Manual Arahan Pita Audio Kaset Biasa Maxell UR90/100 90-Minit

1. Pengenalan

The Maxell UR90/100 audiocassette tape is a normal bias, Type I tape designed for general-purpose recording. It offers 90 minutes of total recording time, divided into 45 minutes per side. This tape is suitable for both voice and music recording applications, featuring a low-noise surface for clear audio reproduction.

2. Produk Lebihview

Imej 1: Maxell UR90 90-minute normal bias audiocassette tape packaging. The image displays the red and clear plastic packaging for a single Maxell UR audiocassette. The tape inside is visible, labeled 'UR POSITION NORMAL BIAS'. The packaging prominently features 'maxell AUDIO CASSETTE', 'NORMAL BIAS UR', and '90 MINUTES/135m', along with the phrase 'GREAT FOR EVERYDAY RECORDING'.

3. Persediaan dan Persediaan

Before recording or playback, ensure your cassette deck or player is clean and in good working order. Refer to your cassette deck's manual for specific cleaning and maintenance procedures.

1. Unpack the Tape: Carefully remove the audiocassette from its packaging.
2. Initial Winding: If the tape appears loose, gently insert a pencil or a similar object into one of the hub holes and turn it clockwise until the tape is taut. This prevents tangling.
3. Insert into Deck: Open the cassette compartment of your audio device and insert the tape with the desired side (A or B) facing up, ensuring the open edge with the tape is facing towards the playback/record head. Close the compartment securely.

4. Arahan Operasi

4.1 Rakaman

1. Sediakan untuk Rakaman: Ensure the write-protect tabs on the top edge of the cassette are intact (not broken out). If a tab is broken, the tape cannot be recorded on that side.
2. Set Input Levels: Connect your audio source (microphone, line-in) to the cassette deck. Adjust the recording level controls on your deck to prevent distortion. Monitor the level meters to keep peaks within the recommended range.
3. Mulakan Rakaman: Press the 'Record' and 'Play' buttons simultaneously on your cassette deck to begin recording.
4. Hentikan Rakaman: Press the 'Stop' button to end the recording.

4.2 Main semula

1. Masukkan Pita: Insert the recorded tape into your cassette deck.
2. Mula Main Semula: Press the 'Play' button on your cassette deck.
3. Laraskan Kelantangan: Adjust the volume control on your deck or amppenguat ke tahap pendengaran yang selesa.
4. Maju Pantas/Putar Balik: Use the 'FF' (Fast Forward) and 'REW' (Rewind) buttons to navigate through the tape. Press 'Stop' before switching directions or initiating playback.

5. Penyelenggaraan dan Penyimpanan

• Penjagaan Pita: Avoid touching the magnetic tape surface directly, as oils and dirt can degrade audio quality.
• Storan: Store cassettes in their protective cases to prevent dust accumulation and physical damage.
• Keadaan Persekitaran: Keep tapes away from direct sunlight, high temperatures, high humidity, and strong magnetic fields (e.g., speakers, televisions, motors), which can erase or damage recordings.
• Penyelenggaraan Dek Kaset: Regularly clean the heads, capstan, and pinch roller of your cassette deck with a suitable cleaning solution and cotton swabs to ensure optimal performance and prevent tape damage.

6. Penyelesaian masalah

• Tape Jamming/Snagging: This can be caused by a loose tape (see Setup section) or a dirty/malfunctioning cassette deck. Ensure the tape is taut before insertion. Clean your deck's tape path.
• Poor Sound Quality (Muffled/Distorted): Check if the recording levels were set correctly. Ensure the cassette deck heads are clean. Verify the tape type selector on your deck matches 'Normal' or 'Type I'.
• Pita Tidak Merakam: Confirm that the write-protect tabs on the top edge of the cassette are intact. If a tab is broken, the tape cannot be recorded on that side.
• Tape Shedding: If you observe brown residue on your deck's components, the tape may be shedding oxide. Clean your deck thoroughly. Excessive shedding may indicate a degraded tape.

7. Spesifikasi

8. Waranti dan Sokongan

For information regarding product warranty, please refer to the terms and conditions provided by your retailer at the time of purchase or visit the official Maxell website. For technical support or further assistance, please contact Maxell customer service through their official channels.