Manual Arahan UPS CyberPower CP1000PFCLCD PFC Sinewave

1. Produk Lebihview

The CyberPower CP1000PFCLCD is a mini-tower Uninterruptible Power Supply (UPS) system designed to provide battery backup, power protection, and surge protection. It features sine wave output, making it compatible with active Power Factor Correction (PFC) and conventional power supplies. This UPS safeguards desktop computers, workstations, networking devices, and home entertainment systems.

• 1000VA/600W PFC Sine Wave Battery Backup: Designed to support active PFC and conventional power supplies, safeguarding computers, workstations, network devices, and telecom equipment.
• 10 Cawangan NEMA 5-15R: Includes five battery backup & surge protected outlets and five surge protected outlets. Input is a NEMA 5-15P right-angle, 45-degree offset plug with a five-foot power cord. Two USB charge ports (1 Type-A, 1 Type-C) are included for quick charging of mobile phones and tablets.
• Multifunction, Color LCD Panel: Displays immediate, detailed information on battery and power conditions. The color display alerts users to potential issues before they can affect critical equipment and cause downtime. The screen tilts up to 22 degrees for optimal viewing.
• Vol. Automatiktage Peraturan (AVR): Corrects minor power fluctuations without switching to battery power, thereby extending the life of the battery.

2. Arahan Persediaan

1. Buka bungkusan UPS: Keluarkan UPS dari pembungkusannya dengan berhati-hati. Periksa sebarang kerosakan penghantaran.
2. Sambungkan Bateri: The UPS is shipped with the battery disconnected. Refer to the battery compartment instructions (usually located at the bottom or side panel) to connect the internal battery.
3. Caj Permulaan: Plug the UPS into a standard 120V AC outlet. Allow the unit to charge for at least 8 hours before connecting any equipment to ensure maximum battery runtime.
4. Sambungkan Peralatan:
   • Plug critical equipment (e.g., computer, monitor, network router) into the Cawangan Sandaran Bateri & Lonjakan Dilindungi. These outlets provide power during outagdan melindungi daripada lonjakan.
   • Pasangkan peralatan yang tidak kritikal (contohnya, pencetak, pengimbas) ke dalam Outlet Dilindungi Lonjakan. These outlets only provide surge protection.
5. Connect USB Charging Devices: Use the USB-A and USB-C ports on the front panel to charge compatible mobile devices.
6. Hidupkan kuasa: Press the power button on the front panel to turn on the UPS. The LCD display will illuminate.

3. Arahan Operasi

1. Navigasi Paparan LCD: Use the 'Display', 'Mute', and 'Setup' buttons on the front panel to navigate through the LCD display. The display provides real-time information such as input/output voltage, battery capacity, estimated runtime, and load level.
2. Kuasa Outage: Semasa kuasa outage, the UPS will automatically switch to battery power. An audible alarm will sound (if not muted) and the LCD display will indicate battery mode.
3. Meredamkan Penggera: Press the 'Mute' button to silence the audible alarm during a power outage.
4. Penutupan Selamat: If a prolonged power outage occurs, safely shut down connected equipment before the UPS battery is depleted. The estimated runtime displayed on the LCD panel can help you manage this.
5. Mulakan Semula Automatik: When utility power is restored, the UPS will automatically switch back to AC power and begin recharging its battery. Connected equipment will resume normal operation.

4. Penyelenggaraan

1. Penggantian Bateri: The internal battery is user-replaceable. Refer to the manufacturer's guidelines for recommended replacement intervals (typically every 3-5 years, or when the UPS indicates a battery fault). Always use genuine CyberPower replacement batteries.
2. Pembersihan: Regularly clean the exterior of the UPS with a soft, dry cloth. Do not use liquid or aerosol cleaners. Ensure ventilation openings are free from dust and debris.
3. Storan: Jika menyimpan UPS untuk tempoh yang lama, pastikan bateri dicas sepenuhnya. Cas semula bateri setiap 3 bulan untuk mengelakkan kerosakan kekal. Simpan di tempat yang sejuk dan kering.

Battery Replacement Video

This video demonstrates the process of replacing batteries in a CyberPower UPS unit. It shows how to access the battery compartment, disconnect the old batteries, and install new ones. The video highlights the importance of careful handling of the LCD panel connection and proper terminal re-connection. It also mentions the use of ExpertPower 12V batteries as replacements.

5. Penyelesaian masalah

• UPS Tidak Dihidupkan: Ensure the power cord is securely plugged into a wall outlet and the UPS. Verify the internal battery is properly connected. Allow for initial charging if it's a new unit.
• Masa Jalan Bateri Pendek: The battery may be old and require replacement, or it may not be fully charged. Ensure the UPS has been charged for at least 8 hours. Reduce the load on the battery backup outlets.
• Penggera lebihan: If the UPS emits a continuous alarm and the LCD indicates an overload, disconnect non-essential equipment from the battery backup outlets until the alarm stops.
• Tiada Kuasa ke Soket: Check the circuit breaker on the back of the UPS. Press it to reset if it has tripped. Ensure the UPS is turned on.

6. Spesifikasi

7. Waranti dan Sokongan

The CyberPower CP1000PFCLCD comes with a Waranti 3 Tahun, which includes the battery. Additionally, it is backed by a Jaminan Peralatan Terhubung $350,000 and includes FREE PowerPanel Personal Edition Management Software (available for download).

For technical support, troubleshooting assistance, or warranty claims, please visit the official CyberPower website or contact their customer service department. Keep your purchase receipt and product serial number handy for faster service.

8. Visual Produk

Penerangan Imej: A depan view of the CyberPower CP1000PFCLCD UPS. The unit is black with a prominent LCD display showing input voltage and battery status. USB-A and USB-C charging ports are visible below the display. The CyberPower logo and '1000VA' are printed at the bottom.

Penerangan Imej: A terperinci view of the back panel of the CyberPower CP1000PFCLCD UPS. It features five battery backup and surge-protected outlets on the left, and five surge-protected outlets on the right. Various communication ports including Network (In/Out), USB, and Serial are visible at the top, along with a circuit breaker button.

Penerangan Imej: This image presents both the front and back views of the CyberPower CP1000PFCLCD UPS side-by-side. The front shows the LCD display and USB ports, while the back highlights the arrangement of the 10 NEMA 5-15R outlets and various data ports, emphasizing the compact mini-tower design.

Penerangan Imej: An image illustrating the physical dimensions of the CyberPower CP1000PFCLCD UPS. Key measurements for height (9.70 inches), width (3.90 inches), and depth (10.20 inches) are clearly indicated, showcasing its mini-tower form factor.

Penerangan Imej: The CyberPower CP1000PFCLCD UPS is shown discreetly placed within a modern home entertainment setup, next to a gaming console and television. The image demonstrates how the compact mini-tower design allows it to blend into various environments while providing power protection.

Penerangan Imej: A graphic titled "PROFESSIONAL POWER PROTECTION PFC SINEWAVE UPS SYSTEMS". It lists various power issues the system protects against, including Blackouts, Sags, Spikes, Under Voltages, and Over Voltages, with a background image of a person working at a computer.

9. Video Produk Rasmi