Produk Selesaiview
The Clarity Wake Assure+ Desktop Alarm Clock is designed to provide a reliable and effective wake-up solution, especially for heavy sleepers, the deaf, and the hard of hearing. It combines a loud audible alarm with a powerful vibrating bed shaker to ensure you never miss an important wake-up call.
Ciri-ciri utama termasuk:
- Guaranteed Wake-Up: Choose between a loud audible alarm (up to 85dB), a powerful vibrating bed shaker, or both.
- Penggera Boleh Disesuaikan: Adjustable volume and tone settings for the audible alarm.
- Paparan Mudah Dibaca: Large 1.8-inch digital LCD display with full dimmable functionality to reduce light disturbance.
- Bateri tambahan: Maintains time and program settings during power outages with a standard 9V battery (not included).
- Built-in Telephone Jack: Alerts users to incoming phone calls, beneficial for landline users or those with videophones.
- Dikuasakan AC: Plugs into any standard wall outlet, eliminating the need for frequent battery replacements for primary operation.
Persediaan
- Membongkar: Carefully remove all components from the packaging. Verify that you have the alarm clock unit, vibrating bed shaker, and AC power adapter.
- Sambungan Kuasa: Insert the small plug of the AC power adapter into the 9V DC jack located on the back of the alarm clock. Plug the AC adapter into a standard wall outlet. The display will illuminate.
Rajah 2: Belakang view of the alarm clock, highlighting the 9V DC power input and the vibrating shaker port. - Battery Backup Installation (Optional but Recommended): Untuk kuasa outage protection, open the battery compartment on the back of the unit and insert one standard 9V battery (not included). Close the compartment securely. This battery will maintain time and alarm settings during a power interruption.
- Connecting the Vibrating Bed Shaker: Plug the cord of the vibrating bed shaker into the dedicated shaker port on the back of the alarm clock. Place the shaker under your pillow or mattress for optimal vibration.
- Menetapkan Masa:
- Tekan dan tahan butang TETAPKAN JAM butang.
- Sambil pegang TETAPKAN JAM, tekan butang JAM button to adjust the hour. Observe the AM/PM indicator.
- Sambil pegang TETAPKAN JAM, tekan butang MINIT butang untuk menyesuaikan minit.
- Lepaskan TETAPKAN JAM button when the correct time is set.
- Connecting to Telephone Line (Optional): If you wish to be alerted to incoming phone calls, connect a telephone line cord (included) from your wall jack to either the LINE 1 or LINE 2 port on the side of the alarm clock.
Rajah 3: Sisi view of the alarm clock, illustrating the volume control knob and the telephone line input jacks.
Arahan Operasi
Menetapkan Penggera
- Tekan dan tahan butang TETAPKAN PENGGERA butang.
- Sambil pegang TETAPKAN PENGGERA, tekan butang JAM button to adjust the alarm hour. Observe the AM/PM indicator.
- Sambil pegang TETAPKAN PENGGERA, tekan butang MINIT butang untuk menyesuaikan minit penggera.
- Lepaskan TETAPKAN PENGGERA butang apabila masa penggera yang diingini ditetapkan.
- Untuk mengaktifkan penggera, luncurkan penggera MODUL ALARM switch (located on the front panel) to your preferred setting:
- SEMUA SEKALI: Activates sound, flash, and shaker.
- FLASH SOUND SHAKER: Activates flash, sound, and shaker.
- BUNYI KILAT: Activates flash and sound.
- FLASH SHAKER: Activates flash and shaker.
- BUNYI: Activates sound only.
- SHAKER: Activates shaker only.
- MATI: Penggera dinyahaktifkan.
Rajah 4: Depan view of the alarm clock, showing the large digital display and the alarm mode selection switch.
Adjusting Alarm Volume and Tone
- Kelantangan: Putar JILID knob located on the left side of the unit to increase or decrease the audible alarm volume.
- Nada: Putar TONA knob located on the right side of the unit to adjust the pitch (frequency) of the audible alarm. This is particularly useful for individuals with specific hearing loss frequencies.
Rajah 5: Sisi view of the alarm clock, illustrating the tone control knob.
Fungsi Tunda
Apabila penggera berbunyi, tekan besar SNOOZE / RESET bar located on the top of the unit to temporarily silence the alarm. The alarm will sound again after approximately 9 minutes.
Fungsi Dimmer
Luncurkan DIMMER switch (located on the front panel) to adjust the brightness of the digital display. This allows you to set the display to a comfortable level for day or night viewing.
Telephone Call Alert
If connected to a telephone line, the alarm clock will provide an alert (flash, sound, or shaker, depending on alarm mode settings) when an incoming call is detected, even if the alarm is not set to go off.
Penyelenggaraan
- Pembersihan: To clean the alarm clock, wipe the exterior surfaces with a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents as they may damage the finish. Ensure the unit is unplugged before cleaning.
- Penggantian Bateri: If the battery backup is installed, replace the 9V battery annually or if the clock loses time during a power outage.
- Storan: If storing the unit for an extended period, unplug it from the power outlet and remove the 9V battery.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Paparan jam kosong. | No power, AC adapter unplugged, or power outage with no battery backup. | Ensure AC adapter is securely plugged into the clock and a working wall outlet. Install a fresh 9V battery for backup. |
| Alarm does not sound/vibrate/flash. | Alarm not set, alarm mode switch set to OFF, or volume too low. | Verify alarm time is set correctly. Check that the ALARM MODE switch is set to a desired alert option (e.g., ALL IN, SOUND, SHAKER). Increase volume if using audible alarm. Ensure shaker is properly connected. |
| Paparan terlalu terang/malap. | Dimmer switch setting. | Adjust the DIMMER switch on the front panel to your preferred brightness level. Note: The display has specific brightness levels, not a continuous dimming range. |
| Telephone alert not working. | Telephone line not connected, or alarm mode not set to include flash/sound/shaker. | Ensure telephone line is securely connected to the clock and wall jack. Check that the ALARM MODE switch is set to an option that includes a visual, audible, or vibratory alert. |
| Masa tidak betul selepas kuasa outage. | No 9V battery installed, or battery is depleted. | Install a fresh 9V battery for battery backup. Reset the time if necessary. |
Spesifikasi
| Ciri | Perincian |
|---|---|
| Jenama | Kejelasan |
| Nombor Model | 600 |
| Jenis Paparan | Digital LCD (1.8" tall) |
| Kelantangan Penggera | Sehingga 85dB |
| Sumber Kuasa | AC-Powered with 9V Battery Backup (battery not included) |
| Dimensi Produk | 6.5"W x 4"H |
| Berat Barang | 2.45 paun |
| bahan | plastik |
| Ciri Khas | Vibrating Bed Shaker, Adjustable Tone, Dimmable Display, Telephone Jack |
Maklumat Waranti
The Clarity Wake Assure+ Desktop Alarm Clock comes with a Waranti Terhad. Please refer to the warranty card included in your product packaging for specific terms, conditions, and duration of coverage. Retain your proof of purchase for warranty claims.
Sokongan Pelanggan
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Clarity customer support. Contact information can typically be found on the manufacturer's webtapak atau pada pembungkusan produk.
You may also visit the product page on Amazon for additional resources and frequently asked questions: Halaman Produk Amazon
