Leviton 1254-R

Leviton 15 Amp 125 Volt Industrial Grade 4-in-1 Receptacle (Model 1254-R) Instruction Manual

Model: 1254-R

1. Pengenalan

This manual provides detailed instructions for the safe installation, operation, and maintenance of the Leviton 15 Amp, 125 Volt, Industrial Series Extra Heavy Duty Grade, 4-In-1 Receptacle, Model 1254-R. This device is designed for demanding environments requiring high-abuse tolerance, such as healthcare facilities, manufacturing plants, and educational institutions. It features four outlets in a single-gang footprint, offering increased power access without requiring larger electrical boxes.

2. Maklumat Keselamatan

AMARAN: To avoid fire, shock, or death, turn off power at the circuit breaker or fuse box and test that power is off before wiring. All wiring must be in accordance with national and local electrical codes. If you are unsure about any part of these instructions, consult a qualified electrician.

3. Kandungan Pakej

The package for the Leviton 1254-R 4-in-1 Receptacle typically includes:

4. Spesifikasi

CiriPerincian
Nombor Model1254-R
Amppemadam15 Amp
Voltage125 Volt
GredIndustrial Series Extra Heavy Duty Grade
Jenis Bekas4-In-1, Straight Blade, Grounding
warnamerah
bahanThermoplastic Nylon (Cover and Body)
Pilihan PendawaianBack and Side Wiring
KenalanExtra Heavy-Duty, T-type triple-wipe bronze
DimensiKira-kira 8 x 8 x 8 inci (Saiz Produk)
Berat badanKira-kira 6.4 auns

5. Pemasangan

Follow these steps for proper installation of your Leviton 4-in-1 Receptacle. If you are not familiar with electrical wiring, consult a qualified electrician.

  1. Matikan Kuasa: Locate the circuit breaker or fuse that controls the outlet where you intend to install the receptacle. Turn it OFF. Verify that the power is off using a voltage penguji.
  2. Keluarkan Bekas Lama (jika berkenaan): Unscrew the wall plate and then the mounting screws holding the existing receptacle in the electrical box. Carefully pull the old receptacle out of the box.
  3. Putuskan Sambungan Wayar: Disconnect the wires from the old receptacle. Note which wire was connected to which terminal (hot, neutral, ground).
  4. Sediakan Wayar: Strip approximately 1/2 inch of insulation from the ends of the wires if necessary. Ensure the wire ends are clean and straight.
  5. Connect Wires to New Receptacle:
    • Sambungkan HOT (Black or Red) wayar ke Tembaga skru terminal.
    • Sambungkan NEUTRAL (Putih) wayar ke Perak skru terminal.
    • Sambungkan GROUND (Green or Bare Copper) wayar ke hijau skru pembumian.

    This receptacle supports both back-wiring (inserting wires into holes on the back and tightening screws) and side-wiring (wrapping wires around terminal screws). Ensure connections are tight and no bare wire is exposed outside the terminals.

    Leviton 1254-R 4-in-1 Receptacle, Red

    Imej 5.1: Depan view of the Leviton 1254-R 4-in-1 Receptacle in Red. This image shows the four outlets and the robust construction.

    Close-up of receptacle wiring terminals

    Imej 5.2: Jarak dekat view of a Leviton receptacle's wiring terminals, illustrating the side-wiring option and the grounding screw.

  6. Bekas Gunung: Tolak bekas berwayar kembali ke dalam kotak elektrik dengan berhati-hati. Selamatkannya dengan skru pelekap yang disediakan.
  7. Pasang Plat Dinding: Attach the wall plate over the receptacle.
  8. Pulihkan Kuasa: Turn the circuit breaker or fuse back ON.
  9. Ujian: Plug a device into each of the four outlets to ensure proper function.

The 1254-R features an interlocking thermoplastic nylon cover and body for enhanced durability and a nickel-plated brass strap with integral ground contacts for reliable grounding. The permanent "Green Dot" marking on the face indicates its hospital/industrial grade compliance.

