minimal maintenance to ensure optimal performance.

• Pembersihan: Periodically wipe the sensor lens and housing with a soft, dry cloth to remove dust or dirt. Do not use abrasive cleaners, solvents, or excessive moisture, as these can damage the unit.
• Pemeriksaan halangan: Ensure that the sensor's field of view is not obstructed by furniture, curtains, or other objects that could interfere with motion detection.
• Tiada Bahagian Boleh Diservis Pengguna: The sensor contains no user-serviceable parts. Do not attempt to open or repair the unit. Refer any issues to qualified service personnel.

Menyelesaikan masalah

If you experience issues with your Intermatic IOS-DPBIF-IV Occupancy Sensor, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, contact Intermatic customer support or consult a qualified electrician.

Spesifikasi

Maklumat Waranti

The Intermatic IOS-DPBIF-IV Occupancy Sensor comes with a Waranti terhad 2 tahun. This warranty covers defects in materials and workmanship under normal use. For specific terms, conditions, and details on how to make a warranty claim, please refer to the official warranty statement included with your product or visit the Intermatic webtapak.

Nota: The warranty typically covers product replacement for eligible defects.

Sokongan dan Sumber Lanjutan

For additional assistance, technical support, or to access the complete product documentation, please use the following resources:

• Panduan Pengguna Rasmi (PDF): Muat turun PDF
• Intermatik Webtapak: Lawati laman web rasmi Intermatic webtapak untuk maklumat produk, Soalan Lazim dan butiran hubungan.
• Perkhidmatan Pelanggan: Contact Intermatic customer service for direct support regarding installation, operation, or troubleshooting.