Intermatic EI600WC Decorator Digital In-Wall 7-Day Astronomic Timer Instruction Manual

1. Pengenalan

This manual provides detailed instructions for the installation, programming, operation, and maintenance of your Intermatic EI600WC Decorator Digital In-Wall 7-Day Astronomic Timer. This device is designed to provide automatic control of lighting and other electrical loads, enhancing energy efficiency, security, and convenience through its advanced scheduling features.

2. Maklumat Keselamatan

AMARAN: Risk of electric shock. Improper installation can result in serious injury or death.

• Sentiasa putuskan kuasa pada pemutus litar atau kotak fius sebelum memasang atau menservis pemasa.
• Installation should be performed by a qualified electrician or in accordance with all local and national electrical codes.
• Do not use this timer with loads exceeding its specified ratings (15 Amps, 120-277 VAC).
• Pastikan semua sambungan wayar selamat dan terlindung dengan betul.
• Peranti ini bertujuan untuk kegunaan dalaman sahaja.

3. Produk Lebihview dan Ciri

The Intermatic EI600WC is a sophisticated digital in-wall timer designed for versatile control of electrical loads. Key features include:

• Astronomic Feature: Automatically adjusts ON/OFF times based on local sunset and sunrise, eliminating the need for manual seasonal adjustments.
• Pengaturcaraan 7 Hari: Offers up to 40 ON/OFF operations per week, allowing for unique schedules each day.
• Automatic Daylight Saving Time (DST) Adjustment: Automatically updates for DST changes.
• No Neutral Wire Required: Simplifies installation in older homes or where a neutral wire is not readily available.
• 3-Way Switch Compatible: Can be used in both single-pole and 3-way (multi-way) switch configurations.
• Bateri tambahan: Maintains timekeeping and program settings for up to three years during power outages using an included CR2 lithium battery.
• Memori Tidak Meruap: Stores all user program selections permanently.
• Penunjuk Bateri Rendah: Makluman apabila penggantian bateri diperlukan.
• Isolated Single Pole Single Throw Switch: Allows the timer to switch various load types.
• Kekerapan Operasi: 50/60Hz.
• Voltage Keserasian: 120-277 VAC, up to 15 Amps.

Rajah 3.1: Depan view of the Intermatic EI600WC timer installed in a standard decorator wall plate.

Rajah 3.2: Depan view of the Intermatic EI600WC timer module, showing the digital display and the cover for programming buttons.

Rajah 3.3: Depan view of the Intermatic EI600WC timer with the lower cover opened, revealing the 'mode', 'on/off', '+', and '-' programming buttons.

4. Pemasangan

Before beginning installation, ensure power is disconnected at the circuit breaker. This timer is designed for single-pole or 3-way switch applications and does not require a neutral wire connection.

4.1. Alatan Diperlukan

• Pemutar skru (Phillips dan kepala rata)
• Strippers wayar
• Pita elektrik
• Voltage penguji

4.2. Arahan Pendawaian

Refer to the wiring diagrams below and on the product label for correct connections. The EI600WC is a 3-wire design, compatible with both single-pole and 3-way switch setups.

Rajah 4.1: Excerpt from the instruction manual showing wiring diagrams and programming steps.

4.2.1. Single-Pole Switch Installation

1. MATIKAN kuasa pada pemutus litar.
2. Tanggalkan suis dinding sedia ada.
3. Identify the two wires connected to the switch. One is the KAWAT HITAM from the power source, and the other is the KAWAT MERAH kepada beban.
4. Sambungkan KAWAT HITAM from the wall to the timer's KAWAT HITAM.
5. Sambungkan KAWAT MERAH from the wall to the timer's KAWAT MERAH.
6. Connect the timer's KAWAT HIJAU to the grounding screw in the box.
7. Mount the timer into the wall box and install the wall plate.
8. Pulihkan kuasa.

4.2.2. 3-Way Switch Installation

For 3-way applications, the EI600WC replaces one of the existing 3-way switches. The other 3-way switch will be replaced with a standard single-pole switch or remain as a 3-way switch if desired, but only one timer can control the load.

1. MATIKAN kuasa pada pemutus litar.
2. Remove both existing 3-way switches.
3. At the location where the EI600WC will be installed:
   • Kenal pasti COMMON WIRE (usually darker or marked) from the power source or load.
   • Connect the timer's KAWAT HITAM kepada COMMON WIRE dari dinding.
   • Connect the timer's KAWAT MERAH to one of the remaining traveler wires.
   • Cap the other traveler wire with a wire nut; it will not be used by the timer.
   • Connect the timer's KAWAT HIJAU to the grounding screw in the box.
4. At the other 3-way switch location:
   • Sambungkan COMMON WIRE to the traveler wire that was connected to the timer's KAWAT MERAH.
   • Connect the other two wires together with a wire nut (these are the remaining traveler and the unused common from the original 3-way switch).
   • Install a standard single-pole switch or a 3-way switch wired as a single-pole switch.
5. Mount the timer and the other switch into their respective wall boxes and install wall plates.
6. Pulihkan kuasa.

Nota: If the timer clock and the load lamp operate when the timer is removed from the wall box, but the timer does not operate the load lamp when installed, then the inverter wires 'A' and 'B' are reversed. Reverse the timer's 'A' and 'B' wires and retest.

5. Persediaan dan Konfigurasi Awal

After installation and power restoration, the timer display will show "12:00" and "PM". The battery indicator will flash if the battery needs replacement. Open the lower cover to access the programming buttons.

