pengenalan
This manual provides essential information for the safe and effective use of your Skil Electric Screwdriver F 015 243 6AC. Please read these instructions carefully before operating the tool and keep them for future reference.
Arahan Keselamatan
Sentiasa ikuti langkah berjaga-jaga keselamatan asas untuk mengurangkan risiko kebakaran, kejutan elektrik dan kecederaan diri.
- Keselamatan Kawasan Kerja: Pastikan kawasan kerja anda bersih dan terang. Kawasan bersepah atau gelap mengundang kemalangan. Jangan kendalikan alatan kuasa dalam atmosfera yang mudah meletup, seperti di hadapan cecair mudah terbakar, gas atau habuk.
- Keselamatan Elektrik: Elakkan sentuhan badan dengan permukaan yang dibumikan atau dibumikan seperti paip, radiator, dapur dan peti sejuk. Jangan dedahkan alat kuasa kepada hujan atau keadaan basah.
- Keselamatan Diri: Sentiasa berwaspada, perhatikan perkara yang anda lakukan dan gunakan akal semasa mengendalikan alat kuasa. Jangan gunakan alat kuasa semasa anda letih atau di bawah pengaruh dadah, alkohol atau ubat.
- Penggunaan dan Penjagaan Alat: Jangan paksa alat kuasa. Gunakan alat kuasa yang betul untuk aplikasi anda. Putuskan sambungan palam daripada sumber kuasa dan/atau pek bateri daripada alat kuasa sebelum membuat sebarang pelarasan, menukar aksesori atau menyimpan alatan kuasa.
- Penggunaan dan Penjagaan Alat Bateri: Isi semula hanya dengan pengecas yang ditentukan oleh pengilang. Gunakan alatan kuasa hanya dengan pek bateri yang ditetapkan secara khusus.
Produk Selesaiview
The Skil Electric Screwdriver F 015 243 6AC is a compact and versatile tool designed for various screwing and unscrewing tasks. It features an automatic spindle lock for manual operation and a comfortable soft grip.
Figure 1: Skil Electric Screwdriver F 015 243 6AC in operation, demonstrating its use for tightening a screw on a cabinet hinge. The tool is held comfortably in hand, showcasinreka bentuk ergonomiknya.
Ciri-ciri Utama:
- Automatic Spindle Lock for manual unscrewing/tightening
- Soft Grip for comfortable operation
- Forward and Reverse Trigger
- Integrated Lithium-Ion Battery
- Comes with 35 accessories
Persediaan
1. Mengecas Bateri:
The screwdriver is powered by an integrated Lithium-Ion battery. Before first use, fully charge the battery. The charging time is approximately 5 hours.
- Connect the charger to a standard 230-240V, 50-60Hz power outlet.
- Connect the charging cable to the screwdriver's charging port.
- Allow the battery to charge for the recommended 5 hours.
- Putuskan sambungan pengecas setelah pengecasan selesai.
Nota: This model may not have a charging indicator. Follow the recommended charging time.
2. Memasang Aksesori:
Your screwdriver comes with 35 accessories, including various bits. The hexagonal drive size is 6.35 mm.
- Pastikan pemutar skru dimatikan.
- Select the appropriate bit for your task.
- Insert the bit firmly into the hexagonal drive until it is securely seated.
- Untuk menanggalkannya, tarik terus mata gergaji itu keluar.
Arahan Operasi
1. Turning On/Off and Direction Control:
The screwdriver features a forward and reverse trigger for easy operation.
- To activate the screwdriver, press the trigger.
- To select forward rotation (for tightening screws), push the direction switch to the left.
- To select reverse rotation (for unscrewing), push the direction switch to the right.
- Release the trigger to turn off the screwdriver.
2. Screwing and Unscrewing:
The automatic spindle lock allows for manual assistance when needed.
- Select the correct bit and attach it securely.
- Letakkan mata bor pada kepala skru.
- For tightening, select forward rotation and gently press the trigger. Apply steady pressure.
- For unscrewing, select reverse rotation and gently press the trigger.
- If a screw is too tight or too loose for powered operation, the automatic spindle lock allows you to manually turn the screwdriver to apply additional torque or loosen the screw.
The no-load speed is 200 RPM, and the hard torque joint is 7 Nm.
Penyelenggaraan
1. Pembersihan:
- Always disconnect the charger before cleaning.
- Pastikan bukaan pengudaraan bersih untuk mengelakkan terlalu panas.
- Lap alat dengan lembut, damp kain. Jangan gunakan bahan kimia yang keras atau pembersih yang kasar.
2. Penjagaan Bateri:
- Store the screwdriver in a cool, dry place when not in use.
- Avoid storing the tool with a completely discharged battery for extended periods.
- For optimal battery life, recharge the battery before it is completely depleted and avoid overcharging.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Pemutar skru tidak boleh dihidupkan. | Bateri dinyahcas. | Cas bateri selama 5 jam. |
| Pemutar skru kekurangan kuasa. | Battery is low or not fully charged. | Cas semula bateri. Pastikan ia dicas sepenuhnya sebelum digunakan. |
| Mata gerudi tergelincir dari kepala skru. | Incorrect bit size or worn bit. Insufficient pressure. | Use the correct bit size. Replace worn bits. Apply firm, steady pressure. |
| Alat menjadi terlalu panas. | Bukaan pengudaraan yang disekat. Penggunaan berat berterusan. | Clean ventilation openings. Allow the tool to cool down during prolonged use. |
Spesifikasi
| Ciri | Perincian |
|---|---|
| Jenama | Kemahiran |
| Nombor Model | F 015 243 6AC |
| Sumber Kuasa | Dikuasakan Bateri |
| Jenis Bateri | Litium-Ion |
| Voltage | 3.6 Volt |
| Kelajuan Tanpa Beban | 200 RPM |
| Hard Torque Joint | 7 Nm |
| Hexagonal Drive Size | 6.35 mm |
| Masa Mengecas | 5 jam |
| Berat badan | 798 gram (lebih kurang 1.76 paun) |
| Komponen yang Disertakan | Screwdriver, 35 accessories |
| Ciri Khas | Putaran terbalik |
| Tahap Kebisingan | 70 dB |
| Tahap Getaran | Less than 2.5 m/s² |
Waranti dan Sokongan
For warranty information and customer support, please refer to the documentation provided with your purchase or contact Skil customer service directly. Keep your proof of purchase for any warranty claims.
