pengenalan
Terima kasih kerana membeliasing the SENTRY CL933 Big Screen Weather Alarm Clock. This device combines a digital alarm clock with a large LCD display, providing essential information such as time, date, indoor temperature, humidity, and a weather forecast. This manual will guide you through the setup, operation, and maintenance of your new alarm clock.
Maklumat Keselamatan
- Jangan dedahkan unit kepada suhu yang melampau, cahaya matahari langsung atau kelembapan yang tinggi.
- Elakkan daripada menjatuhkan atau menyebabkan unit terkena hentakan yang kuat.
- Jangan campurkan bateri lama dan baharu, atau jenis bateri yang berlainan.
- Tanggalkan bateri jika unit tidak akan digunakan untuk tempoh yang lama.
- Bersihkan unit dengan kain lembut dan kering. Jangan gunakan pembersih atau pelarut yang melelas.
- Produk ini adalah untuk kegunaan dalaman sahaja.
Kandungan Pakej
Sila pastikan semua item ada:
- SENTRY CL933 Big Screen Weather Alarm Clock
- Manual Pengguna (dokumen ini)
Produk Selesaiview
The SENTRY CL933 features a large, easy-to-read LCD display and intuitive controls. Familiarize yourself with the main components:
The SENTRY CL933 Big Screen Weather Alarm Clock displayed in its retail packaging, showing the clock face with time, weather forecast, humidity, and temperature readings.
Elemen Paparan:
- Paparan Masa: Shows current time (12/24 hour format).
- Date & Day of Week: Displays the current date and day.
- Ikon Ramalan Cuaca: Indicates predicted weather conditions (e.g., sunny, cloudy, rainy).
- Moon Phase Icon: Shows the current moon phase.
- Paparan suhu: Shows indoor temperature in Celsius or Fahrenheit.
- Paparan Kelembapan: Shows indoor humidity percentage.
- Comfort Level Icon: Menunjukkan tahap keselesaan berdasarkan suhu dan kelembapan.
- Petunjuk Trend Suhu: Shows if the temperature is rising, falling, or stable over the last 12 hours.
- Ikon Penggera: Indicates when the alarm is set.
Control Buttons (typically on the back or sides):
- MODE/SET Button: Used to switch between display modes and enter setting mode.
- Butang ATAS/BAWAH: Used to adjust values during setting and sometimes to toggle display options.
- Butang PENGGERA: Used to set or activate/deactivate the alarm.
- SNOOZE/LIGHT Button: Activates the backlight and functions as the snooze button when the alarm sounds.
- Butang °C/°F: Togol antara paparan suhu Celsius dan Fahrenheit.
Persediaan
1. Pemasangan Bateri
- Cari penutup petak bateri di bahagian belakang unit.
- Tanggalkan penutup dengan menggeser atau mengangkatnya.
- Insert two (2) new AAA batteries (not included) according to the polarity indicators (+ and -) inside the compartment.
- Gantikan penutup petak bateri dengan selamat.
- The clock will power on and the display will activate.
2. Penempatan Awal
Place the alarm clock on a stable, flat surface away from direct heat sources, strong vibrations, or areas with extreme temperature fluctuations for accurate readings.
Arahan Operasi
1. Menetapkan Masa dan Tarikh
- Tekan dan tahan butang MOD/SET button for approximately 3 seconds to enter time setting mode. The hour digit will start flashing.
- Gunakan UP or TURUN butang untuk melaraskan jam.
- Tekan MOD/SET sekali lagi untuk mengesahkan jam dan beralih ke tetapan minit.
- Repeat steps 2 and 3 for minutes, year, month, and day.
- Selepas menetapkan hari, tekan MOD/SET sekali lagi untuk keluar dari mod tetapan.
- To switch between 12-hour and 24-hour time format, press the UP butang semasa jam berkelip semasa tetapan masa.
2. Menetapkan Penggera
- Tekan ke PENGGERA butang sekali untuk memaparkan masa penggera semasa.
- Tekan dan tahan butang PENGGERA button for approximately 3 seconds. The alarm hour digit will start flashing.
- Gunakan UP or TURUN butang untuk melaraskan jam penggera.