5.1. Setting Current Time and Date

1. Tekan ke MODE button until "SET TIME" appears on the display.
2. Gunakan + dan - butang untuk melaraskan jam. Tekan MODE untuk mengesahkan.
3. Adjust minutes using + dan -. Tekan MODE untuk mengesahkan.
4. Adjust the current day of the week (1=Monday, 7=Sunday). Press MODE untuk mengesahkan.
5. Adjust the current year. Press MODE untuk mengesahkan.
6. Adjust the current month. Press MODE untuk mengesahkan.
7. Adjust the current day of the month. Press MODE to exit "SET TIME".

5.2. Setting Geographic Location (Latitude/Longitude)

This setting is crucial for the astronomic feature to function accurately. You will need your location's latitude and longitude. Many online resources can provide this information.

1. Tekan ke MODE button until "SET LAT" appears.
2. Gunakan + dan - buttons to adjust the latitude value. The display shows two digits, representing degrees. For example, "42" means 42.0 degrees. Press MODE untuk mengesahkan.
3. "SET LONG" will appear. Use + dan - to adjust the longitude value. Press MODE untuk mengesahkan dan keluar.

Nota: The timer assumes the right-most digit is after a decimal point for latitude and longitude. For example, if your latitude is 42.5, you would enter "425". If it's 42.0, you would enter "420".

5.3. Pelarasan Daylight Saving Time (DST).

The timer can automatically adjust for Daylight Saving Time. This feature is typically enabled by default.

1. Tekan ke MODE button until "DST" appears.
2. Gunakan + or - button to toggle between "ON" (automatic DST adjustment) and "OFF".
3. Tekan MODE untuk mengesahkan dan keluar.

6. Arahan Pengendalian dan Pengaturcaraan

The EI600WC allows for flexible programming with up to 40 ON/OFF operations per week. Programs can be set for specific times or utilize the astronomic feature.

6.1. Setting Initial ON/OFF Times

You can set up to 20 ON/OFF programs. Each program can be assigned to specific days or all days of the week.

1. Tekan MODE until "SET PROG" appears. The display will show "PGM 1 ON".
2. guna + or - to select the desired program number (1-20). Press MODE.
3. The display will show "ON". Use + or - to set the ON time. You can select a specific time (e.g., 6:00 PM) or "DUSK" for astronomic ON. Press MODE.
4. Select the days for this ON event (e.g., "ALL" for all days, "WK" for weekdays, "WE" for weekends, or individual days). Press MODE.
5. The display will show "OFF". Use + or - to set the OFF time. You can select a specific time (e.g., 11:00 PM) or "DAWN" for astronomic OFF. Press MODE.
6. Select the days for this OFF event (must match the ON event days). Press MODE untuk menyimpan program.
7. Repeat for additional programs. Press MODE repeatedly to exit programming mode.

6.2. Revising an ON or OFF Setting

1. Tekan MODE until "SET PROG" appears.
2. guna + or - to select the program number you wish to revise. Press MODE.
3. The display will show the current ON time. Use + or - to change it. Press MODE.
4. The display will show the current OFF time. Use + or - to change it. Press MODE untuk menyimpan.

6.3. Deleting an ON or OFF Setting

1. Tekan MODE until "SET PROG" appears.
2. guna + or - to select the program number you wish to delete. Press MODE.
3. When "ON" is displayed, press HIDUP/MATI button. "SKIP" will appear, indicating the ON event is deleted. Press MODE.
4. When "OFF" is displayed, press HIDUP/MATI button. "SKIP" will appear, indicating the OFF event is deleted. Press MODE untuk menyimpan.

6.4. Operating Modes: AUTO, RANDOM, MANUAL

The timer has three operating modes, selected by pressing the HIDUP/MATI button when the cover is closed.

• AUTO: The timer operates according to the programmed ON/OFF times. This is the default mode.
• RANDOM: The timer will turn ON and OFF at random times, +/- 20 minutes from the programmed times. This feature can enhance security by simulating occupancy.
• MANUAL: The load is turned ON or OFF manually by pressing the HIDUP/MATI button. The timer will remain in this state until the next programmed event, at which point it will revert to AUTO mode.

7. Penyelenggaraan

7.1. Penggantian Bateri

The EI600WC timer uses one CR2 lithium battery (included) for timekeeping and program retention during power outages. The battery typically lasts up to three years. A low battery indicator will appear on the display when replacement is needed.

1. Open the lower cover of the timer to access the battery compartment.
2. Keluarkan bateri CR2 lama dengan berhati-hati.
3. Insert a new CR2 lithium battery, ensuring correct polarity.
4. Tutup penutup petak bateri.

Nota: Replacing the battery does not erase programmed settings due to non-volatile memory.

8. Penyelesaian masalah

9. Spesifikasi

• model: EI600WC
• Jenama: Intermatik
• Voltage: 120-277 VAC
• Amppemadaman: Sehingga 15 Amps
• Kekerapan: 50/60 Hz
• Jenis Suis: Tiang tunggal atau 3 hala
• Jenis Pemasangan: Wall (in-wall)
• Dimensi (H x W x D): 4.12" x 1.81" x 1.75"
• Bahan: Logam, Plastik
• warna: putih
• Bateri: 1 x CR2 Lithium (included)
• Hayat Bateri: Sehingga 3 tahun
• Suhu Operasi: -4°F hingga 122°F (-20°C hingga 50°C)
• Pensijilan: CSA (Kanada dan AS)
• UPC: 078275101418

Rajah 9.1: Dimensional drawing of the Intermatic EI600WC timer, showing height (4.12"), width (1.81"), and depth (1.75").

10. Waranti dan Sokongan

10.1. Maklumat Waranti

This Intermatic product is covered by a warranty that typically involves product replacement for defects. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Intermatic webtapak.

10.2. Sokongan Pelanggan

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Intermatic customer support. You can find contact information on the official Intermatic webtapak atau melalui peruncit produk anda.