1. Pengenalan
This manual provides comprehensive instructions for the operation and maintenance of the Aputure Timer Camera Remote Control Shutter Cable 1N. Please read this manual thoroughly before using the device to ensure proper function and longevity.
2. Ciri-ciri Produk
- Premium Grade Shutter Cable Release with Timer and Intervalometer functions.
- Auto-focusing capability via half-press of the shutter button.
- Adjustable delay time for the first shot: 1 second to 100 hours.
- Configurable shooting interval: 1 second to 100 hours.
- Programmable shutter count: 1 to 399 shots, or infinite.
- Illuminated LCD display for low-light conditions.
- Powered by two AAA batteries (included), offering approximately 1,400 hours of use.
- Equipped with a 14-inch cord for remote operation.
- Compact dimensions: 15.4cm (L) x 4cm (W) x 1.8 cm (D) (cord excluded).
- Compatible with various Nikon and Fujifilm camera models, including Nikon D800E, D800, D700, D300S, D300, D200, D4, D3X, D3, Fujifilm S5 Pro, and S3 Pro.
3. Kandungan Pakej
Sahkan bahawa semua item terdapat dalam pakej:
- Aputure Timer Camera Remote Control Shutter Cable 1N
- 2 x Bateri AAA
- Manual Pengguna (dokumen ini)
4. Produk Lebihview
Figure 1: Aputure Timer Camera Remote Control Shutter Cable 1N. The image shows the black remote control with its attached cable and connector. The remote features an LCD screen, control buttons (SET, directional arrows, TIMER START/STOP, HOLD, and a backlight/lock button), and a textured grip area.
4.1. Kawalan dan Paparan
- Paparan LCD: Shows current settings for Delay, Long Exposure, Interval, and Number of Shots.
- Butang SET: Enters and confirms settings.
- Butang Arah (Atas/Bawah/Kiri/Kanan): Navigasi menu dan laraskan nilai.
- TIMER START/STOP Button: Initiates or halts the timer sequence.
- Shutter Release Button (HOLD): Functions as a manual shutter release. Half-press for autofocus, full-press for shutter release. Slide up to lock for continuous shooting or bulb mode.
- Backlight / Lock Button: Activates the LCD backlight. Press and hold to lock the remote's buttons.
5. Persediaan
5.1. Pemasangan Bateri
- Cari petak bateri di belakang alat kawalan jauh.
- Geser buka penutup petak bateri.
- Masukkan dua bateri AAA, pastikan kekutuban (+/-) betul seperti yang ditunjukkan di dalam petak.
- Tutup penutup petak bateri dengan selamat.
Nota: The remote can function as a basic shutter release cable without batteries, but timer functions require battery power. There is no dedicated ON/OFF switch; remove batteries to fully power off the device for extended storage.
5.2. Menyambung ke Kamera
- Pastikan kamera anda dimatikan.
- Locate the remote control terminal on your camera. This is typically a multi-pin port.
- Align the connector of the Aputure remote cable with the camera's terminal.
- Gently insert the connector until it clicks into place. Do not force the connection.
- Hidupkan kamera anda.
Nota Keserasian: This model is designed for Nikon cameras with a 10-pin remote terminal (e.g., D1, D2, D3, D4, D100, D200, D300, D300s, D700, D800, D800E, D3X, D3S) and Fujifilm S3 Pro, S5 Pro. Ensure your camera has the correct port type.
6. Arahan Operasi
6.1. Pelepasan Pengatup Asas
- Separuh Tekan: Press the large circular shutter release button halfway down to activate camera autofocus.
- Tekan Penuh: Press the button fully down to trigger the camera's shutter.
- Lock for Bulb/Continuous: For bulb mode or continuous shooting, press the shutter button fully down and slide the "HOLD" switch upwards to lock it in the depressed position. Slide it back down to release.
6.2. Fungsi Pemasa
The remote offers four primary timer settings: Delay, Long Exposure (BULB), Interval, and Number of Shots.
- Memasuki Tetapan: Tekan ke SET button to enter the setting mode. The current parameter will blink.
- Navigating Parameters: Gunakan Kiri/Kanan arrow buttons to cycle through Delay, Long Exposure, Interval, and Number of Shots.
- Melaraskan Nilai: Gunakan Atas/Bawah arrow buttons to change the value of the selected parameter. Values can be set from 0 seconds up to 99 hours, 59 minutes, 59 seconds.
