1. Pengenalan
Terima kasih kerana membeliasing the Sangean WR-2CL FM-Stereo RBDS/AM Digital Tuning Portable Receiver. This receiver features a clear, transparent polyurethane cabinet, offering a unique aesthetic while delivering high-quality audio. It is equipped with a PLL Synthesized Tuning System for precise station selection and an easy-to-read LCD display.
This manual provides essential information for the proper setup, operation, and maintenance of your device. Please read it thoroughly before use to ensure optimal performance and longevity.
Ciri-ciri Utama:
- Transparent Polyurethane Cabinet
- 10 Memory Preset Stations (5 FM/5 AM)
- Paparan LCD yang Mudah Dibaca
- PLL Synthesized Tuning System
- Fungsi Jam
- Adjustable Sleep Timer and Snooze Function
- Bass Compensation for Richer Bass
- Rotary Bass dan Kawalan Treble
- 3" 7W Full Range Speaker with Enlarged Magnet
- 9-15 Jldtage Power Adapter Jack for Vehicle Power
- External AM Antenna Terminal
- Stereo Headphone Jack
- REC-Out
2. Persediaan
2.1 Sambungan Kuasa
Connect the supplied AC power cord to the AC INPUT jack on the rear of the receiver and then plug it into a standard 120V 60Hz wall outlet. The unit can also be powered by a 9-15V DC power adapter (not included) via the DC IN jack for vehicle use.
2.2 Sambungan Antena
For optimal reception, connect the included FM antenna to the FM ANTENNA terminal on the rear panel. For AM reception, connect the included AM antenna to the AM EXT. terminals. Ensure the INTERNAL/EXTERNAL antenna switch is set to the appropriate position.
2.3 Sambungan Audio
- Aux-in: Connect external audio devices (e.g., MP3 player) to the AUX IN jack using a 3.5mm audio cable.
- Fon kepala: For private listening, plug stereo headphones into the STEREO HEADPHONE JACK.
- Subwufer Keluar: Connect an external subwoofer to the SUBWOOFER OUT jack for enhanced bass.
- REC-Out: Use the REC-OUT jack to connect to a recording device.
3. Arahan Operasi
3.1 Power On/Off and Source Selection
Tekan ke KUASA/ISI PADU knob to turn the unit on or off. Press the SUMBER button repeatedly to cycle through available audio sources: FM, AM, USB, Bluetooth, and Aux-in.
3.2 Tuning and Volume Control
- tuning: Putar MENALA knob to manually select radio frequencies. For automatic station seeking, press the SEEK/SELECT butang.
- Kelantangan: Putar KUASA/ISI PADU tombol untuk melaraskan tahap output audio.
3.3 Stesen Pratetap
The receiver allows you to store up to 10 favorite stations (5 FM, 5 AM). To store a station, tune to the desired frequency, then press and hold one of the preset number buttons (1-5) until the display confirms storage. To recall a preset station, simply press the corresponding preset number button.
3.4 Tone Control and Dimmer
- Bass and Treble: Gunakan yang berdedikasi ROTARY BASS AND TREBLE CONTROL knobs to fine-tune the audio's bass and treble levels according to your preference.
- Lebih malap: Putar DIMMER knob to adjust the brightness of the LCD display.
3.5 Berpasangan Bluetooth
To pair a Bluetooth device, select the Bluetooth source mode. The display will indicate 'Pairing'. On your mobile device, search for 'SANGEAN WR-2CL' and select it to connect. Once paired, you can stream audio wirelessly to the receiver.
4. Spesifikasi
| Ciri | Perincian |
|---|---|
| Paparan | LCD, Graphic 128 x 64 |
| View Kawasan | 3.5" x 2.16" |
| Earphones Output | 5 + 5 mW |
| Bekalan Kuasa | 120V 60 Hz (AC) / 9-15V (DC) |
| Dimensi (WxHxD) | 9.45" x 4.41" x 7.61" |
| Berat badan | 5 paun 10.6 oz |
| Teknologi Penala | AM/FM (PLL Synthesized) |
| Teknologi Ketersambungan | Bantu, Bluetooth |
| Penceramah | 3" 7W Full Range Speaker |
5. Penyelenggaraan
To ensure the longevity and optimal performance of your Sangean WR-2CL receiver, follow these maintenance guidelines:
- Pembersihan: Use a soft, dry cloth to clean the exterior of the unit. Avoid using abrasive cleaners, waxes, or solvents as they may damage the cabinet finish.
- Pengudaraan: Ensure adequate ventilation around the receiver. Do not block any ventilation openings.
- penempatan: Place the unit on a stable, level surface away from direct sunlight, heat sources, and excessive moisture.
- Kord Kuasa: Regularly inspect the power cord for any damage. If damaged, discontinue use and replace with an approved cord.
6. Penyelesaian masalah
If you encounter any issues with your Sangean WR-2CL, refer to the following common troubleshooting steps:
- Tiada Kuasa: Ensure the AC power cord is securely plugged into both the receiver and a working wall outlet. If using DC power, verify the adapter is correctly connected and providing the correct voltage.
- Penerimaan Radio yang lemah: Extend and adjust the FM antenna for better FM reception. For AM, ensure the AM antenna is properly connected and positioned away from electronic devices that may cause interference. Try adjusting the INTERNAL/EXTERNAL antenna switch.
- No Audio from External Device (Aux-in/Bluetooth): Verify that the correct source is selected on the receiver. Check the volume level on both the receiver and the external device. For Bluetooth, ensure the device is properly paired.
- Tiada Bunyi dari Fon Kepala: Ensure headphones are fully inserted into the jack. Adjust the volume.
If problems persist after trying these steps, please contact Sangean customer support.
7. Waranti dan Sokongan
7.1 Maklumat Waranti
Your Sangean WR-2CL receiver comes with a limited warranty. Please refer to the warranty card included in your product packaging for specific terms, conditions, and registration details. Keep your purchase receipt as proof of purchase for warranty claims.
7.2 Apa yang ada di dalam Kotak
- Sangean WR-2CL Receiver
- Manual Pemilik
- Kord Kuasa AC
- Antena FM
- Antena AM
7.3 Sokongan Pelanggan
For further assistance, technical support, or service inquiries, please visit the official Sangean weblaman web atau hubungi jabatan khidmat pelanggan mereka menggunakan maklumat yang diberikan dalam dokumentasi jaminan anda.
