Theater Solutions SUB8S Slim Powered Subwoofer

pengenalan

Terima kasih kerana membeliasing the Theater Solutions SUB8S Slim Powered Subwoofer. This manual provides comprehensive instructions for the safe and efficient installation, operation, and maintenance of your new subwoofer. Please read this manual thoroughly before use and retain it for future reference.

Arahan Keselamatan Penting

• Keselamatan Elektrik: Do not expose this appliance to rain or moisture. Do not remove the cover. Refer all servicing to qualified service personnel.
• Sumber Kuasa: Connect the subwoofer only to a 110V, 60Hz AC power outlet. Ensure the power cord is not pinched or walked on.
• Pengudaraan: Ensure adequate ventilation around the subwoofer. Do not block any ventilation openings.
• penempatan: Avoid placing the subwoofer near heat sources, direct sunlight, or in areas with excessive vibration.
• Pembersihan: Unplug the subwoofer from the power outlet before cleaning. Use a soft, dry cloth. Do not use liquid cleaners or aerosol cleaners.

Kandungan Pakej

Sahkan bahawa semua item yang disenaraikan di bawah disertakan dalam pakej anda:

• 1 x Theater Solutions SUB8S Powered Subwoofer Speaker
• 1 x Dual RCA 9 Foot Cable
• 1 x RCA "Y" Adapter
• Optional Stand Mounts (feet)
• Optional Wall Mount and Hardware
• Manual Arahan (dokumen ini)

Produk Selesaiview: Rear Panel Controls and Connections

The rear panel of the SUB8S subwoofer features all necessary controls and connection ports for integration into your home audio system.

1. Suis Fasa (0°/180°): Adjusts the phase of the subwoofer output relative to your main speakers.
2. Penunjuk Kuasa: Illuminates when the subwoofer is powered on.
3. On/Auto Off Switch: Selects between continuous power (On) or automatic power management (Auto Off). In Auto Off mode, the subwoofer enters standby after two minutes of no signal.
4. Gain Control (Min/Max): Melaraskan tahap kelantangan keseluruhan subwoofer.
5. Crossover Control (40Hz/150Hz): Sets the upper frequency limit for the subwoofer. Frequencies above this setting will be sent to your main speakers.
6. Line In (L/R RCA): Low-level input for connecting to a receiver's dedicated subwoofer output (LFE or Sub Out).
7. Hi Level Input (From Amplebih hidup): High-level input for connecting directly to the speaker outputs of an amplifier or receiver that lacks a dedicated subwoofer output.
8. Hi Level Output (To Speakers): High-level output for passing the signal from the amplifier to your main speakers when using the high-level input.
9. Pemegang fius: Contains the main power fuse. Replace only with the specified type.
10. Salur Masuk Kord Kuasa: Connects the subwoofer to the AC power supply.

Persediaan dan Pemasangan

1. Pilihan Penempatan

The slim design of the SUB8S allows for versatile placement. Consider the following options:

• Di bawah Perabot: The subwoofer's 4.75-inch height allows it to slide under most sofas, beds, or entertainment centers.
• Pemasangan Dinding: Use the included wall mount bracket to secure the subwoofer to a wall. Ensure the wall can support the subwoofer's weight (approximately 22 lbs).
• Lantai Berdiri: Attach the included stand mounts (feet) for floor placement.

2. Menyambung Subwufer

Sebelum membuat sebarang sambungan, pastikan semua peralatan audio dimatikan dan dicabut daripada soket kuasa.

Option A: Using a Dedicated Subwoofer Output (RCA Line In)

This is the recommended connection method if your receiver or amplifier has a dedicated "Subwoofer Out" or "LFE Out" RCA jack.

1. Connect one end of the included RCA cable (or your own single RCA cable) to the "Subwoofer Out" or "LFE Out" jack on your receiver.
2. Connect the other end of the RCA cable to the "Line In" (L or R) jack on the SUB8S subwoofer. If using a single RCA cable from your receiver, you can use the included "Y" adapter to connect to both L and R inputs on the subwoofer for potentially higher signal level, though a single connection to either L or R is often sufficient.

Option B: Using High-Level Inputs (Speaker Wire)

Use this method if your receiver or amplifier does not have a dedicated subwoofer output.

1. Sambungkan wayar pembesar suara dari anda amplifier's main left and right speaker outputs to the "Hi Level Input" terminals on the SUB8S subwoofer. Match positive (+) to positive (+) and negative (-) to negative (-).
2. Connect your main left and right speakers to the "Hi Level Output" terminals on the SUB8S subwoofer. Again, match polarity.

3. Sambungan Kuasa

Once audio connections are made, connect the subwoofer's power cord to a standard 110V AC wall outlet.

Operasi

1. Menghidupkan/Mematikan

• Set the "On/Auto Off" switch to "On" for continuous power. The power indicator will illuminate.
• Set the "On/Auto Off" switch to "Auto Off" for automatic power management. The subwoofer will power on when an audio signal is detected and enter standby mode after approximately two minutes of no signal.

2. Melaraskan Kawalan

Fine-tune the subwoofer's performance using the rear panel controls:

• Kawalan Keuntungan: Start with the gain control at its minimum setting. Gradually increase it until the subwoofer's output blends seamlessly with your main speakers. Avoid setting it too high, which can result in boomy or unnatural bass.
• Kawalan Crossover: This control sets the highest frequency the subwoofer will reproduce. A good starting point is typically around 80Hz-100Hz, but this depends on the low-frequency capabilities of your main speakers. If your main speakers are small, set the crossover higher (e.g., 100Hz-120Hz). If they are larger with good bass response, set it lower (e.g., 60Hz-80Hz). Adjust by ear for the smoothest transition between the subwoofer and main speakers.
• Suis Fasa (0°/180°): Experiment with both 0° and 180° settings. Choose the setting that provides the most impactful and coherent bass response at your listening position. This often involves listening to music with strong bass and switching between the two settings to hear which sounds fuller and more integrated.

Penyelenggaraan

Proper maintenance ensures the longevity and performance of your subwoofer.

• Pembersihan: Dust the cabinet regularly with a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents.
• Pengudaraan: Ensure that the subwoofer's ventilation openings are not obstructed by dust or debris.
• Kord Kuasa: Periodically inspect the power cord for any damage. If damaged, discontinue use and contact qualified service personnel.

Menyelesaikan masalah

Spesifikasi

Waranti dan Sokongan

This Theater Solutions SUB8S subwoofer comes with a limited warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or contact Theater Solutions customer support.

For technical assistance or support inquiries, please visit the official Theater Solutions weblaman web atau hubungi jabatan khidmat pelanggan mereka. Maklumat hubungan biasanya terdapat pada pembungkusan produk atau alamat pengilang webtapak.