- Mengesahkan Tetapan: Tekan SET again to confirm the value and move to the next digit or parameter.
- Exiting Settings: After setting all desired parameters, press SET until the display stops blinking, or wait a few seconds for it to automatically exit.
6.2.1. Delay (DELAY)
Sets the time before the first photo is taken. Useful for self-portraits or to allow vibrations to settle after pressing the start button.
- Range: 0 seconds to 99 hours, 59 minutes, 59 seconds.
6.2.2. Long Exposure (LONG) / BULB
Determines the duration the camera's shutter remains open for each shot. This function requires the camera to be set to BULB mode for exposures longer than 30 seconds.
- Range: 0 seconds to 99 hours, 59 minutes, 59 seconds.
- Set to "0" if your camera is not in BULB mode and you want the camera to control shutter speed.
6.2.3. Interval (INTVL)
Sets the time between the start of one exposure and the start of the next. For time-lapse photography, ensure the interval is longer than the Long Exposure time to allow the camera to process the image.
- Range: 1 second to 99 hours, 59 minutes, 59 seconds.
6.2.4. Number of Shots (N)
Specifies how many photos the remote will trigger.
- Range: 1 to 399 shots.
- Set to "--" for infinite shots (the sequence will continue until manually stopped).
6.3. Memulakan dan Menghentikan Pemasa
- To start the programmed sequence, press the TIMER START/STOP button. The timer icon will appear on the LCD.
- To stop the sequence at any time, press the TIMER START/STOP button again. The timer icon will disappear.
6.4. Lampu Latar LCD
Tekan ke Backlight / Lock button (the one with the lightbulb icon) to illuminate the LCD screen for better visibility in dark environments. The backlight will automatically turn off after a few seconds to conserve battery power.
6.5. Button Lock Function
To prevent accidental button presses during a timer sequence or transport, press and hold the Backlight / Lock button until a lock icon appears on the LCD. To unlock, press and hold the button again until the lock icon disappears.
7. Penyelenggaraan
- Pembersihan: Use a soft, dry cloth to clean the remote control. Do not use liquid cleaners or solvents.
- Storan: When not in use for extended periods, remove the batteries to prevent leakage and store the remote in a cool, dry place.
- Penjagaan Kabel: Avoid sharp bends or kinks in the cable. Do not pull on the cable to disconnect it from the camera; always grasp the connector.
8. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Alat kawalan jauh tidak boleh dihidupkan / LCD kosong. | Bateri mati atau tidak dipasang dengan betul. | Gantikan bateri dengan bateri AAA baharu, memastikan kekutuban yang betul. |
| Shutter does not trigger. |
|
|
| Timer sequence does not start. |
|
|
| Pengaturan masa yang tidak tepat. | Minor variations are inherent in some timer remotes. | While generally accurate for most uses, precise scientific timing may require specialized equipment. For typical time-lapse, minor deviations are usually negligible. |
9. Spesifikasi
| Ciri | Perincian |
|---|---|
| Nombor Model | 10-AP-TR1N |
| Dimensi (L x W x D) | 15.4cm x 4cm x 1.8cm (remote body only) |
| Panjang Kord | Kira-kira 14 inci (35.5 cm) |
| Berat badan | 1.6 auns (lebih kurang 45g) |
| Sumber Kuasa | 2 x Bateri AAA |
| Hayat Bateri | Approx. 1,400 hours (estimated) |
| Masa Kelewatan | 0s hingga 99j 59m 59s |
| Long Exposure Time | 0s hingga 99j 59m 59s |
| Masa Selang | 1s hingga 99j 59m 59s |
| Bilangan Pukulan | 1 to 399, or infinite (--) |
| Paparan | LCD bercahaya |
| Keserasian | Nikon D1, D2, D3, D3x, D3s, D4, D100, D200, D300, D300s, D700, D800, D800E; Fujifilm S3 Pro, S5 Pro |
10. Waranti dan Sokongan
10.1. Waranti Pengeluar
This product is covered by a 24-month manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accident, unauthorized modification, or improper storage.
For warranty claims, please retain your proof of purchase.
10.2. Sokongan Pelanggan
For technical assistance, troubleshooting, or general inquiries, please contact Fotodiox customer support. Visit the official Fotodiox webtapak untuk maklumat hubungan dan sumber tambahan.
Fotodiox Store: https://www.amazon.com/stores/FotodioxInc/page/6DCBAB1A-49E0-42F0-87E7-D9E76AB67C47
