1. Pengenalan
This manual provides essential information for the safe and efficient operation of your Voltcraft FSP-1243 Regulated DC Power Supply. Please read these instructions thoroughly before using the device and retain them for future reference.
The Voltcraft FSP-1243 is a robust laboratory power supply designed to deliver a stable fixed voltage of 24 V/DC with a maximum current of 3 A, providing a total power output of 72 W. It features electronic stabilization for reliable performance.
2. Arahan Keselamatan
Observe the following safety precautions to prevent electric shock, injury, or damage to the device:
- Ensure the power supply is connected to a properly grounded outlet.
- Jangan kendalikan peranti dalam keadaan basah atau damp syarat.
- Avoid exceeding the maximum output current or voltage penilaian.
- Jangan buka casing; tiada bahagian yang boleh diservis oleh pengguna di dalamnya. Rujuk semua servis kepada kakitangan yang berkelayakan.
- Disconnect the power supply from the mains before making or breaking connections to the output terminals.
- Pastikan pengudaraan yang mencukupi di sekeliling unit untuk mengelakkan terlalu panas.
3. Kandungan Pakej
Sahkan bahawa semua item ada semasa membongkar:
- 1 x Voltcraft FSP-1243 Regulated DC Power Supply Unit
- 1 x Power Cord (country-specific)
- 1 x Manual Pengguna
4. Produk Lebihview
The Voltcraft FSP-1243 features a robust metal casing and a clear front panel for easy operation.
Rajah 1: Depan view of the Voltcraft FSP-1243 power supply, showing the output terminals, power switch, and ammeter.
Komponen Panel Depan:
- Terminal Keluaran: Red (+) and Black (-) terminals for connecting your load. These are 4mm screwable outputs.
- Ammeter: Displays the current drawn by the connected load in Amperes (A).
- Suis kuasa: Toggles the power supply ON (I) or OFF (0).
Figure 2: Close-up of the front panel, highlighting the output terminals and the analog ammeter.
5. Persediaan
- penempatan: Place the power supply on a stable, level surface. Ensure there is sufficient space around the unit for proper ventilation. Do not block the ventilation grilles.
- Sambungan Kuasa: Connect the supplied power cord to the AC input socket on the rear of the power supply and then to a suitable mains outlet (100-240V AC, 50/60Hz).
- Muatkan Sambungan: With the power supply turned OFF (power switch in '0' position), connect your load to the output terminals. Connect the positive (+) terminal of your load to the red (+) output terminal of the power supply, and the negative (-) terminal of your load to the black (-) output terminal. Ensure connections are secure.
6. Arahan Operasi
- Hidupkan kuasa: After connecting your load, switch the power supply ON by pressing the power switch to the 'I' position. The unit will provide a fixed 24 V/DC output.
- Monitor Current: Observe the ammeter to monitor the current drawn by your connected load. Ensure the current does not exceed the maximum rated output of 3 A.
- Matikan: To disconnect the load or stop operation, switch the power supply OFF by pressing the power switch to the '0' position. Then, safely disconnect your load.
7. Penyelenggaraan
- Pembersihan: Disconnect the power supply from the mains before cleaning. Use a soft, dry cloth to clean the exterior. Do not use abrasive cleaners or solvents.
- Pengudaraan: Regularly check that the ventilation grilles are free from dust and obstructions to ensure proper airflow and prevent overheating.
- Storan: Apabila tidak digunakan untuk tempoh yang lama, simpan bekalan kuasa di tempat yang sejuk dan kering, jauh daripada cahaya matahari langsung dan suhu yang melampau.
8. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| No power when switched ON | Power cord not connected, mains outlet faulty, internal fuse blown. | Check power cord connection. Test mains outlet with another device. If fuse is suspected, contact qualified service personnel. |
| Tiada keluaran voltage/semasa | Load not connected correctly, load is open circuit, internal fault. | Verify load connections. Check the load for continuity. If problem persists, contact support. |
| Ammeter shows 0 A with load connected | Load is not drawing current, load is open circuit, ammeter fault. | Ensure the load is operational and drawing current. Check load connections. |
| Unit terlalu panas | Blocked ventilation, excessive load. | Ensure ventilation grilles are clear. Reduce the load if it exceeds specifications. |
If you encounter issues not listed here or if the problem persists after attempting the suggested solutions, please contact Voltcraft customer support.
9. Spesifikasi
| Ciri | Spesifikasi |
|---|---|
| Jenama | KERA VOLTCRAFT |
| Nombor Model | FSP-1243 |
| Keluaran Voltage | 24 V/DC (fixed) |
| Arus Keluaran | 3 A (maksimum) |
| Kuasa Keluaran | 72 W |
| Bilangan Keluaran | 1 |
| Input Voltage | 100-240 V AC (typical, check product label for exact range) |
| Ciri Khas | Logam teguh casing, 4mm screwable output terminals, Electronically stabilized |
| Kaedah Penyejukan | Udara |
| Dimensi (L x W x H) | 25 x 14.5 x 11.3 cm |
| Berat badan | 3.4 Grams (Note: This weight seems unusually low for a power supply of this size and power. Please verify with product label.) |
10. Waranti dan Sokongan
Voltcraft products are designed for reliability and performance. For warranty information, please refer to the documentation provided with your purchase or visit the official Voltcraft website. For technical support, troubleshooting assistance, or spare parts availability, please contact Voltcraft customer service.
