PROXXON 28622 Flexible Shaft Micromot 110/bf Instruction Manual

1. Produk Lebihview

The PROXXON 28622 Flexible Shaft Micromot 110/bf is designed to extend the reach and versatility of your rotary tool. It features a polished steel flexible shaft with a precision aluminum accessory holder. The double ball bearing design ensures smooth operation, and the quick-release chuck accommodates accessories with shaft diameters from 0.3 mm to 3.2 mm. This tool is ideal for intricate work, allowing access to confined spaces and providing enhanced maneuverability.

Ciri-ciri utama termasuk:

• Polished steel flexible shaft for durability.
• Precision aluminum accessory holder with double ball bearings.
• Quick-release chuck for easy accessory changes, compatible with 0.3 mm to 3.2 mm shaft diameters.
• Extremely flexible design, preventing overheating even at tight angles.
• Total length of 100 cm for extended reach.
• Maximum rotational speed of 25,000 revolutions per minute (rpm).

Rajah 1: The PROXXON 28622 Flexible Shaft, showing the complete assembly with the drive end and the chuck end.

2. Arahan Keselamatan

Always observe the following safety precautions when using the flexible shaft:

• Baca semua arahan: Before operating, thoroughly read and understand this manual and the manual for your rotary tool.
• Pakai peralatan perlindungan diri: Always wear safety glasses or goggles. Consider hearing protection and a dust mask depending on the application.
• Bahan kerja selamat: Ensure your workpiece is firmly clampdiikat atau diamankan untuk mengelakkan pergerakan semasa operasi.
• Periksa sebelum digunakan: Check the flexible shaft and all accessories for damage or wear before each use. Do not use if damaged.
• Gunakan aksesori yang betul: Only use accessories designed for rotary tools and within the chuck's capacity (0.3 mm to 3.2 mm).
• Observe speed limits: Do not exceed the maximum recommended RPM of 25,000 for the flexible shaft or the maximum RPM of your accessory, whichever is lower.
• Avoid loose clothing and jewelry: Keep loose clothing, hair, and jewelry away from rotating parts.
• Maintain good grip: Hold the handpiece firmly during operation.
• Putuskan kuasa: Always disconnect the rotary tool from the power source before changing accessories, performing maintenance, or when not in use.
• Jauhkan kanak-kanak dan orang yang melihat: Ensure a safe working distance for others.

3. Komponen Produk

The PROXXON 28622 Flexible Shaft consists of the following main components:

• Aci Fleksibel: The main flexible cable housing the rotating inner shaft.
• Drive End: The end that connects to your rotary tool's output shaft.
• Handpiece (Accessory Holder): The working end of the flexible shaft, featuring the chuck.
• Quick-Release Chuck: Located on the handpiece, this allows for quick and secure attachment of various accessories.

Rajah 2: jarak dekat view of the quick-release chuck on the handpiece, designed for easy accessory changes.

4. Persediaan

Follow these steps to properly set up your flexible shaft with a compatible rotary tool:

1. Pastikan Kuasa Dimatikan: Disconnect your rotary tool from the power supply before beginning installation.
2. Prepare Rotary Tool: Refer to your rotary tool's instruction manual for specific guidance on attaching flexible shafts. Typically, you will need to remove any existing collet nut or accessory from the rotary tool's spindle.
3. Attach Drive End: Insert the drive end of the flexible shaft into the rotary tool's spindle. Ensure it is fully seated and securely fastened according to your rotary tool's instructions. Some tools may require a specific adapter or collar.
4. Sisip Aksesori:
   • Loosen the quick-release chuck on the flexible shaft handpiece by rotating the collar counter-clockwise.
   • Insert the shank of your desired accessory (e.g., drill bit, grinding stone) into the chuck. Ensure the shank is inserted as far as possible without bottoming out.
   • Tighten the chuck by rotating the collar clockwise until the accessory is firmly secured. Do not overtighten.
   • Gently pull on the accessory to confirm it is securely held and will not slip during operation.
5. Kedudukan: Lay the flexible shaft in a gentle curve, avoiding sharp bends or kinks, which can cause excessive wear or damage.

5. Arahan Operasi

Once the flexible shaft is properly set up, follow these guidelines for effective and safe operation:

1. Hidupkan kuasa: Connect your rotary tool to the power supply.
2. Start at Low Speed: Begin operation at a low speed setting on your rotary tool. Gradually increase the speed as needed for the task and accessory, ensuring not to exceed the maximum 25,000 RPM for the flexible shaft or the accessory's rated speed.
3. Kekalkan Kawalan: Hold the handpiece firmly with one hand, guiding the accessory to the workpiece. Use your other hand to support the flexible shaft if necessary, ensuring it remains in a gentle curve.
4. Gunakan Tekanan Lembut: Allow the accessory to do the work. Excessive pressure can lead to overheating, reduced performance, and premature wear of both the accessory and the flexible shaft.
5. Elakkan beban berlebihan: Do not attempt to perform tasks that require excessive torque or force, as this can damage the flexible shaft or your rotary tool.
6. Intermittent Use: For prolonged operations, allow the tool to cool periodically to prevent overheating.
7. Kerja selesai: Once the task is complete, turn off the rotary tool and wait for all rotating parts to come to a complete stop before setting the tool down or changing accessories.

6. Penyelenggaraan

Regular maintenance ensures the longevity and optimal performance of your PROXXON flexible shaft:

• Pembersihan: After each use, wipe down the exterior of the flexible shaft and handpiece with a clean, dry cloth. Remove any dust or debris from the chuck mechanism. Do not use harsh chemicals or solvents.
• Pelinciran: Periodically, the inner flexible shaft may require lubrication. This can typically be done by carefully unscrewing the handpiece and the drive end from the flexible casing, pulling out the inner shaft, and applying a thin layer of light machine oil or grease along its length. Reassemble carefully, ensuring all connections are secure. Refer to the manufacturer's guidelines for specific lubrication intervals and types.
• Pemeriksaan: Regularly inspect the flexible shaft for any signs of wear, cracks, or damage to the outer casing. Check the chuck for proper gripping action and ensure the bearings in the handpiece and drive end are smooth and free of play.
• Storan: Store the flexible shaft in a clean, dry place, ideally coiled loosely to avoid sharp bends. Protect it from extreme temperatures and direct sunlight.

7. Penyelesaian masalah

This section addresses common issues you might encounter with the flexible shaft:

8. Spesifikasi

9. Waranti dan Sokongan

Specific warranty details for the PROXXON 28622 Flexible Shaft are not provided in the available product information. For warranty claims, technical support, or inquiries regarding spare parts, please contact PROXXON directly through their official website or authorized distributors. Keep your proof of purchase for any warranty-related requests.