pengenalan
This manual provides comprehensive instructions for the operation and maintenance of your Sharp SPC500 LCD Alarm Clock. Please read this manual thoroughly before use to ensure proper functionality and longevity of your device.
Rajah 1: Depan view of the Sharp SPC500 LCD Alarm Clock, showing the digital time display and the Sharp logo.
Persediaan
1. Pemasangan Bateri
The Sharp SPC500 LCD Alarm Clock operates on two (2) AAA batteries (not included). Ensure correct polarity when inserting the batteries.
- Locate the battery compartment cover on the back or bottom of the clock.
- Tanggalkan penutup.
- Masukkan dua bateri AAA baharu, sepadan dengan terminal (+) dan (-) seperti yang ditunjukkan di dalam petak.
- Gantikan penutup petak bateri dengan selamat.
2. Penetapan Masa Awal
After installing batteries, the display may flash or show a default time. Proceed to set the current time.
Arahan Operasi
Menetapkan Masa Semasa
- Locate the "TIME SET" button, usually on the back or side of the clock. Press and hold it until the time display begins to flash.
- Use the "HOUR" and "MINUTE" buttons (often labeled with arrows or +/-) to adjust the hours and minutes. Pay attention to the AM/PM indicator.
- Press "TIME SET" again to confirm the time and exit the setting mode.
Menetapkan Masa Penggera
- Locate the "ALARM SET" button. Press and hold it until the alarm time display begins to flash.
- Use the "HOUR" and "MINUTE" buttons to adjust the desired alarm time. Observe the AM/PM indicator.
- Press "ALARM SET" again to confirm the alarm time.
- Ensure the alarm is activated by sliding the "ALARM ON/OFF" switch or pressing the "ALARM ON" button. An alarm icon (e.g., a bell) should appear on the display.
Snooze and Backlight Function
- Tunda: When the alarm sounds, press the large "SNOOZE/LIGHT" button on top of the clock to temporarily silence the alarm. The alarm will sound again after a few minutes (typically 5-9 minutes).
- Lampu latar: The clock features a backlight on demand. Press the "SNOOZE/LIGHT" button to illuminate the display for a few seconds, allowing you to view the time in low-light conditions.
Ciri-ciri
- 0.5" LCD display for clear time visibility.
- Ascending alarm volume, starting softly and gradually increasing to ensure you wake up.
- Backlight on demand for easy viewdalam gelap.
- Compact and portable design, ideal for travel or bedside use.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca / Penyelesaian |
|---|---|
| Paparan kosong atau malap. |
|
| Alarm does not sound or is too quiet. |
|
| Backlight does not stay on. |
|
| Masa tidak betul. |
|
Spesifikasi
| Jenama | tajam |
| Model | SPC500 |
| Jenis Paparan | LCD Digital |
| Sumber Kuasa | Dikuasakan oleh Bateri (2 x bateri AAA, tidak termasuk) |
| Ciri Khas | Alarm, Backlight on demand, Ascending alarm volume |
| Dimensi (L x W x H) | 9.53 x 6.22 x 5.08 sm (lebih kurang 3.75 x 2.45 x 2 inci) |
| Berat badan | 68.04 g (2.4 oz approx.) |
Penyelenggaraan
To ensure the longevity and proper functioning of your Sharp SPC500 LCD Alarm Clock, follow these simple maintenance guidelines:
- Pembersihan: Wipe the clock's exterior with a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents as they may damage the finish.
- Penggantian Bateri: Replace batteries promptly when the display becomes dim or the clock stops functioning correctly. Remove batteries if the clock will not be used for an extended period to prevent leakage.
- Persekitaran: Elakkan mendedahkan jam kepada suhu ekstrem, cahaya matahari langsung, kelembapan tinggi atau persekitaran berdebu.
Waranti dan Sokongan
The Sharp SPC500 LCD Alarm Clock comes with a Waranti terhad 1 tahun dari tarikh pembelian. Waranti ini meliputi kecacatan pembuatan di bawah penggunaan biasa.
For warranty claims, technical support, or further assistance, please contact Sharp customer service. Refer to the official Sharp webtapak atau dokumentasi pembelian anda untuk maklumat hubungan terkini.
Sila simpan bukti pembelian anda untuk tujuan waranti.
