pengenalan
This manual provides comprehensive instructions for the safe and efficient operation, maintenance, and troubleshooting of your GBC Inspire Thermal Laminator Machine. Please read this manual thoroughly before using the device to ensure optimal performance and longevity.
Maklumat Keselamatan
Always adhere to the following safety guidelines to prevent injury or damage to the laminator:
- Do not operate the laminator with wet hands or near water.
- Pastikan kord kuasa tidak rosak atau tersepit.
- Keep the laminator away from heat sources and direct sunlight.
- Jangan masukkan objek selain daripada kantung laminasi ke dalam mesin.
- Cabut plag laminator apabila tidak digunakan atau sebelum dibersihkan.
- This device is designed for home use and features a finger-safe design.
Kandungan Pakej
Sahkan bahawa semua item terdapat dalam pembungkusan:
- GBC Inspire Thermal Laminator Machine
- Manual Arahan (dokumen ini)
- Starter pack of laminating pouches (may vary by region)
Produk Selesaiview
The GBC Inspire Thermal Laminator is a compact and efficient device designed for protecting documents and photos. It features a sleek black design and a convenient landing tray to reduce page curl.
Image: The GBC Inspire Thermal Laminator in operation, laminating a photograph.
Key components include the power switch, ready indicator light, document entry slot, and exit tray.
Persediaan
- Unpack the Laminator: Carefully remove the laminator and all accessories from the packaging.
- penempatan: Place the laminator on a flat, stable, and heat-resistant surface. Ensure there is enough clear space behind the machine for laminated items to exit freely.
- Sambungkan Kuasa: Palamkan kord kuasa ke soket elektrik standard.
- Hidupkan kuasa: Turn on the laminator using the power switch. The ready indicator light will illuminate, typically red or amber, indicating the machine is warming up.
- Masa memanaskan badan: Allow approximately 7 minutes for the laminator to reach its optimal operating temperature. The ready indicator light will turn green when the machine is ready for use.
Image: The GBC Inspire Thermal Laminator placed on a clean, flat surface, ready for setup.
Arahan Operasi
- Sediakan Dokumen: Place the document or photo you wish to laminate inside a thermal laminating pouch. Ensure the document is centered and aligned within the pouch, leaving a small margin on all sides.
- Select Pouch Thickness: The Inspire laminator supports 3 mil pouches for letter or legal size documents and 5 mil pouches for items up to 4" x 6" photo size. No carrier is required.
- Masukkan Pouch: Once the green ready light is illuminated, carefully insert the sealed edge of the laminating pouch into the document entry slot. The laminator will automatically feed the pouch through.
- Proses Laminasi: The laminator operates at a speed of 10 inches per minute. Allow the machine to fully process the pouch. Do not pull or force the pouch through the laminator.
- Sejukkan Diri: Once the laminated item exits the machine, place it on a flat surface to cool and set. Avoid handling it excessively until it has cooled to prevent bending or warping.
Image: A user carefully placing a document into a laminating pouch before insertion into the machine.
Image: The GBC Inspire Thermal Laminator actively feeding a document through its rollers.
Penyelenggaraan
- Pembersihan: Ensure the laminator is unplugged and completely cool before cleaning. Wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Pembersihan Roller: Periodically run a cleaning sheet (available separately) through the laminator to remove any adhesive residue from the rollers.
- Storan: Store the laminator in a cool, dry place when not in use.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Laminator tidak dihidupkan. | Tiada bekalan kuasa. | Periksa sambungan kord kuasa dan salur keluar dinding. |
| Laminator not heating up (no green light). | Insufficient warm-up time. | Allow the full 7 minutes for warm-up. |
| Pouch jams. | Pouch inserted incorrectly or too thick. | Ensure pouch is inserted sealed-edge first. Use correct pouch thickness (3 mil or 5 mil). |
| Item berlamina keruh atau mempunyai gelembung. | Laminator not hot enough or incorrect pouch. | Wait for the green ready light. Ensure correct pouch type for thermal laminators. |
Spesifikasi
- model: 1701855
- Laminating Type: terma
- Masa memanaskan badan: Lebih kurang 7 minit
- Laminating Speed: 10 inci seminit
- Maximum Document Width: 9 inci
- Pouch Thickness Compatibility: 3 mil (for Letter/Legal size), 5 mil (for up to 4" x 6" photo size)
- Dimensi: 4.33 x 14.96 x 4.25 inci
- Berat: 2.61 paun
- warna: Hitam
Waranti dan Sokongan
The GBC Inspire Thermal Laminator is backed by a limited 90-day warranty. For warranty claims, technical support, or additional product information, please contact GBC customer service through their official webtapak atau peruncit tempat produk itu dibeli.
Untuk maklumat lanjut, lawati GBC Store on Amazon.
