1. Pengenalan
Thank you for choosing the VOLTCRAFT MF-100 Material Moisture Indicator. This device is designed for reliable and non-destructive measurement of moisture in various building materials, including walls, ceilings, and floors. It helps detect harmful moisture that can lead to mold formation, preserving the structural integrity of your property. This manual provides essential information for the safe and efficient operation of your device.
2. Arahan Keselamatan
Please read these safety instructions carefully before using the device to prevent injury or damage. Keep this manual for future reference.
- Keselamatan Umum: This device is intended for measuring material moisture. Do not use it for purposes other than those described in this manual.
- Keselamatan Elektrik: The device is battery-operated. Ensure batteries are inserted correctly. Do not attempt to measure live electrical components.
- Keadaan Persekitaran: Use the device in dry conditions. Avoid exposure to extreme temperatures, direct sunlight, high humidity, or corrosive environments.
- Penyelenggaraan: Jangan cuba membuka atau mengubah suai peranti ini. Pembaikan hanya boleh dilakukan oleh kakitangan yang berkelayakan.
- Pembersihan: Bersihkan peranti dengan kain kering dan lembut. Jangan gunakan pembersih atau pelarut yang melelas.
- Pelupusan: Buang bateri dan peranti mengikut peraturan tempatan.
3. Produk Lebihview
The VOLTCRAFT MF-100 is a compact, handheld material moisture indicator. Key components include the measurement probe, LCD display, and control buttons.
This image shows the front of the VOLTCRAFT MF-100, highlighting its LCD display, power button, and the spherical measurement probe extending from the top. The display shows "HOLD", "DRY", "MAX", "MIN" indicators, and numerical readings.
Bersudut view of the VOLTCRAFT MF-100, providing a better perspective of the ergonomic design and the spherical measurement probe. The display shows numerical readings and function indicators.
3.1. Komponen
- Spherical Measurement Probe: Used for non-destructive contact with the material surface.
- Paparan LCD: Shows moisture readings, MIN/MAX values, and function indicators.
- Butang Kuasa: Menghidupkan dan mematikan peranti.
- Butang Fungsi: (e.g., MIN/MAX, HOLD) for specific measurement modes.
- Petak Bateri: Located at the rear of the device.
3.2. Penunjuk Paparan
- Main Reading: Displays the current moisture value.
- MIN: Shows the minimum moisture value recorded during a measurement session.
- MAKS: Shows the maximum moisture value recorded during a measurement session.
- DIBERI: Indicates that the current reading is frozen on the display.
- KERING: May indicate a low moisture level or a specific measurement mode.
- Penunjuk Bateri: Menunjukkan baki hayat bateri.
4. Persediaan
4.1. Pemasangan Bateri
The VOLTCRAFT MF-100 requires 3 AAA batteries for operation.
- Cari penutup petak bateri di bahagian belakang peranti.
- Luncurkan atau buka klip penutup untuk membuka petak.
- Masukkan 3 bateri AAA, pastikan kekutuban (+/-) betul seperti yang ditunjukkan di dalam petak.
- Gantikan penutup petak bateri dengan selamat.
Nota: Always use fresh batteries and remove them if the device will not be used for an extended period to prevent leakage.
5. Arahan Operasi
5.1. Menghidupkan/Mematikan
- Untuk menghidupkan peranti, tekan butang Butang kuasa (usually marked with ⑂). The display will illuminate and show an initial reading, often 0.0 in air.
- Untuk mematikan peranti, tekan dan tahan butang Butang kuasa for a few seconds until the display turns off. The device may also have an auto-off function to conserve battery.
5.2. Performing a Non-Destructive Measurement
The MF-100 uses a non-destructive method, meaning it does not require piercing the material.
- Pastikan peranti dihidupkan.
- Place the spherical measurement probe flat against the surface of the material you wish to measure. Ensure full contact between the probe and the surface.
- The display will show the current moisture reading. Move the device slowly across the surface to identify areas with varying moisture levels.
- The reading represents the relative moisture content of the material. Refer to material-specific guidelines or experience for interpretation.
This image displays the VOLTCRAFT MF-100 showing a "0.0" reading, indicating a very low or no moisture content, typically seen when the device is in the air or on a completely dry surface.
The VOLTCRAFT MF-100 is shown displaying a numerical moisture reading (e.g., 14.5), along with MIN and MAX values, indicating an active measurement of moisture in a material.
5.3. Using MIN/MAX Function
The MIN/MAX function allows you to track the lowest and highest moisture values detected during a continuous measurement session.
- While measuring, the device automatically updates the MIN and MAX values on the display.
- This is particularly useful when scanning large areas or when the display is not easily visible during the measurement process.
- The device may feature an acoustic alarm that activates when a predefined moisture threshold (often related to MAX) is exceeded. Consult the device's specific button layout for activating/deactivating this feature if available.
5.4. Menggunakan Fungsi HOLD
The HOLD function freezes the current measurement reading on the display, allowing you to record or analyze it without the value changing.
- Semasa pengukuran, tekan butang Butang HOLD (if present, or a multi-function button). The "HOLD" indicator will appear on the display.
- The displayed value will remain fixed until you press the Butang HOLD again to release it, or until the device automatically exits HOLD mode.
6. Penyelenggaraan dan Penjagaan
- Pembersihan: Wipe the device exterior with a soft, dry, lint-free cloth. Do not use abrasive cleaners, solvents, or immerse the device in water.
- Storan: Simpan peranti di tempat yang sejuk dan kering, jauh dari cahaya matahari langsung dan suhu yang melampau. Jika menyimpan untuk tempoh yang lama, keluarkan bateri.
- Penggantian Bateri: Gantikan bateri apabila penunjuk bateri rendah muncul pada paparan untuk memastikan bacaan yang tepat.
7. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Peranti tidak dihidupkan. | Bateri mati atau salah dimasukkan. | Periksa polariti bateri. Gantikan dengan bateri AAA baharu. |
| Bacaan yang tidak tepat atau turun naik. | Poor contact with surface; device not calibrated; extreme environmental conditions. | Ensure full contact of the probe. Allow device to stabilize in new environment. If issues persist, contact support. |
| Display shows "HOLD" and doesn't update. | HOLD function is active. | Press the HOLD button again to deactivate the function. |
| Acoustic alarm sounds frequently. | High moisture detected; alarm threshold set too low. | Investigate the measured area for high moisture. Adjust alarm settings if possible (refer to specific device instructions). |
8. Spesifikasi
- model: VOLTCRAFT MF-100
- Prinsip Pengukuran: Non-destructive, capacitive
- Bekalan Kuasa: 3 x bateri AAA
- Dimensi (L x W x H): 3 x 6 x 24 cm (kira-kira 1.2 x 2.4 x 9.4 inci)
- Berat: 220 gram (lebih kurang 0.49 paun)
- ciri-ciri: MIN/MAX function, HOLD function, Acoustic alarm (if applicable)
9. Waranti dan Sokongan
The VOLTCRAFT MF-100 comes with a 1-year availability of spare parts, indicating support for the product. For warranty claims, technical assistance, or spare parts inquiries, please contact your retailer or the VOLTCRAFT customer service department. Keep your proof of purchase for warranty validation.
For further information, you may visit the official VOLTCRAFT webtapak atau hubungi saluran sokongan mereka.