pengenalan
Thank you for choosing the Furman RS-1 Remote System Control. This keyswitch panel is designed to provide convenient and secure remote on/off sequencing control for compatible Furman power sequencers and other power management devices. Please read this manual thoroughly before installation and operation to ensure proper use and to maximize the performance and longevity of your unit.
Maklumat Keselamatan Penting
Always observe the following safety precautions to prevent injury and damage to the unit or connected equipment:
- Jangan dedahkan unit kepada hujan atau lembapan.
- Jangan buka casing. Tiada bahagian yang boleh diservis pengguna di dalamnya. Rujuk semua servis kepada kakitangan perkhidmatan yang berkelayakan.
- Pastikan pembumian yang betul untuk semua peralatan yang disambungkan.
- Use only with compatible Furman power sequencers as specified in this manual.
- Install in a location free from excessive heat, dust, and vibration.
- Produk ini mengandungi bahan kimia yang diketahui oleh Negeri California untuk menyebabkan kanser dan kecacatan kelahiran atau bahaya pembiakan lain. Basuh tangan selepas mengendalikan.
Kandungan Pakej
Sahkan bahawa semua item terdapat dalam pakej:
- Furman RS-1 Remote System Control Panel
- Kekunci (2)
- Mounting Screws (if applicable, typically included for wall plate installation)
- Manual Pengguna ini
Persediaan dan Pemasangan
The Furman RS-1 is designed for remote control of compatible Furman power sequencers. Installation typically involves mounting the panel and connecting it to the sequencer via low-voltagpendawaian e.
Memasang Panel
The RS-1 is designed to fit into a standard single-gang electrical box or can be surface mounted. Ensure the mounting location is easily accessible and provides a clear path for wiring to the main power sequencer.
- Pilih lokasi pemasangan yang sesuai.
- Secure the RS-1 panel using appropriate screws (not always included, may require standard electrical box screws).
Sambungan Pendawaian
Connect the RS-1 to your Furman power sequencer according to the sequencer's specific wiring diagram. The RS-1 typically uses low-voltage control wiring. Refer to your sequencer's manual for detailed connection instructions.
Peranti Serasi:
- Furman ASD-120 Sequenced Power Distributor
- Pautan Kuasa
- Pelabuhan Kuasa
- Remote AC Controller
- MiniPort Power Relay series
- PS-8R
- PS-8R II
- PS-PRO II Power Sequencers
Rajah 1: Depan view of the Furman RS-1 Remote System Control Panel. It features a "SYSTEM ON" indicator light, an "ON" button, an "OFF" button, and a keyswitch for security.
Arahan Operasi
The Furman RS-1 provides a simple and secure method for controlling your power sequencer.
Menghidupkan Sistem
- Insert the key into the keyswitch on the RS-1 panel.
- Turn the key to the "ON" position. This enables the control functions of the panel.
- Tekan ke ON button. The connected Furman power sequencer will begin its power-up sequence.
- Observe the "SYSTEM ON" indicator light. It should illuminate (typically green) to confirm that the system is powered on and sequencing is active.
Mematikan Sistem
- Tekan ke DIMATIKAN button. The connected Furman power sequencer will begin its power-down sequence.
- The "SYSTEM ON" indicator light should extinguish once the system is fully powered off.
- Turn the key to the "OFF" position and remove it for security, if desired.
Note: The keyswitch provides a security lockout. The ON and OFF buttons will not function unless the key is inserted and turned to the "ON" position.
Penyelenggaraan
The Furman RS-1 requires minimal maintenance. Keep the panel clean and free of dust.
- Lap permukaan dengan kain lembut dan kering.
- Do not use liquid cleaners or abrasive chemicals.
- Ensure the keyswitch mechanism remains free of debris.
Tiada bahagian yang boleh diservis pengguna di dalam. Jangan cuba membuka atau membaiki unit ini sendiri.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| System does not power on/off when buttons are pressed. |
|
|
| "SYSTEM ON" indicator light does not illuminate. |
|
|
If you continue to experience issues, please contact Furman customer support.
Spesifikasi
| Ciri | Perincian |
|---|---|
| Model | RS-1 |
| Dimensi Produk | 4.75 x 3.5 x 2 inci |
| Berat Barang | 0.635 auns |
| warna | Hitam |
| Negara Asal | China |
| Peranti Serasi | Furman ASD-120 Sequenced Power Distributor, Power Link, Power Port, Remote AC Controller, MiniPort Power Relay series, PS-8R, PS-8R II, PS-PRO II Power Sequencers |
| Ciri Khas | Ergonomik |
Waranti dan Sokongan
For warranty information and technical support, please visit the official Furman webtapak atau hubungi bahagian perkhidmatan pelanggan mereka. Simpan resit pembelian anda sebagai bukti pembelian untuk tuntutan waranti.
Furman Customer Support:
- Webtapak: www.furmanpower.com
- Refer to the product page on Amazon for additional support links: Halaman Produk Amazon