- Tekan PENGGERA sekali lagi untuk mengesahkan jam dan beralih ke tetapan minit penggera.
- Gunakan UP or TURUN butang untuk melaraskan minit penggera.
- Tekan PENGGERA one last time to confirm and exit alarm setting mode.
- Untuk mengaktifkan atau menyahaktifkan penggera, tekan PENGGERA button briefly when the current time is displayed. An alarm icon will appear on the display when the alarm is active.
3. Fungsi Tunda dan Lampu Latar
- Apabila penggera berbunyi, tekan SNOOZE / CAHAYA button to activate the snooze function. The alarm will temporarily stop and sound again after a few minutes (typically 5-10 minutes).
- Untuk mematikan penggera sepenuhnya, tekan sebarang butang lain (cth., PENGGERA, MOD/SET) when the alarm is sounding.
- Tekan ke SNOOZE / CAHAYA button at any time to activate the backlight for a few seconds, illuminating the display for easy viewing in low light conditions. The backlight is not designed to stay on continuously to conserve battery life.
4. Temperature Unit Selection (°C/°F)
Tekan ke ° C / ° F button (usually located on the back or side) to toggle the temperature display between Celsius and Fahrenheit.
5. Understanding Weather and Environmental Displays
- Ramalan cuaca: The icon (e.g., sun, clouds, rain) represents a prediction of the weather for the next 12-24 hours based on atmospheric pressure changes detected by the internal sensor. This is an estimate and may not always match official weather reports.
- Kelembapan: Displays the current indoor relative humidity percentage.
- Tahap Keselesaan: An icon (e.g., smiley face, neutral face, frowny face) indicates the indoor comfort level based on the combination of temperature and humidity.
- Trend Suhu: The arrow indicator shows if the indoor temperature has been rising, falling, or remaining stable over the past 12 hours.
- Fasa Bulan: The moon icon changes to reflect the current phase of the moon.
Penyelenggaraan
- Pembersihan: Lap unit dengan lembut, sedikit damp kain. Jangan gunakan bahan kimia yang keras atau bahan yang melelas.
- Penggantian Bateri: When the display becomes dim or functions become erratic, replace the two AAA batteries. Ensure correct polarity.
- Storan: Jika menyimpan jam untuk tempoh yang lama, tanggalkan bateri untuk mengelakkan kebocoran.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca / Penyelesaian |
|---|---|
| Paparan kosong atau malap. | Batteries are low or incorrectly installed. Replace with new AAA batteries, ensuring correct polarity. |
| Time/Date cannot be set. | Pastikan anda menekan dan menahan MOD/SET butang selama 3 saat untuk memasuki mod tetapan. |
| Penggera tidak berbunyi. | The alarm may not be activated. Press the PENGGERA button briefly to ensure the alarm icon is displayed. Check alarm time setting. |
| Suhu/kelembapan yang tidak tepat. | The unit may be placed near a heat source, vent, or in direct sunlight. Move the clock to a more stable environment. Readings are for indoor conditions only. |
| Ramalan cuaca nampaknya salah. | The weather forecast is an estimate based on internal barometric pressure changes and may not always align with local weather reports. It is a general trend indicator. |
Spesifikasi
- model: CL933
- Jenama: SENTRY
- Jenis Paparan: LCD Digital dengan Lampu Latar
- Sumber Kuasa: Dikuasakan Bateri
- Bateri Diperlukan: 2 x AAA (tidak termasuk)
- Dimensi: 6.5 x 2.25 x 4.25 inci (16.5 x 5.7 x 10.8 cm)
- Berat: 6.2 auns (176 gram)
- ciri-ciri: Time, Date, Day of Week, Alarm, Snooze, Indoor Temperature (°C/°F), Indoor Humidity, Weather Forecast Icons, Moon Phase, Comfort Level Indicator, 12-hour Temperature Trend.
- Jenis Pemasangan: Atas meja
Waranti dan Sokongan
SENTRY products are designed for reliability and performance. For any questions, technical support, or warranty inquiries, please refer to the contact information provided with your purchase or visit the official SENTRY webtapak. Sila simpan bukti pembelian anda untuk tuntutan waranti.
