STANLEY FATMAX 1-95-152 Aluminium Torch User Manual

pengenalan

This manual provides essential instructions for the safe and effective use, setup, and maintenance of your STANLEY FATMAX 1-95-152 Aluminium Torch. Please read this manual thoroughly before operating the device and retain it for future reference.

Maklumat Keselamatan

• Jangan melihat langsung ke lampu LED.
• Jauhkan daripada kanak-kanak.
• Jangan campurkan bateri lama dan baharu, atau jenis bateri yang berlainan.
• Remove batteries if the torch will not be used for an extended period.
• Buang bateri mengikut peraturan tempatan.
• Do not attempt to disassemble or modify the torch.

Kandungan Pakej

• STANLEY FATMAX Aluminium Torch
• Requires 3 x AAA Alkaline Batteries (not included)

Persediaan

Pemasangan Bateri

1. Unscrew the tail cap of the torch by turning it counter-clockwise.
2. Insert three (3) AAA alkaline batteries into the battery holder, ensuring correct polarity (+/-).
3. Place the battery holder with the installed batteries into the torch body.
4. Screw the tail cap back on clockwise until securely tightened.

Arahan Operasi

Menghidupkan/Mematikan

Press the button located on the tail cap to turn the torch on. Press the button again to turn the torch off.

Melaraskan Rasuk

The head of the torch can be rotated to adjust the focus of the light beam. Rotate the head clockwise or counter-clockwise to achieve a wider floodlight or a more focused spotlight.

Penyelenggaraan

Pembersihan

Wipe the torch body with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure the lens is clean for optimal light output.

Penggantian Bateri

When the light output diminishes, replace the AAA batteries following the installation steps in the "Setup" section. Always replace all three batteries at the same time with new, fresh alkaline batteries.

Penyimpanan

Store the torch in a cool, dry place. If storing for an extended period, remove the batteries to prevent leakage and potential damage to the torch.

Menyelesaikan masalah

• Lampu suluh tidak menyala:
  • Periksa sama ada bateri dimasukkan dengan betul dengan polariti yang betul.
  • Ensure batteries are fresh and not depleted.
  • Verify the tail cap is securely tightened.
• Cahaya malap atau berkelip-kelip:
  • Gantikan bateri dengan yang baru.
  • Bersihkan kenalan dan terminal bateri.
  • Pastikan kanta bersih.
• Beam adjustment is stiff:
  • Gently clean any debris from the head mechanism.
  • Avoid forcing the adjustment.

Spesifikasi

Waranti dan Sokongan

For warranty information or technical support, please refer to the official STANLEY FATMAX webtapak atau hubungi bahagian perkhidmatan pelanggan mereka. Simpan resit pembelian anda sebagai bukti pembelian.