pengenalan
Atago 4502 PAL-102S is a handheld, portable, water-resistant cutting oil refractometer designed for precise measurement of cutting oil concentration. It features a concentration scale ranging from 0.0 to 70.0, Automatic Temperature Compensation (ATC), an LED display with External Light Interference (ELI) technology, and an IP-65 rated acrylonitrile butadiene styrene (ABS) resin body. This device is ideal for measuring the concentration of hydraulic oil, cleaning liquid, molding lubricant, and rust resistance liquid.
Ciri-ciri Utama
- Handheld pocket refractometer for measuring cutting oil 0.0 to 70.0, with a temperature range between 10.0 to 75.0 degrees C.
- Automatic Temperature Compensation (ATC) for immediate and accurate calibration readings, regardless of ambient temperature.
- LED-illuminated digital display, with an External Light Interference (ELI) feature to alert of outside light interference.
- Rectangular palm-sized shape (109 x 55 x 31mm), with prism housed in circular sample dengan baik.
- Durable, acrylonitrile butadiene styrene (ABS) resin body, with Ingress-Protection (IP)-65 rating for protection against dust and water jets.
Kandungan Pakej
Item berikut disertakan dalam pakej produk:
- Atago 4502 PAL-102S Refractometer
- Rigid plastic storage case
- Bateri AAA (2)
- Manual Arahan
Persediaan
Pemasangan Bateri
- Cari petak bateri pada peranti.
- Buka penutup petak.
- Masukkan dua (2) bateri AAA, pastikan kekutuban (+/-) betul.
- Tutup penutup petak bateri dengan selamat.
Penentukuran Awal
The unit is factory-calibrated, but can be re-calibrated with tap water for optimal accuracy.
- Ensure the prism surface is clean and dry.
- Apply a small amount (approximately 0.3ml) of clean tap water to the prism surface.
- Tekan ke SIFAR button. The display will show '0.0' indicating successful calibration.
- Wipe the tap water from the prism surface.
Arahan Operasi
Mengambil Pengukuran
- Ensure the prism surface is clean and dry.
- Apply a small amount (approximately 0.3ml) of the cutting oil sample onto the prism surface. The sloped shape of the sample well helps prevent spills.
- Wait briefly for the sample temperature to conform to the prism temperature.
- Tekan ke MULAKAN butang.
- The measurement result (cutting oil concentration) and temperature will be displayed within three seconds.
Memahami Bacaan
The primary reading on the display indicates the cutting oil concentration in the range of 0.0 to 70.0. The unit also displays the sample temperature in degrees Celsius.
If the External Light Interference (ELI) feature detects too much ambient light (e.g., direct sunlight), an alert may appear. Move to a less brightly lit area for accurate measurement.
Penyelenggaraan
Pembersihan
- After each use, clean the sample well and prism surface thoroughly with a soft, damp kain.
- Do not use abrasive cleaners or solvents, as these can damage the prism or body.
- Pastikan peranti kering sebelum disimpan.
Penyimpanan
- Store the refractometer in its rigid plastic storage case with the foam cut-out insert to protect it from impacts.
- Simpan peranti di tempat yang sejuk dan kering, jauh dari cahaya matahari langsung dan suhu yang melampau.
- Tanggalkan bateri jika peranti tidak akan digunakan untuk tempoh yang lama untuk mengelakkan kebocoran.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Bacaan Tidak Tepat | Prism not clean; improper calibration; sample not settled; too much ambient light (ELI alert). | Clean prism thoroughly; recalibrate with tap water; allow sample to reach prism temperature; move to a shaded area. |
| Paparan Tidak Berfungsi | Bateri rendah atau mati; pemasangan bateri yang salah. | Gantikan bateri; periksa kekutuban bateri. |
| No Reading After START | Tidak mencukupi sample volume; air bubbles in sample. | Ensure 0.3ml sample is applied; gently remove air bubbles. |
Spesifikasi
| Spesifikasi | Nilai |
|---|---|
| Measurement Scale Range (Cutting Oil) | 0.0 hingga 70.0 |
| Specimen Measurement Temperature Range | 10.0 hingga 75.0 darjah C |
| Accuracy (Cutting Oil) | +/- 0.2 |
| Ketepatan (Suhu) | +/- 1 degree C |
| Resolution (Cutting Oil) | 0.1 |
| Resolusi (Suhu) | 0.1 darjah C |
| Ambient Temperature for Unit Operation | 10 hingga 40 darjah C |
| Sample Volume | 0.3ml |
| Masa Pengukuran | Three seconds |
| Jenis Badan | ABS resin, IP-65 rated |
| Bekalan Kuasa | Dua bateri AAA |
| Dimensi (H x W x D) | 109 x 55 x 31mm |
| Berat badan | 100g |
Waranti dan Sokongan
Atago PAL-102S refractometer comes with a Waranti Dua Tahun Terhad dari tarikh pembelian. Waranti ini melindungi kecacatan pada bahan dan mutu kerja di bawah penggunaan biasa.
For warranty claims, technical support, or service inquiries, please contact Atago Co., Ltd. customer support. Refer to the official Atago weblaman web atau pembungkusan produk untuk maklumat hubungan terkini.
