1. Pengenalan
This manual provides detailed instructions for the installation, operation, and maintenance of your hansgrohe Talis C High Arc Kitchen Faucet. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your product. This faucet is designed for kitchen use, featuring a pull-down sprayer and a durable Stainless Steel Optic finish.
Image 1.1: hansgrohe Talis C High Arc Kitchen Faucet, Stainless Steel Optic.
Video 1.1: Official hansgrohe Talis C Kitchen Faucet overview, demonstrating features and design. (Duration: 1:00)
2. Ciri-ciri Utama
- Reka Bentuk Elegan: Sweeping forms meet traditional style, characteristic of Talis C faucets.
- Stainless Steel Optic Finish: High-quality surface, resistant to scratches due to PVD technology.
- Muncung Pusing 150°: Provides enhanced freedom of movement and access to the kitchen sink.
- Pull-Out Sprayer: Extends reach for targeted rinsing of fruits, vegetables, and larger pots.
- Dual Spray Types: Easily switch between a smooth aerated spray for filling and a soft shower jet for gentle cleaning via a flat switch button on the spout.
- Magnetic Docking (MagFit): Ensures the pull-out spray head is securely held in the center of the spout.
- Flexible 3/8-inch Hoses: Designed for quick connection to standard angle valves.
- Mematuhi ADA: Meets the standards for accessibility.
Image 2.1: The Talis C faucet integrated into a kitchen environment, showcasing its high arc design.
3. Persediaan dan Pemasangan
hansgrohe recommends that a licensed plumber install this product to ensure proper function and adherence to local plumbing codes. The faucet is designed for deck mounting with a single hole. Connection hoses are included for standard 3/8-inch angle valves.
3.1. Pemeriksaan Pra-Pemasangan
- Pastikan semua komponen ada seperti dalam senarai pembungkusan.
- Ensure water supply lines are shut off before beginning installation.
- Clear the installation area and ensure adequate space for working.
3.2. Dimensi
Refer to the diagram below for precise product dimensions to ensure compatibility with your sink and countertop setup.
Image 3.1: Technical drawing showing the dimensions of the Talis C faucet, including height, reach, and mounting specifications.
4. Arahan Operasi
4.1. Pengaliran Air dan Kawalan Suhu
The single lever handle controls both water flow and temperature. Lift the handle to increase water flow. Push the handle forward for cold water and pull it back for hot water. The handle's movement range allows for precise temperature adjustment.
4.2. Fungsi Penyembur Tarik Bawah
Gently pull the spray head down from the spout to extend the hose. The magnetic docking system (MagFit) ensures the spray head retracts smoothly and securely back into place when released.
Image 4.1: Demonstrates a hand pulling the spray head from the main faucet body.
4.3. Switching Spray Modes
The spray head features two distinct spray modes: an aerated stream and a shower spray. To switch between these modes, press the flat button located on the spray head. The smooth aerated spray is ideal for filling pots, while the soft shower jet is suitable for rinsing delicate items like fruits and vegetables.
Image 4.2: Illustrates the difference between the full aerated spray and the needle (shower) spray patterns.
Image 4.3: A hand pressing the button on the spray head to change the water flow pattern.
5. Penyelenggaraan dan Penjagaan
Regular cleaning and maintenance will help preserve the finish and functionality of your hansgrohe faucet.
5.1. Cleaning the Faucet Surface
- Use only mild soap and water with a soft cloth.
- Avoid abrasive cleaners, scouring pads, or harsh chemicals, as these can damage the Stainless Steel Optic finish.
- Bilas dengan air bersih dan keringkan dengan kain lembut untuk mengelakkan bintik air.
5.2. Cleaning the Spray Head Screen
Over time, mineral deposits or debris can accumulate in the spray head screen, affecting water flow. To clean the screen:
- Unscrew the spray head from the pull-down hose.
- Carefully remove the small screen or aerator from inside the spray head.
- Rinse the screen under running water to remove any debris. For stubborn deposits, soak in a vinegar solution.
- Reinsert the clean screen and screw the spray head back onto the hose, ensuring a tight seal to prevent leaks.
6. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Aliran air rendah | Clogged spray head screen/aerator; partially closed shut-off valve. | Clean the spray head screen as described in Section 5.2. Ensure shut-off valves under the sink are fully open. |
| Leaking at spray head connection | Loose connection; damaged O-ring. | Tighten the spray head connection. Inspect and replace O-rings if damaged. |
| Suhu air tidak konsisten | Pelarasan bekalan panas/sejuk yang tidak betul; masalah dengan pemanas air. | Verify hot and cold water supply lines are correctly connected and fully open. Check water heater settings. |
| Kepala semburan tidak ditarik balik sepenuhnya | Obstruction under the sink; weight not properly positioned. | Check for any items obstructing the hose movement. Ensure the counterweight on the hose is correctly installed and positioned. |
7. Spesifikasi
| Ciri | Perincian |
|---|---|
| Jenama | hansgrohe |
| Nama Model | Talis C High Arc Single Hole |
| Nombor Model | 04215800 |
| warna | Optik Keluli Tahan Karat |
| bahan | Tembaga |
| Jenis Selesai | Optik Keluli |
| Jenis Pemasangan | Gunung Dek |
| Bilangan Pemegang | 1 |
| Kiraan Lubang | 1 |
| Ciri Khas | Penyembur Tarik Ke Bawah |
| Kadar Aliran Maksimum | 1.75 Gelen Setiap Minit |
| Ketinggian spout | 9.37 Inci |
| Berat Barang | 6.49 paun |
| Dimensi Produk | 8"D x 2"W x 15"H |
| Pensijilan | Rasa Air |
7.1. ADA Compliance
Image 7.1: The hansgrohe Talis C Faucet is designed to meet ADA compliance standards for accessibility.
8. Maklumat Waranti
Hansgrohe, Inc. warrants to the original consumer purchaser that hansgrohe products will be free from defects in material and workmanship for as long as the original consumer purchaser owns both the product and the home in which the product was originally installed. For commercial purchasers, the warranty period is (a) one (1) year for hansgrohe products from the date of purchase. The warranty period for products in the Rubbed Bronze, Matte Black, Matte White finishes is three (3) years from the date of purchase. This warranty is non-transferable. Because Hansgrohe, Inc. is unable to control the quality of hansgrohe products sold by unauthorized sellers, unless otherwise prohibited by law, this warranty does not cover hansgrohe products purchased from unauthorized sellers. Authorized sellers can be found on hansgrohe branded webtapak. Sekatan jaminan tambahan dikenakan. Lihat pengilang webtapak untuk butiran jaminan penuh.
9. Sokongan Pelanggan
Untuk bantuan lanjut, sokongan teknikal atau untuk bertanya tentang alat ganti, sila layari laman web rasmi hansgrohe. weblaman web atau hubungi jabatan khidmat pelanggan mereka. Apabila menghubungi sokongan, sila sediakan nombor model produk anda (04215800) dan maklumat pembelian.
Anda juga boleh melawat Kedai hansgrohe di Amazon untuk maklumat lanjut dan produk.