1. Pengenalan
This manual provides detailed instructions for the installation, programming, and operation of your Intermatic HB800RCH 15-AMP 7-Day Outdoor Plugin Digital Timer. This device is designed to automate the control of electrical loads outdoors, offering convenience and energy efficiency through programmable on/off cycles and astronomic features.
2. Maklumat Keselamatan
Please read and understand all safety instructions before installing or operating this timer. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Ensure the timer is plugged into a grounded outdoor receptacle protected by a Ground Fault Circuit Interrupter (GFCI).
- Do not immerse the timer in water or expose it to direct water spray.
- Do not exceed the maximum electrical rating of 15 Amps.
- Always unplug the timer from the power source before performing any maintenance or cleaning.
- Keep children away from the timer and connected devices.
- Jangan gunakan dengan wayar sambungan yang tidak dinilai untuk kegunaan luar.
3. Kandungan Pakej
Sahkan bahawa semua item terdapat dalam pakej:
- Intermatic HB800RCH Digital Timer Unit
- Manual Arahan
4. Ciri-ciri Produk
- Outdoor digital timer functionality
- Up to 14 programmable ON/OFF events per week
- 15-Amp capacity for various outdoor applications
- Astronomic feature: automatically adjusts to local sunrise/sunset times
- Two grounded receptacles for connecting devices
- Battery backup for settings retention during power outages

Rajah 1: Depan view of the Intermatic HB800RCH Digital Timer, showing the digital display, control buttons (OK, MODE, PROG, ON/OFF), and the manual override dial. The timer is gray with a black power cord and plug.

Rajah 2: Bawah view of the Intermatic HB800RCH Digital Timer, illustrating the two grounded electrical receptacles. These outlets are recessed for weather protection.
5. Persediaan
- Kuasa Permulaan: Plug the timer into a standard 120V AC outdoor GFCI-protected outlet. The display will illuminate.
- Pengaktifan Bateri: The timer includes a battery backup. Ensure it is active to retain settings during power outages. If the display is blank or dim, allow the timer to charge for a few minutes.
- Menetapkan semula Pemasa: If the display shows erratic characters or you wish to clear all previous settings, locate the small recessed reset button (often labeled 'R' or 'RESET') and press it firmly with a non-metallic pointed object (e.g., a pen tip). The display will reset to 12:00 AM.
- Setting Current Time and Day:
- Tekan ke MODE button until "SET CLOCK" appears.
- Gunakan OK button to select the hour, then use the rotary dial (or UP/DOWN buttons if present) to adjust the hour. Press OK untuk mengesahkan.
- Repeat for minutes and AM/PM.
- Gunakan OK button to select the day of the week, then use the rotary dial to adjust. Press OK untuk mengesahkan.
- Tekan MODE untuk keluar dari tetapan jam.
- Setting Current Date (for Astronomic Feature):
- Tekan ke MODE button until "SET DATE" appears.
- Gunakan OK button to select the year, then use the rotary dial to adjust. Press OK untuk mengesahkan.
- Repeat for month and day.
- Tekan MODE to exit date setting.
- Setting Location for Astronomic Feature:
- Tekan ke MODE button until "SET LOCATION" appears.
- Use the rotary dial to select your state/region. Press OK.
- Further refine your location if prompted (e.g., North, Central, South within a state). Press OK.
- Tekan MODE to exit location setting.
- Pelarasan Waktu Penjimatan Siang (DST): The timer is designed to automatically adjust for DST. Verify the setting under the "SET DST" menu option if available, or refer to the specific instructions for your model.
6. Arahan Pengendalian (Pengaturcaraan)
The HB800RCH timer allows for up to 14 ON/OFF events (7 ON, 7 OFF) per week. Each event can be set for specific days or groups of days.
- Memasuki Mod Program: Tekan ke PROG button. The display will show "PROG 1 ON".
- Setting ON Time:
- With "PROG 1 ON" displayed, press OK. The hour will flash.
- Use the rotary dial to adjust the hour. Press OK.
- Adjust minutes and AM/PM similarly. Press OK.
- Pemilihan Hari: The display will show the days of the week. Use the rotary dial to select the desired days for this ON event. Options typically include:
- MO TU WE TH FR SA SU (Every day)
- ISNIN TU RA TH JUM (Hari Kerja)
- SA SU (Weekends)
- Individual days (MO, TU, etc.)
