Produk Selesaiview
The Weiser GA531 T3 SMTK4 MS 6LR1 Troy Entry Knob is a bright brass finished door knob designed for entry doors, providing both security and aesthetic appeal. It features a SmartKey cylinder for enhanced security and easy rekeying.
Imej: Dari dekat view of the Weiser Troy Entry Knob, showcasing its bright brass finish and the keyhole of the SmartKey cylinder.
Ciri-ciri Utama
- Bright brass finish for a classic aesthetic.
- Equipped with a SmartKey cylinder, eliminating traditional pins and springs for enhanced security.
- Allows for easy rekeying in three simple steps using the included rekeying tool.
- Designed to fit standard doors with an adjustable backset of 2-3/8 inches or 2-3/4 inches.
- Part of the Weiser Welcome Home Series, ensuring quality and compatibility.
Kandungan Pakej
Sahkan bahawa semua komponen hadir sebelum memulakan pemasangan:
- Troy Entry Knob (Interior and Exterior halves)
- Mekanisme Selak
- Pukulan Pukulan
- Skru Pemasangan
- Rekeying Tool
- kunci
Panduan Pemasangan
This section provides general instructions for installing the Weiser Troy Entry Knob. For detailed visual guides, refer to the manufacturer's official installation videos or diagrams.
1. Sediakan Pintu
Ensure your door is properly bored for a standard door knob installation. The knob fits standard doors and has an adjustable bracket for 2-3/8'' or 2-3/4'' backsets.
2. Pasang Selak
Insert the latch into the edge bore hole of the door. Ensure the bevel of the latch bolt faces the door frame. Secure with screws.
3. Install the Knobs
Align the posts of the exterior knob with the holes in the latch. Slide the exterior knob into place. Then, align the interior knob and secure it to the exterior knob using the provided screws.
4. Pasang Plat Strike
On the door frame, align and install the strike plate where the latch bolt will engage when the door is closed. Secure with screws.
Rekeying the Lock (SmartKey Cylinder)
The SmartKey cylinder allows you to rekey your lock to a new key in three easy steps. This is useful if you lose a key or want to match your lock to other SmartKey locks.
- Insert your functioning key fully into the cylinder and turn it 90 degrees clockwise.
- Insert the SmartKey rekeying tool fully into the SmartKey hole. Apply firm pressure and remove the rekeying tool.
- Remove your functioning key. Insert your new key fully into the cylinder and turn it 180 degrees counter-clockwise. Your lock is now rekeyed.
Arahan Operasi
The Weiser Troy Entry Knob operates as a standard keyed entry knob. To lock the door from the exterior, use the key. To lock from the interior, rotate the turn-button on the interior knob. To unlock, use the key from the exterior or rotate the turn-button from the interior.
The SmartKey cylinder provides pick-resistance and bump-resistance for enhanced security.
Penjagaan dan Penyelenggaraan
To maintain the bright brass finish and ensure smooth operation of your Weiser Troy Entry Knob, follow these guidelines:
- Pembersihan: Clean the knob with a soft, damp kain. Elakkan pembersih, pelarut atau pengilat yang kasar yang boleh merosakkan kemasan.
- Pelinciran: Periodically apply a small amount of graphite lubricant or a silicone-based spray to the keyway to ensure smooth key insertion and turning. Do not use oil-based lubricants as they can attract dirt.
- Pemeriksaan: Periksa semua skru dan komponen secara berkala untuk memastikan ia ketat. Ketatkan sebarang skru yang longgar untuk mengelakkan goyangan atau kerosakan.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Kunci tidak berpusing atau sukar untuk dimasukkan. | Serpihan pada laluan kunci, kunci haus atau kekurangan pelinciran. | Clean keyway with compressed air. Lubricate with graphite. Try a new key if available. |
| Tombol longgar atau goyah. | Skru pemasangan longgar. | Ketatkan skru pelekap pada bahagian dalam tombol. |
| Latch bolt does not extend or retract smoothly. | Misalignment, debris, or worn latch. | Check for proper alignment of the latch and strike plate. Clean any debris. Lubricate the latch mechanism. |
| Tidak boleh memasukkan kunci semula. | Incorrect key insertion, rekeying tool not fully inserted, or wrong key. | Ensure functioning key is fully inserted and turned 90 degrees. Insert rekeying tool firmly and completely. Use the correct new key. |
Spesifikasi Produk
| Nombor Model | GA531 T3 SMTK4 MS 6LR1 |
| Jenama | Weiser |
| bahan | Tembaga |
| Warna/Selesai | Brass/Bright Brass (Polished) |
| Jenis Kunci | Key Lock (SmartKey Cylinder) |
| Adjustable Backset | 2-3/8 inches or 2-3/4 inches |
| Berat Barang | 1.25 paun (lebih kurang) |
| Dimensi Produk | 4.56 x 2.99 x 8.94 inci (lebih kurang) |
| Komponen yang Disertakan | Knob, Lock, Rekeying Tool |
| Ciri Khas | Easy to Install, Sturdy |
Waranti dan Sokongan
Weiser products are manufactured to the highest standards and are backed by a limited lifetime mechanical and finish warranty to the original residential user. For specific warranty details, claims, or technical support, please refer to the official Weiser webtapak atau hubungi bahagian perkhidmatan pelanggan mereka.
Untuk bantuan lanjut, lawati Weiser Lock official webtapak.
