Manual Pengguna Pemadat Plat Petrol Zipper RPE60

1. Pengenalan

This user manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Zipper RPE60 Petrol Plate Compactor. Please read this manual thoroughly before operating the machine to ensure proper use and to prevent injury or damage.

The Zipper RPE60 is a robust petrol-powered vibrating plate designed for compacting various granular materials such as sand, gravel, and asphalt. Its compact design and powerful engine make it suitable for a range of construction and landscaping tasks.

2. Arahan Keselamatan

Always prioritize safety when operating the plate compactor. Failure to follow these instructions can result in serious injury or death.

2.1 Keselamatan Am

• Baca dan fahami keseluruhan manual sebelum pengendalian.
• Wear appropriate Personal Protective Equipment (PPE), including safety glasses, hearing protection, sturdy footwear, and gloves.
• Do not operate the machine under the influence of alcohol, drugs, or medication that may impair judgment.
• Jauhkan kanak-kanak dan orang ramai dari kawasan operasi.
• Ensure the work area is well-lit and free of obstacles.

2.2 Keselamatan Bahan Api

• Isi minyak di kawasan pengudaraan yang baik dengan enjin dimatikan dan sejuk.
• Do not smoke or allow open flames near the fuel tank.
• Lap sebarang bahan api yang tertumpah dengan segera.
• Store fuel in approved containers away from heat sources.

2.3 Keselamatan Operasi

• Operate the compactor on stable ground.
• Be aware of exhaust fumes; operate only in well-ventilated areas.
• Do not operate on slopes that are too steep, as the machine may tip.
• Jangan sekali-kali meninggalkan mesin tanpa pengawasan semasa berjalan.

3. Komponen dan Kawalan

Familiarize yourself with the key components of the Zipper RPE60 Plate Compactor.

Rajah 3.1: Depan view of the Zipper RPE60 Petrol Plate Compactor, showing the engine, fuel tank, and compaction plate.

Rajah 3.2: sebelah view of the Zipper RPE60, highlighting the handle assembly and transport wheels.

Rajah 3.3: jarak dekat view of the engine on the Zipper RPE60, showing the air filter and recoil starter.

Komponen Utama:

• Enjin: Petrol-powered engine providing the necessary power for compaction.
• Tangki Bahan Api: Located on top of the engine, for petrol storage. Capacity: 3.6 litres.
• Compaction Plate: The heavy base plate that vibrates to compact the material. Dimensions: 35 cm (width) x 51 cm (depth).
• Perhimpunan pemegang: For guiding and controlling the compactor.
• Kawalan Pendikit: Adjusts engine speed and vibration intensity.
• Pemula Recoil: Untuk menghidupkan enjin secara manual.
• Roda Pengangkutan: For easier movement of the machine when not in operation.

4. Pemeriksaan Persediaan dan Pra-Operasi

Before starting the compactor, perform the following checks to ensure safe and efficient operation.

4.1 Assembly (if required)

The Zipper RPE60 typically comes partially assembled. Attach the handle assembly securely using the provided hardware. Ensure all bolts are tightened to the manufacturer's specifications.

4.2 Mengisi bahan api

1. Pastikan enjin dimatikan dan sejuk.
2. Buka penutup tangki bahan api.
3. Fill the tank with fresh, unleaded petrol (minimum 95 RON). Do not overfill.
4. Tutup penutup tangki bahan api dengan kemas.

4.3 Engine Oil Check

1. Place the compactor on a level surface.
2. Locate the oil dipstick/fill cap.
3. Remove, wipe clean, reinsert (without screwing in), and remove again to check the oil level.
4. Add recommended engine oil (e.g., SAE 10W-30) if the level is low, ensuring it reaches the full mark.
5. Securely replace the dipstick/fill cap.

4.4 Pemeriksaan Am

• Inspect the air filter for cleanliness. Clean or replace if necessary.
• Check all nuts, bolts, and fasteners for tightness.
• Ensure the compaction plate is clean and free of debris.
• Verify that the throttle control operates smoothly.

5. Arahan Operasi

Follow these steps for safe and effective operation of your plate compactor.

5.1 Menghidupkan Enjin

1. Ensure the fuel valve is open (ON position).
2. Move the choke lever to the "CHOKE" position (for cold starts).
3. Move the throttle lever slightly to the "FAST" position.
4. Tarik pemegang penghidup sentakan dengan kuat dan lancar sehingga enjin dihidupkan. Jangan biarkan talinya patah ke belakang.
5. Setelah enjin dihidupkan, gerakkan tuil pencekik secara beransur-ansur ke kedudukan "RUN".
6. Allow the engine to warm up for a few minutes before engaging compaction.

5.2 Compaction Procedure

Rajah 5.1: An operator guiding the Zipper RPE60 Plate Compactor over a gravel surface, demonstrating typical use.

Rajah 5.2: Satu lagi view of the Zipper RPE60 in operation, showing the operator's stance and control of the handle.

• Set the engine speed to the desired level using the throttle. Higher speeds generally result in greater compaction force.
• Guide the compactor slowly and steadily over the material to be compacted.
• Overlap each pass by approximately one-third of the plate width to ensure uniform compaction.
• For optimal compaction, make multiple passes over the same area, gradually increasing the number of passes until the desired density is achieved.
• The recommended compaction depth is up to 150 cm, with a movement speed of 13.8 meters per minute.
• For cohesive soils, it may be beneficial to lightly moisten the surface before compaction.

5.3 Menghentikan Enjin

1. Kurangkan kelajuan enjin kepada melahu.
2. Gerakkan suis enjin ke kedudukan "OFF".
3. Close the fuel valve (OFF position) to prevent fuel leakage.

6. Penyelenggaraan

Regular maintenance is crucial for the longevity and optimal performance of your Zipper RPE60.

6.1 Penyelenggaraan Harian

• Clean the compactor thoroughly after each use, removing dirt and debris from the plate and engine area.
• Periksa paras minyak enjin.
• Periksa penapis udara untuk kotoran yang berlebihan.
• Periksa pengikat yang longgar dan ketatkan mengikut keperluan.
• Inspect the V-belt for wear or damage.

6.2 Penyelenggaraan Berkala

• Every 25 hours or monthly: Clean/replace air filter. Check spark plug; clean or replace if fouled.
• Every 50 hours or 3 months: Change engine oil. Inspect fuel filter.
• Every 100 hours or 6 months: Inspect valve clearance (professional service recommended). Clean fuel tank.
• Setiap tahun: Full service by a qualified technician.

6.3 Penyimpanan

For long-term storage, drain the fuel tank and carburetor. Remove the spark plug and add a small amount of engine oil into the cylinder, then pull the recoil starter a few times to distribute the oil. Store the compactor in a clean, dry place.

7. Penyelesaian masalah

Bahagian ini menyediakan penyelesaian kepada isu operasi biasa. Untuk masalah yang tidak disenaraikan di sini, hubungi kakitangan servis yang berkelayakan.

8. Spesifikasi Teknikal

9. Maklumat Waranti

Zipper products are manufactured to high quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Zipper webtapak. Simpan bukti pembelian anda untuk sebarang tuntutan waranti.

10. Sokongan Pelanggan

If you require technical assistance, spare parts, or have questions regarding your Zipper RPE60 Plate Compactor, please contact your authorized Zipper dealer or the customer service department. Refer to the contact information provided with your purchase documentation or on the official Zipper webtapak.

For general inquiries, you may also refer to the seller "Scheppach Direct UK" if purchased via Amazon, as indicated in the product listing.