pengenalan
This manual provides essential information for the proper installation, operation, and maintenance of the Wheelock WPBB-R Weather Resistant Back-Box. The WPBB-R is designed for outdoor use and is weatherproof, specifically intended for mounting ASWP Horn Strobes. It includes a weep hole and plug for drainage.
Sila baca manual ini dengan teliti sebelum pemasangan dan simpan untuk rujukan masa hadapan.
Maklumat Keselamatan
AMARAN: Installation must be performed by qualified personnel in accordance with all local and national electrical codes and regulations. Failure to do so may result in property damage, serious injury, or death.
- Sentiasa putuskan kuasa sebelum memasang atau menservis peranti.
- Pastikan semua sambungan selamat dan terlindung dengan betul.
- Do not modify the product in any way. Use only genuine Wheelock accessories and parts.
- This back-box is designed for outdoor, weatherproof use. Ensure proper sealing during installation to maintain its weather resistance.
Produk Selesaiview
The Wheelock WPBB-R is a durable, red-colored metal back-box specifically designed to house Wheelock ASWP Horn Strobes in outdoor environments. Its robust construction and weatherproof features ensure reliable performance in various weather conditions.
Figure 1: Wheelock WPBB-R Weather Resistant Back-Box. This image shows the red metal back-box from an angled top-down perspective, revealing its square shape, internal mounting points, and the grey gasket around the opening.
Ciri-ciri Utama:
- Designed for use with Mounting ASWP Horn Strobes.
- Suitable for Outdoor USE/Weatherproof applications.
- Includes a WEEP Hole and Plug for moisture drainage.
- Constructed from durable metal with a powder-coated finish.
Persediaan dan Pemasangan
The WPBB-R back-box is designed for screw-in installation. Follow these general steps for proper setup:
- Pemilihan Tapak: Choose a suitable outdoor location that provides adequate support for the back-box and the ASWP Horn Strobe. Ensure the surface is flat and stable.
- Penyediaan Pemasangan: Mark the drilling points on the mounting surface using the back-box as a template. Ensure the weep hole, if used, is oriented downwards for proper drainage.
- Penggerudian: Drill appropriate pilot holes for the mounting screws.
- Secure Back-Box: Attach the WPBB-R back-box to the mounting surface using suitable screws (not included). Ensure it is securely fastened and level.
- Pendawaian: Route the necessary wiring into the back-box through the designated entry points. Ensure all wiring complies with local electrical codes.
- Install ASWP Horn Strobe: Mount the ASWP Horn Strobe onto the WPBB-R back-box, ensuring a tight and weatherproof seal. The back-box includes a gasket to aid in weather resistance.
- Weep Hole Management: The back-box includes a weep hole and a plug. For outdoor installations where moisture drainage is desired, ensure the weep hole is clear and positioned at the lowest point. If not needed or if a sealed enclosure is required, insert the provided plug.
- Semakan Akhir: Verify all connections are secure and the installation is robust.
Beroperasi
The Wheelock WPBB-R is a passive component designed to provide a weatherproof enclosure for ASWP Horn Strobes. It does not have active operational controls. Its function is to protect the mounted device from environmental elements.
Once properly installed, the back-box continuously performs its protective function. The operation of the ASWP Horn Strobe itself is independent of the back-box, beyond providing a secure and protected mounting point.
Penyelenggaraan
The Wheelock WPBB-R back-box requires minimal maintenance. Regular inspections are recommended to ensure its continued integrity and performance, especially in harsh outdoor environments.
- Pemeriksaan Visual: Periodically inspect the back-box for any signs of physical damage, corrosion, or wear. Check the integrity of the powder-coated finish.
- Integriti Meterai: Ensure the gasket and seal between the back-box and the mounted ASWP Horn Strobe remain intact and free from cracks or degradation. A compromised seal can lead to water ingress.
- Lubang Tangisan: If the weep hole is utilized, ensure it remains clear of debris (e.g., dirt, leaves, insect nests) to allow for proper drainage.
- Pembersihan: Clean the exterior of the back-box with a soft, damp cloth as needed to remove dirt or grime. Avoid abrasive cleaners or solvents that could damage the finish.
- Keselamatan Pemasangan: Verify that the back-box remains securely fastened to its mounting surface. Tighten any loose screws if necessary.
Menyelesaikan masalah
As a passive enclosure, the WPBB-R back-box itself typically does not experience "malfunctions." Most issues would relate to its protective function or physical integrity.
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Water/Moisture inside the back-box | Compromised seal/gasket; improperly installed weep plug; weep hole blocked. | Inspect and replace damaged gasket. Ensure weep plug is properly seated or removed if drainage is desired. Clear any obstructions from the weep hole. Re-seal the ASWP Horn Strobe to the back-box. |
| Back-box is loose on mounting surface | Loose mounting screws; inadequate mounting surface. | Tighten all mounting screws. If the surface is inadequate, consider reinforcing it or relocating the installation. |
| Visible corrosion or damage to back-box | Environmental exposure; physical impact. | Assess the extent of damage. Minor surface corrosion on the powder coat may be cleaned and touched up. Significant damage may require replacement of the back-box to ensure continued protection. |
Spesifikasi
| Atribut | Perincian |
|---|---|
| Nombor Model | WPBB-R |
| Jenama | roda roda |
| bahan | logam |
| warna | merah |
| Jenis Selesai | Bersalut Serbuk |
| Jenis Pemasangan | Skru Masuk |
| Dimensi Produk | 2 x 5 x 5 inci |
| Berat Barang | 8 auns |
| Pengeluar | EATON CORPORATION |
| UPC | 786697090141 |
| Keserasian | Designed for Wheelock ASWP Horn Strobes |
| Penilaian Alam Sekitar | Outdoor USE/Weatherproof |
Waranti dan Sokongan
For warranty information and technical support regarding your Wheelock WPBB-R Weather Resistant Back-Box, please refer to the official Wheelock or Eaton Corporation weblaman web, atau hubungi khidmat pelanggan mereka secara langsung.
Pengeluar: EATON CORPORATION (Wheelock is a brand of Eaton)
Please have your model number (WPBB-R) and UPC (786697090141) available when contacting support.
You can often find support contact details and product documentation on the manufacturer's official webtapak:
