Remington HC822

Remington 25 Piece Clipper Kit with Titanium Coated Blades

Model HC822 - Instruction Manual

pengenalan

This manual provides detailed instructions for the safe and effective use of your Remington 25 Piece Clipper Kit, Model HC822. Please read all instructions carefully before operation and retain this manual for future reference.

Remington 25 Piece Clipper Kit with Titanium Coated Blades

Figure 1: Remington 25 Piece Clipper Kit, Model HC822.

Maklumat Keselamatan

Please use this product carefully and follow all instructions for maximum safety. Always ensure the appliance is switched off before cleaning or maintenance. Keep out of reach of children. Do not immerse the unit in water. Avoid using near water or in damp environments. If the cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.

Kandungan Pakej

Your Remington 25 Piece Clipper Kit includes the following items:

Close-up of Remington Clipper Titanium Coated Blades

Rajah 2: Jarak dekat view of the titanium coated blades.

Persediaan

  1. Membongkar: Carefully remove all components from the packaging. Inspect the clipper and accessories for any signs of damage.
  2. Initial Blade Preparation: Before first use, apply a few drops of the supplied blade oil to the blades. Turn the clipper on for a few seconds to distribute the oil, then wipe off any excess.
  3. Memasang Sisir Panduan: Select the desired guide comb for your preferred hair length. Align the comb with the clipper blades and push it firmly until it clicks into place. Ensure it is securely attached before use.

Arahan Operasi

  1. Menghidupkan/Mematikan: Plug the clipper into a suitable power outlet. Use the power switch located on the unit to turn the clipper on or off.
  2. Memilih Panjang Rambut: Choose the appropriate guide comb based on the desired hair length. The kit includes various sizes to achieve different cutting lengths.
  3. Hair Cutting Technique: For best results, cut against the direction of hair growth. Move the clipper slowly and steadily through the hair. For blending, use progressively shorter guide combs.
  4. Tuas Tirus: The clipper features a taper lever (Figure 3) which allows for fine adjustment of cutting length without changing guide combs. Move the lever up for a closer cut and down for a longer cut.
Remington Clipper with Taper Lever Adjustment

Rajah 3: Sisi view of the clipper showing the taper lever for fine length adjustments.

Penyelenggaraan

  1. Bilah Pembersihan: After each use, turn off and unplug the clipper. Remove any attached guide combs. Use the cleaning brush to remove loose hairs from the blades. For thorough cleaning, the blades can be removed by unscrewing them (refer to product diagram if available).
  2. Bilah Pelincir: Regularly apply a few drops of the supplied blade oil to the blades to ensure smooth operation and prolong blade life. Do not use hair oil, grease, or any solvent.
  3. Penjajaran Bilah: If the clipper becomes noisy or vibrates excessively, check the blade alignment. Some models feature an adjustment screw on the side to fine-tune the blade's position and reduce noise. Refer to the detailed instructions in the original packaging for specific adjustment procedures.
  4. Storan: Store the clipper and all accessories in the provided storage case in a dry, cool place.

Menyelesaikan masalah

Spesifikasi

CiriPerincian
Nombor ModelHC822
JenamaRemington
Dimensi Produk7 x 3 x 4 inci
Berat Barang2 paun
Sumber KuasaCorded
Bahan BilahStainless Steel (Titanium Coated)
Penggunaan yang DisyorkanPemangkasan
PengeluarREMINGTON

Waranti dan Sokongan

A how-to guide is included with the product for additional assistance. For warranty information or support, please refer to the documentation provided in your product packaging or contact Remington customer service directly. Manufacturer: REMINGTON.

Tiada video produk rasmi daripada penjual tersedia untuk dibenamkan pada masa ini.