Cisco SG300-28P 28-Port Gigabit PoE Managed Switch User Manual

1. Pengenalan

This manual provides essential instructions for the installation, configuration, and operation of the Cisco SG300-28P 28-Port Gigabit PoE Managed Switch. This device is designed to offer a reliable and secure network foundation for small businesses, supporting critical applications and optimizing network performance.

The Cisco SG300-28P is part of the Cisco 300 Series, offering advanced features to enhance network availability, security, and bandwidth optimization. It is engineered for ease of setup and use in small business environments.

2. Produk Lebihview

The Cisco SG300-28P is a 28-port Gigabit Power over Ethernet (PoE) managed switch. It features 24 Gigabit Ethernet ports with PoE capability and 4 additional Gigabit Ethernet ports, which are combo ports supporting either RJ45 or SFP connections. The switch is housed in a durable metal casing, suitable for desktop or rack-mount installations.

Figure 1: Cisco SG300-28P Front Panel
This image displays the front panel of the Cisco SG300-28P switch. It features 24 standard Gigabit Ethernet ports, labeled 1A through 24V, and 2 additional combo Gigabit SFP ports (G25A, G26V, G27A, G28miniGBIC) for fiber optic connections. On the left, there are System and Reset indicators. The Cisco logo and model number SG 300-28P are also visible.

2.1 Komponen Panel Hadapan

• LED sistem: Indicates the operational status of the switch.
• Butang Tetapkan Semula: Digunakan untuk menetapkan semula suis kepada tetapan lalai kilang.
• 24 x 10/100/1000 Gigabit Ethernet Ports (PoE): RJ45 ports supporting Power over Ethernet for connecting network devices. Each port has Link/Act and PoE status LEDs.
• 4 x Combo Gigabit Ports (RJ45/SFP): These ports can function as either standard RJ45 Gigabit Ethernet ports or accept SFP transceivers for fiber optic connections.

2.2 Kandungan Pakej

Sahkan bahawa pakej anda mengandungi item berikut:

• Cisco SG300-28P 28-Port Gigabit PoE Managed Switch
• Kabel kuasa
• Kit pemasangan rak (jika berkenaan)
• Documentation CD (or link to online documentation)

3. Persediaan

3.1 Pemasangan Fizikal

Suis ini boleh dipasang pada desktop atau dipasang pada rak peralatan standard 19 inci.

• Pemasangan Desktop: Place the switch on a flat, stable surface. Ensure adequate ventilation around the unit.
• Pemasangan Rak: Use the provided rack-mount kit to secure the switch in a standard equipment rack. Follow the instructions included with the kit for proper mounting.

3.2 Kuasa Penyambung

1. Connect the included power cable to the power input on the rear panel of the switch.
2. Palamkan hujung kabel kuasa yang lain ke dalam salur keluar elektrik yang dibumikan.
3. The System LED on the front panel will illuminate when power is supplied.

3.3 Sambungan Rangkaian

1. Connect network devices (e.g., computers, servers, IP phones, wireless access points) to the RJ45 Gigabit Ethernet ports using standard Ethernet cables.
2. For fiber optic connections, insert compatible SFP transceivers into the combo SFP ports and connect fiber optic cables.
3. The Link/Act LED for each connected port will illuminate when a valid link is established and blink to indicate activity.
4. For PoE-powered devices, the PoE LED will illuminate when power is being supplied.

3.4 Akses Konfigurasi Awal

Suis boleh dikonfigurasikan melalui web-based interface or a Command Line Interface (CLI).

• Web-Antarmuka Berasaskan: Connect a computer to any port on the switch. The switch will typically obtain an IP address via DHCP or use a default IP address. Refer to the product documentation for the default IP address and login credentials. Open a web browser and enter the switch's IP address to access the management interface.
• Antara Muka Baris Perintah (CLI): For advanced users, the switch supports CLI access via a console port (if available) or SSH/Telnet after initial network configuration.

Tools like Cisco Discovery Protocol and Cisco FindIT Network Discovery Utility can assist in discovering the switch on your network and launching the web antara muka.

4. Mengendalikan Suis

4.1 Kesambungan Rangkaian Asas

Once connected and powered on, the switch will forward traffic between connected devices. For basic plug-and-play operation, no further configuration may be immediately required.

4.2 Power over Ethernet (PoE)

The SG300-28P provides Power over Ethernet on its 24 Gigabit Ethernet ports, allowing compatible devices such as IP phones, wireless access points, and IP cameras to receive power directly through the Ethernet cable. This eliminates the need for separate power adapters for these devices.

4.3 Managed Features

The switch offers a range of managed features accessible through its web-based interface or CLI:

• Virtual LANs (VLANs): Segment your network into separate broadcast domains for improved security and performance.
• Kualiti Perkhidmatan (QoS): Prioritize network traffic for critical applications like voice (IP telephony) and video to ensure consistent performance. The switch supports automatic voice VLAN and QoS configuration for connected endpoints.
• Ciri-ciri Keselamatan: Implement Access Control Lists (ACLs) to control network access, and configure guest VLANs for secure visitor access.
• Penghalaan Statik: Configure static routes for inter-VLAN routing or connecting to other networks.
• Sokongan IPv6: The switch supports the latest generation of networking protocols.

5. Penyelenggaraan

5.1 Kemas Kini Perisian Tegar

Periksa sokongan Cisco secara berkala website for firmware updates. Keeping the switch firmware current ensures optimal performance, security, and access to new features. Follow the instructions provided with the firmware update package for the upgrade process.

5.2 Pembersihan

To maintain proper ventilation and prevent overheating, ensure the switch's vents are clear of dust and debris. Use a soft, dry cloth to clean the exterior of the unit. Do not use liquid or aerosol cleaners.

5.3 Pertimbangan Alam Sekitar

Operate the switch within its specified environmental ranges for temperature and humidity to ensure long-term reliability. Avoid placing the switch in direct sunlight or near heat sources.

6. Penyelesaian masalah

6.1 Tiada Kuasa

• Verify the power cable is securely connected to both the switch and a working electrical outlet.
• Check the power source (e.g., wall outlet, power strip) for functionality.
• Ensure the System LED is illuminated.

6.2 Tiada Pautan pada Port

• Pastikan kabel Ethernet disambungkan dengan betul di kedua-dua hujungnya.
• Sahkan peranti yang disambungkan dihidupkan dan berfungsi dengan betul.
• Try a different Ethernet cable or port.
• Check the Link/Act LED for the specific port.

6.3 Network Performance Issues

• Periksa trafik atau gelung rangkaian yang berlebihan.
• Review Tetapan QoS untuk memastikan trafik kritikal diutamakan.
• Verify duplex and speed settings on connected devices and switch ports.

6.4 Menetapkan Semula Suis

To restore the switch to its factory default settings, press and hold the Reset button on the front panel for approximately 10-15 seconds until the System LED changes its state. This action will erase all custom configurations.

7. Spesifikasi

8. Waranti dan Sokongan

8.1 Maklumat Waranti

The Cisco SG300-28P switch is backed by a limited lifetime warranty. Please refer to the official Cisco warranty documentation for specific terms and conditions.

8.2 Sokongan Teknikal

For technical assistance, product updates, and additional resources, please contact the Cisco Small Business Support Center or visit the official Cisco webtapak:

• Sokongan Cisco Webtapak: https://www.cisco.com/go/smallbusinesssupport