pengenalan
This manual provides detailed instructions for the installation, operation, and maintenance of your Lanzar VCT2610 2-Channel 6000 Watt MOSFET Car Audio Amplifier. Please read this manual thoroughly before attempting installation or operation to ensure proper use and to prevent damage to the unit or your vehicle's audio system. The Lanzar VCT2610 amplifier is designed to deliver high-quality audio performance for your car stereo system.
Maklumat Keselamatan
- Pemasangan Profesional Disyorkan: Pemasangan komponen audio kereta boleh menjadi rumit. Jika anda tidak pasti tentang mana-mana bahagian proses pemasangan, dapatkan bantuan daripada pemasang profesional yang berkelayakan.
- Putuskan Sambungan Bateri: Always disconnect the vehicle's negative battery terminal before starting any electrical work to prevent short circuits and electrical shock.
- Pendawaian yang betul: Ensure all wiring is correctly connected and insulated to prevent short circuits, overheating, and potential fire hazards. Use appropriate gauge wires for power and ground connections.
- Pengudaraan: Lekapkan amplifier in a location that allows for adequate air circulation to prevent overheating. Avoid mounting in enclosed spaces without ventilation.
- Perlindungan fius: The amplifier is equipped with internal fuses. Ensure external fuse protection is also used on the main power wire near the battery.
- Elakkan Kelembapan: Jangan dedahkan amplifier to moisture or water.
- Pemasangan selamat: Pasang dengan selamat amplifier to prevent it from becoming a projectile in the event of a sudden stop or accident.
Apa yang ada dalam Kotak
The Lanzar VCT2610 amplifier package includes the following items:
- 1 x Lanzar VCT2610 2-Channel Car Stereo Amplebih hidup
Image: The Lanzar VCT2610 amplifier shown with its packaging, highlighting its dimensions (21.97 inches length, 10.63 inches width) and confirming the inclusion of the 2-Channel Car Stereo Amplebih hidup.
Ciri-ciri
The Lanzar VCT2610 amplifier incorporates several features designed for optimal audio performance and reliability:
- Output Kuasa Tinggi: Delivers 3000W x 2 at 4 ohms or 6000W x 1 bridged at 2 ohms for robust audio.
- Full Range Crossovers: Features low/high pass variable crossover for precise audio tuning.
- Bekalan Kuasa MOSFET: Utilizes Metal Oxide Semiconductor Field-Effect Transistors for efficient power delivery.
- Perlindungan Litar pintas: Equipped with 2x40 amp maxi type fuses to protect against thermal, overload, and short circuit conditions.
- Slim Size Design: Compact dimensions (10.63''W x 1.78''H x 21.97''L) for flexible installation.
- Silver-Plated RCA Ports: Ensures high conductivity and minimal signal loss.
- Fully Protected Circuitry: Integrated protection mechanisms for enhanced durability.
Persediaan dan Pemasangan
Careful installation is crucial for the performance and longevity of your amppenghawa dingin. Ikuti langkah-langkah ini untuk persediaan yang betul.
Memasang Amplebih hidup
Choose a mounting location that provides adequate ventilation and is protected from moisture. The slim design of the VCT2610 allows for versatile placement. Ensure the amplifier is securely fastened to a solid surface using the provided mounting hardware.
Image: The Lanzar VCT2610 amplifier installed in a vehicle's trunk, illustrating its compact and sturdy design for easy integration.
Sambungan Pendawaian
Refer to the diagrams below for proper wiring of power, ground, remote, and audio signals.
Image: Rear panel of the Lanzar VCT2610 amplifier, detailing the power supply terminals (GND, REM, +12V), dual 60A power fuses, and speaker output connections.
Terminal Bekalan Kuasa
- GND (Tanah): Connect this terminal to a clean, unpainted metal surface of the vehicle chassis. Ensure a strong, low-resistance connection.
- REM (Penghidupan Jauh): Sambungkan terminal ini ke output penghidupan jauh unit kepala anda. Wayar ini memberi isyarat kepada amplifier to turn on and off with your car's audio system.
- +12V (Kuasa): Connect this terminal directly to the positive terminal of your vehicle's battery. An inline fuse holder with an appropriate fuse (not included, but recommended in addition to the amplifier's internal fuses) should be installed within 18 inches of the battery.
