pengenalan
The wolfcraft Drill Stand 5027000 is designed to provide controlled and precise drilling for various workpieces. Its robust construction ensures straight drilling without twisting, allowing for accurate depth setting and stable operation. This manual provides essential information for the safe and effective use of your drill stand.
Imej: Depan view of the wolfcraft Drill Stand 5027000, showcasing its robust design and main components.
Arahan Keselamatan
Always observe the following safety precautions when operating the drill stand:
- Baca dan fahami semua arahan sebelum digunakan.
- Pakai peralatan pelindung diri (PPE) yang sesuai, termasuk cermin mata keselamatan dan pelindung pendengaran.
- Ensure the drill stand is securely mounted on a stable, level workbench.
- Always secure your workpiece firmly using clamps or a vice to prevent movement during drilling.
- Disconnect the power drill from the mains before making any adjustments or changing drill bits.
- Jauhkan tangan dan pakaian longgar daripada bahagian yang bergerak.
- Do not force the drill. Allow the drill bit to do the work.
- Pastikan kawasan kerja bersih dan terang.
- Do not operate the drill stand in damp atau keadaan basah.
- Store the drill stand in a dry, secure location when not in use.
Kandungan Pakej
Sahkan bahawa semua komponen hadir semasa membongkar:
- 1 x wolfcraft Drill Stand 5027000
No additional components are included beyond the drill stand itself.
Persediaan dan Perhimpunan
Follow these steps to assemble and prepare your drill stand for use:
- Perhimpunan Pangkalan dan Lajur: Securely attach the 40 mm round column to the base. Ensure all fasteners are tightened to prevent any movement or instability.
- Mounting the Power Drill: The drill stand features a Euronorm collar with a 43 mm diameter. Insert your power drill into this collar and tighten the clamping mechanism firmly. Ensure the drill is centered and held securely.
- Adjusting the Operating Unit: The operating unit, which holds the power drill, can be adjusted vertically along the toothed rack. Use the rack-and-pinion drive for convenient and precise height adjustment.
- Pengurusan Kabel: Utilize the integrated cable holder to route the power cable of your drill, preventing it from interfering with operation or getting damaged.
Image: Dimensional drawing of the wolfcraft Drill Stand 5027000, showing key measurements for setup and workspace planning.
Image: Detail of the cable holder on the drill stand, illustrating proper cable routing for safety and convenience.
Arahan Operasi
To achieve precise and controlled drilling, follow these operational steps:
- Bahan Kerja Selamat: Place your workpiece on the base of the drill stand. Use appropriate clamps or a vice, which can be attached to the clamping grooves on the base, to hold the workpiece firmly in position.
- Adjust Drilling Height: Use the rack-and-pinion drive to adjust the height of the operating unit so that the drill bit is positioned correctly above your workpiece.
- Set Drilling Depth: Utilize the depth stop with its quick adjuster and scale ring. Set the desired drilling depth precisely to the millimeter. This ensures consistent hole depths across multiple operations.
- Initiate Drilling: With the workpiece secured and depth set, activate your power drill. Use the 3-arm feed lever to comfortably lower the operating unit and drill into the workpiece. The return spring will assist in moving the machine back up after drilling.
- Pantau dan Kawalan: Maintain a steady, controlled feed rate. Avoid excessive pressure, which can damage the drill bit or the workpiece.
Image: The drill stand in operation, demonstrating its capability to drill precisely into both a metal pipe and a wooden plank, with workpieces secured by a vice.
Penyelenggaraan
Regular maintenance ensures the longevity and optimal performance of your drill stand:
- Pembersihan: After each use, clean the drill stand to remove dust, chips, and debris. Use a dry cloth or brush. Avoid using harsh chemicals that could damage the finish.
- Pelinciran: Periodically apply a light lubricant to the column and rack-and-pinion mechanism to ensure smooth operation.
- Pemeriksaan: Regularly inspect all fasteners and moving parts for wear or damage. Tighten any loose screws. Replace worn components as necessary.
- Storan: Store the drill stand in a clean, dry environment, protected from moisture and extreme temperatures.
Menyelesaikan masalah
If you encounter issues with your drill stand, consider the following common solutions:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Drill not moving smoothly up/down | Lack of lubrication, debris in rack, loose components. | Clean the column and rack. Apply lubricant. Check and tighten all assembly screws. |
| Inaccurate drilling depth | Depth stop not set correctly, depth stop loose. | Re-adjust the depth stop, ensuring it is securely locked. Verify the scale ring setting. |
| Drill wobbles or is not straight | Power drill not securely clamped, column or base fasteners loose. | Ensure the power drill is tightly secured in the Euronorm collar. Check and tighten all assembly fasteners for the column and base. |
| Workpiece moves during drilling | Workpiece not properly secured. | Sentiasa gunakan clamps or a vice to firmly hold the workpiece to the base. |
If problems persist, contact wolfcraft customer support.
Spesifikasi
| Ciri | Perincian |
|---|---|
| Jenama | kraf serigala |
| Nombor Model | 5027000 |
| Sumber Kuasa | Hand-powered (requires external power drill) |
| Maximum Chuck Size (Euronorm Collar) | 43 Milimeter |
| Diameter Lajur | 40 mm |
| Column Length (Toothed Rack) | 420 mm |
| Ciri Khas | Precise Drilling, Depth Stop with Quick Adjuster, Scaled Drilling Depth |
| Dimensi Produk (L x W x H) | 21.65" x 9.65" x 22.87" (approx. 550mm x 245mm x 581mm) |
| bahan | Aluminium die-cast |
| Berat Barang | 7.98 Kilogram (lebih kurang 17.56 paun) |
| Kayu Kapasiti Gerudi | 40 Milimeter |
| Logam Kapasiti Penggerudian | 10 Milimeter |
| UPC | 790295983620, 772040282677 |
Waranti
The wolfcraft Drill Stand 5027000 comes with a Jaminan 10 tahun, reflecting the manufacturer's commitment to quality and durability. Please retain your proof of purchase for warranty claims.
Image: Logo indicating a 10-year guarantee for the product.
Sokongan dan Hubungan
For further assistance, technical support, or warranty inquiries, please contact wolfcraft customer service or visit their official webtapak:
- Pengeluar: wolfcraft GmbH
- Alamat: Wolffstraße 1, 56746 Kempenich, Jerman
- Webtapak: www.wolfcraft.com (Sila rujuk kepada website for regional contact information)
Image: Close-up of the manufacturer's label on the drill stand, showing wolfcraft GmbH contact details.
