pengenalan
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Technoline WS 9136-IT Weather Station. Please read this manual thoroughly before using the device to ensure proper functionality and longevity.
Produk Selesaiview
The Technoline WS 9136-IT is a versatile weather station designed to provide accurate indoor and outdoor temperature readings, along with weather forecasts and a radio-controlled clock. It features a clear display and user-friendly controls.

This image shows the Technoline WS 9136-IT Weather Station. The display features the current time (12:34), a DCF signal indicator, a weather forecast icon (partly cloudy), indoor temperature (23.5°C) with max/min values (25°C/18°C), and outdoor temperature (10.3°C) with max/min values (17°C/6°C). Buttons for 'SET', 'ALARM', 'MIN/MAX', and 'RESET' are visible below the display.
Ciri-ciri Utama:
- DCF-77 Radio-Controlled Clock with manual setting option
- Paparan Suhu Dalam dan Luaran
- Min/Max Temperature Memory
- Weather Forecast and Trend Display
- Alarm with Snooze Function
- Penunjuk Tahap Caj Bateri
- Wall-Mount or Tabletop Use
- Includes Wireless Outdoor Sensor
Persediaan
1. Pemasangan Bateri:
- Open the battery compartment on the back of the main unit and the outdoor sensor.
- Insert the required batteries (typically AA or AAA, refer to the device markings) ensuring correct polarity (+/-).
- Tutup petak bateri dengan selamat.
2. Peletakan Sensor:
- Place the outdoor sensor in a shaded, dry location, protected from direct sunlight and rain, to ensure accurate temperature readings.
- Ensure the sensor is within the effective transmission range (868 MHz) of the main unit, typically up to 30 meters in open air. Walls and obstacles may reduce this range.
3. Initial Synchronization:
- After battery installation, the main unit will automatically begin searching for the DCF-77 radio signal for time synchronization and the outdoor sensor signal.
- This process may take several minutes. Ensure the unit is placed away from potential interference sources like electronic devices.
- Once synchronized, the time and outdoor temperature will appear on the display.
Operasi
1. Penetapan Masa:
- automatik: The clock automatically synchronizes with the DCF-77 signal. A signal icon will indicate successful reception.
- Manual: If the DCF signal is unavailable, you can manually set the time using the 'SET' button. Press and hold 'SET' to enter time setting mode, then use other buttons (e.g., 'ALARM' or 'MIN/MAX') to adjust values and 'SET' to confirm.
2. Paparan Suhu:
- The display shows current indoor and outdoor temperatures.
- Press the 'MIN/MAX' button to view the recorded minimum and maximum temperatures for both indoor and outdoor environments. Press again to cycle through current, minimum, and maximum values.
- To reset the Min/Max memory, press and hold the 'MIN/MAX' button while the minimum or maximum values are displayed.
3. Ramalan Cuaca:
- The weather station predicts weather conditions for the next 12-24 hours based on atmospheric pressure changes.
- Icons such as sunny, partly cloudy, cloudy, or rainy will be displayed. Note that these are forecasts and may not always perfectly match current conditions.
4. Fungsi Penggera:
- Tekan butang 'ALARM' untuk view masa penggera.
- Press and hold 'ALARM' to enter alarm setting mode. Use other buttons to adjust the hour and minute, and 'ALARM' to confirm.
- To activate/deactivate the alarm, press the 'ALARM' button briefly when the alarm time is displayed. An alarm icon will appear when active.
- When the alarm sounds, press any button (except 'RESET') to activate the snooze function. The alarm will sound again after approximately 5 minutes. Press 'RESET' to turn off the alarm completely.
Penyelenggaraan
1. Penggantian Bateri:
- When the battery indicator appears on the display, replace the batteries in both the main unit and the outdoor sensor promptly.
- Always replace all batteries at the same time with new ones of the same type.
2. Pembersihan:
- Bersihkan unit dan sensor dengan kain lembut,amp kain. Jangan gunakan pembersih atau pelarut yang melelas.
- Ensure no water enters the battery compartments or other openings.
Menyelesaikan masalah
Isu dan Penyelesaian Biasa:
- No outdoor temperature display:
Penyelesaian: Check batteries in the outdoor sensor. Ensure the sensor is within range and not blocked by thick walls or interference. Try re-synchronizing by removing and reinserting batteries in both units. - Time not synchronizing (DCF-77):
Penyelesaian: Ensure the unit is placed in an area with good radio signal reception, away from electronic devices. The synchronization process can take several minutes, especially during initial setup or after battery replacement. Manual time setting is an alternative. - Bacaan suhu tidak tepat:
Penyelesaian: For outdoor sensor, ensure it is not in direct sunlight or exposed to heat sources. For indoor unit, ensure it is not near windows, heating vents, or direct sunlight. - Paparan malap atau kosong:
Penyelesaian: Gantikan bateri di unit utama.
Spesifikasi
- Nombor Model: WS9136
- Dimensi (L x W x H): 12.4 x 2.9 x 13 cm
- Berat: 158 gram
- Sumber Kuasa: Dikuasakan bateri
- Teknologi Ketersambungan: 868 MHz (for outdoor sensor)
- Bahan: plastik
- warna: Transparent/Silver
Waranti dan Sokongan
The Technoline WS 9136-IT Weather Station comes with a Waranti 2 tahun dari tarikh pembelian. Sila simpan bukti pembelian anda untuk tuntutan waranti.
For technical support or further assistance, please refer to the manufacturer's official webtapak atau hubungi bahagian perkhidmatan pelanggan mereka. Maklumat hubungan biasanya boleh didapati pada pembungkusan produk atau pengeluar webtapak.