Sambungan Pembesar Suara
Connect your speakers to the 'SPEAKER' terminals. Ensure correct polarity (+ to + and - to -) for optimal sound quality. The VCT2610 supports 2-channel stereo operation or can be bridged for mono output.
RCA Input and Line Output
Connect your head unit's RCA outputs to the 'INPUT' RCA jacks on the amplifier. The 'LINE OUT' RCA jacks provide an unamplified signal for connecting additional amppenyelamat dalam pelbagaiamppersediaan penguat.
Image: Top panel of the Lanzar VCT2610 amplifier, displaying the Low Level Input, Aux Line Outputs, Input Level Control, Sub Sonic Filter Switch, Crossover Mode Selector, Crossover Control, and Power LED.
Arahan Operasi
Sebaik sahaja amplifier is correctly installed and wired, you can adjust its settings for optimal audio performance.
Kawalan dan Penunjuk
- Input Aras Rendah (RCA): Connect your head unit's RCA pre-outs here.
- Aux Line Outputs (RCA): Provides a full-range signal for daisy-chaining to other amppenyelamat.
- Input Level Control (GAIN): Melaraskan sensitiviti input bagi amplifier to match the output level of your head unit. Start with the gain at minimum and slowly increase until desired volume is achieved without distortion.
- Sub Sonic Filter Switch: Engages a filter to remove extremely low frequencies that are inaudible and can waste ampkuasa penguat.
- Crossover Mode Selector (HPF/FULL/LPF):
- HPF (Penapis Lulus Tinggi): Allows frequencies above the set crossover point to pass through, typically used for full-range speakers.
- PENUH: Bypasses the crossover, allowing all frequencies to pass through.
- LPF (Penapis Lulus Rendah): Allows frequencies below the set crossover point to pass through, typically used for subwoofers.
- Crossover Control (FREQ): Adjusts the frequency point for the High Pass or Low Pass filter, depending on the Crossover Mode selected.
- Kawalan Boost Bass: Increases the bass output at a specific frequency. Use sparingly to avoid distortion.
- LED Kuasa (Hijau): Bercahaya apabila amplifier is powered on and operating normally.
- Protection LED (Red): Menerangi jika amplifier enters protection mode due to overheating, short circuit, or other fault conditions.
Penyelenggaraan
To ensure the longevity and optimal performance of your Lanzar VCT2610 amplifier, ikuti garis panduan penyelenggaraan mudah ini:
- Jaga kebersihan: Lap secara kerap amplifier's exterior with a soft, dry cloth to remove dust and dirt. Avoid using harsh chemicals or abrasive cleaners.
- Pastikan Pengudaraan: Periodically check that the ampSirip penyejuk lifier bebas daripada halangan bagi membolehkan pelesapan haba yang betul.
- Semak Sambungan: Occasionally inspect all power, ground, remote, and speaker connections to ensure they are secure and free from corrosion. Loose connections can lead to poor performance or damage.
- Pemeriksaan fius: Sekiranya amplifier stops working, check the internal fuses (2x40A maxi type) and any external fuses. Replace blown fuses only with fuses of the same type and rating.
Menyelesaikan masalah
Jika anda mengalami masalah dengan anda amplifier, rujuk panduan penyelesaian masalah berikut sebelum menghubungi sokongan.
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Tiada Kuasa / LED Kuasa Mati |
|
|
| LED Perlindungan Dihidupkan |
|
|
| Tiada Keluaran Bunyi |
|
|
| Bunyi Herot |
|
|
Spesifikasi
The following are the technical specifications for the Lanzar VCT2610 amplebih hidup:
- Nombor Model: VCT2610
- Bilangan Saluran: 2
- Kuasa Output: 3000 Watt RMS / 6000 Watt MAX
- Bekalan Minimum Voltage: 12 Volt
- Dimensi Item (L x W x H): 25.7 x 12.6 x 3.59 inci
- Berat Barang: 13.2 paun
- Bahan: logam
- Jenis Pemasangan: Lekapan Permukaan
- UPC: 068888897013
- Pengeluar: Bunyi Sekitar
- Spesifikasi Ditemui: FCC, IC
Waranti dan Sokongan
The Lanzar VCT2610 ampliifier dilengkapi dengan a Waranti 1 Tahun from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage caused by improper installation, accident, misuse, abuse, negligence, unauthorized modification, or normal wear and tear.
For technical support or warranty claims, please contact Lanzar customer service. Keep your proof of purchase for warranty validation.
