JBL Stage 602 6-1/2" 2-Way Coaxial Car Audio Speakers User Manual

pengenalan

This manual provides comprehensive instructions for the installation, operation, and maintenance of your JBL Stage 602 6-1/2" 2-Way Coaxial Car Audio Speakers. Please read this manual thoroughly before attempting installation or operation to ensure proper use and optimal performance.

Ciri-ciri Utama

• Jenis pembesar suara: 6.5" Stage Series 2-Way Coaxial Car Speakers
• Bahan kerucut: Injection-molded polypropylene cone for enhanced durability and sound quality.
• Tweeter: PEI Balanced Dome Tweeter for clear high-frequency reproduction.
• Impedans: 4 ohms, optimized for compatibility with a wide range of car audio systems.
• Respons Kekerapan: 55 - 22000 Hz, providing a broad audio spectrum.
• Sensitiviti: 91dB, ensuring efficient power conversion into sound.
• Pengendalian Kuasa: 135W Peak / 45W RMS per speaker.
• Top-Mount Depth: 2-5/16" for flexible installation.

Kandungan Pakej

Your JBL Stage 602 speaker package typically includes the following items:

• Two (2) JBL Stage 602 6-1/2" Coaxial Speakers
• Dua (2) Jeriji Pembesar Suara
• Perkakasan Pemasangan (skru, klip)
• Speaker Brackets (for various mounting options)
• Speaker Foam (for minimizing unwanted sounds/vibrations)
• Owner's Manual / Documentation

Persediaan dan Pemasangan

Proper installation is crucial for optimal sound performance and speaker longevity. If you are unsure about any steps, it is recommended to seek professional assistance.

1. Langkah-langkah Keselamatan

• Putuskan sambungan bateri kenderaan sebelum memulakan sebarang kerja elektrik.
• Pakai peralatan keselamatan yang sesuai, termasuk perlindungan mata.
• Ensure all wiring is correctly connected to prevent damage to the speakers or vehicle's electrical system.
• Avoid overtightening screws to prevent stripping or damaging mounting surfaces.

2. Bersedia untuk Pemasangan

1. Keluarkan Pembesar Suara Sedia Ada: Carefully remove the existing car audio speakers from their mounting locations (e.g., door panels, rear deck). This may involve removing trim panels, screws, and disconnecting wiring.
2. Semak Kelengkapan: Compare the JBL Stage 602 speakers with the original speakers and the mounting location. Use the provided mounting brackets if necessary to ensure a secure fit.
3. Pendawaian: Identify the positive (+) and negative (-) speaker wires from your vehicle's audio system. Ensure proper polarity when connecting the new speakers.

3. Pemasangan Speaker

1. Penceramah selamat: Place the JBL Stage 602 speakers into the prepared mounting locations. Use the provided screws to secure them firmly. If using mounting brackets, attach the brackets first, then the speakers to the brackets.
2. Sapukan Buih: Apply the included speaker foam around the speaker's edge where it meets the mounting surface. This helps to minimize vibrations and improve sound quality by creating a better seal.
3. Sambungan Pendawaian: Connect the vehicle's speaker wires to the terminals on the JBL Stage 602 speakers. Ensure the positive (+) wire connects to the positive terminal and the negative (-) wire connects to the negative terminal.
4. Install Grilles: If desired, attach the speaker grilles over the speakers.
5. Pasang semula: Reassemble any removed trim panels or components.

4. General Installation Guidance

For a visual guide on upgrading car audio speakers, including insights into speaker components and mounting options, refer to the video below. This video provides general information applicable to JBL GTO series speakers, which share similar installation principles.

Mengendalikan Pembesar Suara Anda

Once installed, your JBL Stage 602 speakers will operate as part of your vehicle's existing audio system. No specific operational controls are on the speakers themselves.

• Sumber Audio: Mainkan audio melalui unit kepala kereta anda (radio, pemain CD, pemain media).
• Kawalan Kelantangan: Adjust the volume using your head unit's controls.
• Kawalan Nada: Utilize your head unit's equalizer (EQ), bass, treble, and balance/fader controls to fine-tune the sound to your preference. Start with flat settings and make small adjustments.
• Tempoh Pecah Masuk: Allow a short break-in period (typically 10-20 hours of normal listening) for the speaker components to loosen up and achieve their optimal sound performance.

Penyelenggaraan dan Penjagaan

To ensure the longevity and continued performance of your JBL Stage 602 speakers, follow these maintenance guidelines:

• Pembersihan: Lap jeriji pembesar suara dan sekelilingnya dengan lembut dengan kain kering yang lembut. Elakkan menggunakan bahan kimia yang keras atau pembersih yang kasar.
• Elakkan terlalu kuat: Do not drive the speakers with an amplifier that exceeds their recommended RMS power handling (45W RMS per speaker) to prevent damage.
• Faktor Persekitaran: Protect speakers from extreme temperatures, direct sunlight for prolonged periods, and excessive moisture.
• Pemeriksaan Berkala: Periodically check the speaker cones and surrounds for any signs of damage or wear.

Menyelesaikan masalah

If you experience issues with your speakers, consult the following common troubleshooting steps:

Spesifikasi

Waranti dan Sokongan

JBL Stage 602 speakers come with a Waranti terhad 1 tahun. For warranty claims, technical support, or further assistance, please contact JBL customer service or visit the official JBL webtapak.

Untuk maklumat dan sokongan produk tambahan, anda boleh layari Kedai JBL di Amazon.