Atago 3405 PR-32α Palette Series Portable Digital Refractometer

pengenalan

Atago 3405 PR-32α Palette is a portable digital refractometer designed for precise measurement of low Brix concentrations (0.0 to 32.0%) in various liquid samples. This device is ideal for applications in food and beverage, chemical, and industrial sectors, providing accurate results with automatic temperature compensation (ATC) and external light interference (ELI) technology.

This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your Atago PR-32α refractometer to ensure optimal performance and longevity.

Apa yang ada dalam Kotak?

• 3405 PR-32α refractometer
• Bateri 9V
• Kes pembawa
• Arahan (manual ini)

Image: The Atago 3405 PR-32α digital refractometer is shown alongside its black carrying case. The refractometer is black with a yellow display area and gray buttons. The carrying case is a rectangular black box with "Palette DIGITAL REFRACTOMETER" and "ATAGO www.atago.net" printed on its lid.

Persediaan

1. Pemasangan Bateri

1. Locate the battery compartment on the back of the refractometer.
2. Buka penutup petak bateri.
3. Insert the included 9V battery, ensuring correct polarity (+/-).
4. Tutup penutup petak bateri dengan selamat.

2. Initial Calibration (Zero Setting)

For accurate measurements, the refractometer must be calibrated with distilled water before first use and periodically thereafter.

1. Ensure the refractometer is clean and dry.
2. Place a few drops of distilled water onto the sample well (prism surface). Ensure the prism surface is completely covered.
3. Tekan ke MEMULAKAN butang untuk menghidupkan peranti.
4. Tekan ke SIFAR button (refer to device buttons for exact labeling if different from generic). The display should show "0.0%" or similar, indicating successful calibration.
5. Wipe the distilled water from the sample well using a soft, lint-free cloth.

Note: Calibration should be performed at an ambient temperature between 5 to 40 degrees C.

Arahan Operasi

1. Mengambil Pengukuran

1. Pastikan sample well is clean and dry.
2. Place one to two drops of the liquid sample ke sample well (prism surface). Ensure the prism is fully covered without air bubbles.
3. Close the daylight plate (if applicable) gently over the sample.
4. Tekan ke MEMULAKAN butang untuk memulakan pengukuran.
5. The % Brix reading will be displayed on the LED screen within approximately three seconds. The device automatically compensates for temperature variations within its operating range (5 to 40 degrees C).
6. Catat ukuran jika perlu.
7. After measurement, clean the sample well thoroughly with distilled water and a soft cloth.

2. Using the User-Scale Function

The PR-32α features a user-scale function, allowing you to input a coefficient to convert the Brix reading into a specific concentration unit relevant to your sample (e.g., concentration = Brix X coefficient).

• Refer to the detailed instructions in the full user manual (if provided separately) or Atago's official website for specific steps on programming and utilizing the user-scale function.
• This function is particularly useful for specific industrial or chemical applications where a direct Brix reading needs conversion to a custom unit.

3. External Light Interference (ELI) Technology

The refractometer incorporates ELI technology, which minimizes interference from strong external light sources (e.g., direct sunlight, bright windows). This ensures accurate measurements even when operating outdoors or near bright light sources.

Penyelenggaraan

1. Cleaning the Sample Nah

• Sentiasa bersihkan sample well (stainless steel 316 prism surface) immediately after each use.
• Use distilled water and a soft, lint-free cloth or tissue to gently wipe away any sampsisa.
• Do not use abrasive materials or harsh chemicals, as they can damage the prism surface.
• Pastikan sample well is completely dry before storing the device or taking a new measurement.

2. Penjagaan dan Penyimpanan Am

• The device has an Ingress Protection (IP)-65 rating, offering protection against dust and splashing water. However, avoid submerging the unit in water or exposing it to excessive moisture.
• Store the refractometer in its carrying case when not in use to protect it from dust, dirt, and physical damage.
• Simpan di tempat yang sejuk dan kering, jauh dari cahaya matahari langsung dan suhu yang melampau.
• If the device will not be used for an extended period, remove the 9V battery to prevent leakage.

Menyelesaikan masalah

Spesifikasi

Waranti dan Sokongan

Atago Co., Ltd. products are manufactured to high quality standards. For specific warranty information regarding your PR-32α refractometer, please refer to the warranty card included with your product or visit the official Atago webtapak.

For technical support, service, or inquiries, please contact Atago customer service or visit their official webtapak:

www.atago.net