Close-up of receptacle with green dot marking

Image 5.3: Detail showing the "Green Dot" marking, signifying the industrial/hospital grade rating of the receptacle.

6. Operasi

The Leviton 1254-R 4-in-1 Receptacle operates like any standard electrical outlet. Simply insert the plug of your electrical device into one of the four available receptacles. Ensure the plug is fully inserted for a secure connection. The extra heavy-duty, T-type triple-wipe bronze contacts provide maximum performance and a strong grip on cords.

7. Penyelenggaraan

This industrial-grade receptacle requires minimal maintenance. Periodically inspect the receptacle for any signs of damage, such as cracks, discoloration, or loose connections. If any damage is observed, turn off power at the circuit breaker and replace the receptacle immediately. Clean the surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.

8. Penyelesaian masalah

MasalahKemungkinan PuncaPenyelesaian
Tidak ada kuasa di wadah.Circuit breaker tripped or fuse blown. Loose wiring connection.Check and reset the circuit breaker or replace the fuse. Turn off power and inspect wiring connections for tightness.
Device plug feels loose in the outlet.Worn contacts (unlikely for new industrial grade). Incorrect plug type.Ensure the plug is fully inserted. If the issue persists, and the receptacle is old, consider replacement. Verify plug compatibility.
Receptacle is warm to the touch.Overload on the circuit. Loose wiring connection.Disconnect some devices to reduce load. Turn off power and check wiring connections. If warming persists, consult an electrician.

9. Maklumat Waranti

Leviton products are backed by a limited warranty. For specific warranty terms and conditions applicable to the 1254-R receptacle, please refer to the warranty documentation included with your purchase or visit the official Leviton webtapak. Simpan bukti pembelian anda untuk tuntutan waranti.

10. Sokongan

For technical assistance, product information, or customer support, please visit the official Leviton website or contact their customer service department. Contact details can typically be found on the product packaging or the Leviton webtapak.

Leviton Webtapak: www.leviton.com

Dokumen Berkaitan - 1254-R

Praview Outlet GFCI Leviton dengan Manual Pemasangan dan Operasi Port USB
Panduan komprehensif untuk memasang dan mengendalikan Outlet GFCI Leviton dengan Port USB, termasuk arahan pendawaian, amaran keselamatan, prosedur ujian dan maklumat waranti.
Praview Installing and Testing Leviton Smart GFCI Outlet: A Comprehensive Guide
Step-by-step instructions for installing and testing Leviton Smart GFCI outlets (models D2GF1, D2GF2). Learn about GFCI functionality, wiring, troubleshooting, and safety precautions.
Praview Panduan Pemasangan dan Pengujian Bekas GFCI Leviton SmartlockPro
Panduan komprehensif untuk memasang dan menguji soket Pemisah Litar Kerosakan Tanah (GFCI) Leviton SmartlockPro. Meliputi langkah berjaga-jaga keselamatan, pendawaian, penyelesaian masalah dan ciri produk.
Praview Panduan Pemasangan dan Pengujian Bekas Leviton GFCI
Panduan komprehensif tentang cara memasang dan menguji Bekas Leviton SmartLock Pro GFCI, termasuk arahan pendawaian, langkah berjaga-jaga keselamatan dan petua penyelesaian masalah.
Praview Leviton GFNT1-DIN/GFNT2-DIN DIN Panduan Pemasangan Bekas Rel GFCI
Panduan komprehensif untuk memasang dan menguji Bekas GFCI GFNT1-DIN dan GFNT2-DIN DIN Rail Mount Leviton, termasuk arahan pendawaian, langkah berjaga-jaga keselamatan dan penyelesaian masalah.
Praview Leviton Smart Wallbox Sensors: Elevate Your Sensing Control Options
Discover Leviton Smart Wallbox Sensors for commercial applications, offering occupancy/vacancy sensing, dimming, switching, energy savings, and code compliance for offices, meeting rooms, and lobbies. Learn about key features and benefits.