Fotodiox AP-TR1C

Fotodiox Aputure Remote Shutter Release Timer/Intervalometer (Model: AP-TR1C)

Manual Arahan Pengguna

pengenalan

This manual provides detailed instructions for the operation and maintenance of the Fotodiox Aputure Remote Shutter Release Timer/Intervalometer, model AP-TR1C. This device is designed to control camera shutter functions, enabling precise timing for various photographic applications such as time-lapse, long exposure, and self-portraits.

Fotodiox Aputure Remote Shutter Release Timer/Intervalometer with cable

Gambar 1: Lebihview of the Aputure Remote Shutter Release Timer/Intervalometer.

Ciri-ciri Utama

Keserasian

This remote shutter release is compatible with a wide range of camera models. Please verify your camera model against the list below:

Persediaan

1. Pemasangan Bateri

The Aputure Remote Shutter Release requires two AAA batteries for operation. Batteries are not included with the device.

  1. Cari petak bateri di belakang alat kawalan jauh.
  2. Luncurkan penutup petak bateri terbuka.
  3. Masukkan dua bateri AAA, pastikan kekutuban (+/-) betul seperti yang ditunjukkan di dalam petak.
  4. Tutup penutup petak bateri dengan selamat.
belakang view of the remote showing battery compartment

Rajah 2: Belakang view of the remote, indicating the battery compartment.

2. Menyambung ke Kamera

Connect the remote to your camera's remote control terminal.

  1. Locate the remote control terminal on your camera. Refer to your camera's instruction manual if unsure.
  2. Insert the 2.5mm jack of the remote's cable into the camera's remote control terminal. Ensure it is fully inserted.
Close-up of the 2.5mm jack cable connector

Figure 3: Close-up of the remote's 2.5mm jack connector.

Arahan Operasi

The remote features an LCD screen and several buttons for setting various parameters. Familiarize yourself with the controls:

Close-up of the remote's LCD screen and control buttons

Rajah 4: Depan view of the remote showing the LCD and control buttons.

Setting Timer Functions

The remote allows you to program various shooting parameters. Use the MODE button to select the desired function and the directional buttons to adjust values.

1. Delay (SELF)

This function sets a delay before the first shot is taken. Ideal for self-portraits or to avoid camera shake from pressing the shutter button.

2. Interval (INT)

This function sets the time between consecutive shots, commonly used for time-lapse photography.

3. Long Exposure (LONG)

This function controls the duration of the shutter being open for long exposure photography. Your camera must be set to Bulb mode for this function to work correctly.

4. Number of Frames (N)

This function sets the total number of photos to be taken in a sequence.

Starting and Stopping a Sequence

Once all desired parameters (Delay, Interval, Long Exposure, Number of Frames) are set:

Penyelenggaraan

Menyelesaikan masalah

MasalahKemungkinan PuncaPenyelesaian
Remote does not power on or LCD is blank.
  • Bateri mati atau tidak dimasukkan dengan betul.
  • Petak bateri tidak ditutup dengan betul.
  • Gantikan bateri AAA dengan yang baharu.
  • Pastikan bateri dimasukkan dengan polariti yang betul.
  • Sahkan penutup petak bateri ditutup dengan selamat.
Kamera tidak bertindak balas terhadap alat kawalan jauh.
  • Cable not fully connected to camera.
  • Camera not set to appropriate mode (e.g., Bulb mode for long exposure).
  • Remote's lock switch is engaged.
  • Model kamera yang tidak serasi.
  • Ensure the 2.5mm jack is fully inserted into the camera's remote terminal.
  • Check camera settings and ensure it's ready to receive remote commands.
  • Disengage the lock switch on the remote.
  • Verify your camera model is listed in the "Compatibility" section.
Timer sequence does not start or stops unexpectedly.
  • START/STOP button not pressed firmly.
  • Parameters set incorrectly (e.g., interval too short for camera's processing time).
  • Press START/STOP button firmly until the sequence begins.
  • Review and adjust delay, interval, and long exposure settings.

Spesifikasi

ParameterNilai
JenamaFotodiox
ModelAP-TR1C
Dimensi Produk (LxWxH)2.54 x 2.54 x 2.54 cm (1 x 1 x 1 inci)
Berat Barang159 g (0.35 paun)
Sumber KuasaDikuasakan Bateri
Jenis BateriAAA (x2)
Peranti SerasiCameras (Canon, Pentax, Hasselblad, Contax, Samsung as listed)
Jenis PengawalKawalan Butang
Shutter Delay Range1 saat hingga 100 jam
Julat Selang1 saat hingga 100 jam
Bilangan Pukulan1 to 399, or infinite
Panjang KabelKira-kira 14 inci (35.5 cm)

Waranti dan Sokongan

This Fotodiox product is covered by a 24-Month Fotodiox Warranty dari tarikh pembelian. Waranti ini meliputi kecacatan pembuatan dan mutu kerja di bawah penggunaan biasa.

For technical support, warranty claims, or further assistance, please contact Fotodiox customer service through their official webtapak atau peruncit tempat produk itu dibeli.

Dokumen Berkaitan - AP-TR1C

Praview Nota Keluaran Aruba Instant 8.10.0.0
Nota keluaran untuk Aruba Instant 8.10.0.0, memperincikan ciri baharu, peningkatan, isu yang diselesaikan, isu yang diketahui dan prosedur peningkatan untuk pusat akses Aruba.
Praview Sistem Operasi Segera Rangkaian HPE Aruba 8.12.0.3 Nota Keluaran
Dokumen ini menyediakan nota keluaran untuk Sistem Pengendalian Segera Rangkaian HPE Aruba versi 8.12.0.3, memperincikan ciri baharu, platform yang disokong, isu yang diselesaikan dan prosedur peningkatan.
Praview Nota Keluaran HPE Aruba Networking Instant OS 8.12.0.4
Dokumen ini menyediakan nota keluaran untuk Sistem Pengendalian Segera Rangkaian HPE Aruba versi 8.12.0.4, memperincikan ciri baharu, penambahbaikan, isu yang diselesaikan dan isu yang diketahui untuk pelbagai model Titik Akses Aruba.
Praview Pintu Barn Aputure F10: Manual Pemasangan dan Panduan Waranti
Panduan komprehensif untuk Pintu Barn Aputure F10, meliputi pemasangan, senario aplikasi, arahan keselamatan dan butiran waranti. Mempunyai penerangan teks terperinci gambar rajah dan arahan yang jelas untuk kawalan pencahayaan profesional.
Praview Nota Keluaran Aruba Instant 8.10.0.6: Kemas Kini dan Panduan Teknikal
Dokumen ini menyediakan nota keluaran komprehensif untuk Aruba Instant versi 8.10.0.6. Ia memperincikan isu yang diselesaikan dan diketahui, platform perkakasan yang disokong, dan prosedur peningkatan penting untuk Pusat Akses Aruba, menawarkan maklumat teknikal penting untuk pentadbir rangkaian.
Praview Nota Keluaran Aruba Instant 8.9.0.0
Dokumen ini menyediakan nota keluaran untuk Aruba Instant versi 8.9.0.0, memperincikan ciri baharu, peningkatan, isu yang diselesaikan dan pengehadan yang diketahui untuk titik akses Aruba.