- Setting OFF Time:
- After setting the ON time for PROG 1, the display will automatically advance to "PROG 1 OFF". Press OK.
- Adjust the hour, minutes, AM/PM, and day selection for the OFF event using the same method as the ON time. Ensure the OFF time is appropriate for the ON time.
- Tekan OK untuk mengesahkan.
- Programming Additional Events: After setting PROG 1 OFF, the display will advance to "PROG 2 ON". Repeat steps 2 and 3 for up to 7 ON/OFF programs.
- Exiting Program Mode: Tekan ke MODE button repeatedly until the current time is displayed, or wait for the timer to automatically exit program mode after a period of inactivity.
- Astronomic ON/OFF Events: To use the astronomic feature, select "DAWN" or "DUSK" instead of a specific time when setting an ON or OFF event. The timer will automatically calculate these times based on your set location and date. You can also set an offset (e.g., DUSK + 30 minutes).
- Pembatalan Manual: To temporarily turn the connected devices ON or OFF without affecting the programmed schedule, press the HIDUP/MATI button. The display will indicate "ON" or "OFF" and the timer will revert to the schedule at the next programmed event.
7. Penyelenggaraan
The Intermatic HB800RCH timer requires minimal maintenance.
- Pembersihan: Lap bahagian luar dengan lembut, damp kain. Jangan gunakan pembersih atau pelarut yang kasar. Pastikan pemasa dicabut daripada soket sebelum membersihkan.
- Bateri tambahan: The internal battery is designed to hold settings for an extended period (e.g., 3 months) during power outages. If the timer frequently loses settings after short power interruptions, the battery may need replacement. Refer to the manufacturer's guidelines for battery replacement, or contact customer support.
- Storan: Jika menyimpan pemasa untuk tempoh yang lama, pastikan ia bersih dan kering. Simpan di tempat yang sejuk dan kering.
8. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Paparan pemasa kosong atau malap. | No power to the unit; internal battery discharged. | Ensure the timer is securely plugged into a live outlet. Allow several minutes for the internal battery to charge. If problem persists, check the GFCI outlet. |
| Pemasa tidak HIDUP/MATI pada waktu yang diprogramkan. | Incorrect programming; manual override active; power outage; faulty unit. | Review programming steps carefully. Check if manual override is active (press ON/OFF button). Verify power supply. If settings are lost after power outages, the internal battery may be weak. |
| Difficulty programming the timer. | Complex interface; instructions not followed precisely. | Refer to Section 6: Operating Instructions. Take your time and follow each step. Use the reset button if necessary to start fresh. |
| Astronomic feature not working correctly. | Incorrect date or location set. | Verify the current date and your geographical location settings (state/region) as described in Section 5. |
| Connected device does not turn on. | Device not plugged in correctly; device is faulty; timer is not supplying power. | Ensure the device is securely plugged into the timer's receptacle. Test the device by plugging it directly into a wall outlet. Check the timer's manual override and programmed schedule. |
9. Spesifikasi
- model: HB800RCH
- Jenama: Intermatik
- Penarafan Elektrik: 120 VAC, 60 Hz, 15 Amps Resistive, 1800 Watts
- Number of ON/OFF Events: Up to 14 per week (7 ON, 7 OFF)
- Bekas: 2 Cawangan Berasaskan
- Bahan: plastik
- warna: Hitam
- Berat Barang: Approximately 1 pound (454 Grams)
- Dimensi: Kira-kira 8.1 x 6.9 x 3.8 inci (Saiz Pakej)
- Saiz Skrin: 2 Inci
- UPC: 078275111400
10. Waranti dan Sokongan
Waranti: This Intermatic product comes with a Limited Lifetime Warranty. For specific terms and conditions, please refer to the warranty documentation included with your purchase or visit the official Intermatic webtapak.
Sokongan Pelanggan: For technical assistance, troubleshooting, or warranty claims, please contact Intermatic customer support. Contact information can typically be found on the manufacturer's webtapak atau pada pembungkusan produk.
Anda boleh melawat Kedai Intermatic di Amazon untuk maklumat lanjut produk.





