Furman M-10X E

Furman Power Line Conditioner M-10X E User Manual

Model: M-10X E

1. Pengenalan

The Furman M-10X E Power Line Conditioner is designed to provide a reliable and low-cost AC power solution for any rack mount system. This unit features ten switched outlets on the rear panel, capable of powering and protecting your equipment up to a 10-amp load. It integrates essential power conditioning features to safeguard your valuable audio and video gear.

2. Ciri-ciri Utama

3. Arahan Persediaan

  1. Membongkar: Carefully remove the Furman M-10X E from its packaging. Retain all packaging materials for future transport or storage.
  2. Pemasangan Rak: The M-10X E is designed to fit into a standard 19-inch equipment rack. Secure the unit using appropriate rack screws (not included) through the mounting ears on the front panel. Ensure the unit is stable and properly supported.
    Furman M-10X E Power Line Conditioner, front angled view, showing rack ears and power switch.

    Rajah 1: Bersudut hadapan view of the Furman M-10X E, illustrating its rack-mountable design and front panel controls.

  3. Sambungan Kuasa: Connect the attached power cord from the M-10X E to a grounded AC power outlet. Ensure the outlet provides the correct voltage (230 Volts) and is capable of handling a 10-amp memuatkan.
  4. Peralatan penyambung: Plug your audio/video equipment into the ten switched outlets located on the rear panel of the M-10X E.
    belakang view of Furman M-10X E Power Line Conditioner, showing ten switched outlets.

    Rajah 2: Belakang view of the Furman M-10X E, highlighting the ten switched outlets for connecting various devices.

    Close-up of the rear outlets on the Furman M-10X E Power Line Conditioner.

    Rajah 3: Satu terperinci view of the rear outlets, showing the spacing and type of connections available.

4. Arahan Operasi

  1. Menghidupkan/Mematikan: Use the "POWER ON" switch located on the front panel to turn the unit on or off. This switch controls power to all ten rear outlets.
    Close-up of the front panel of Furman M-10X E, showing the power switch and protection indicator.

    Figure 4: Close-up of the front panel, displaying the main power switch and the "Protection OK" indicator light.

  2. Penunjuk Perlindungan: A "PROTECTION OK" indicator light on the front panel illuminates when the unit is providing surge protection. If this light is off, the surge protection circuitry may have been compromised, and the unit should be serviced.

5. Penyelenggaraan

6. Penyelesaian masalah

MasalahKemungkinan PuncaPenyelesaian
No power to connected equipment.Unit is off, power cord disconnected, or circuit breaker tripped.Ensure the "POWER ON" switch is engaged. Check that the power cord is securely connected to both the unit and the wall outlet. Reset the rear-panel circuit breaker if it has tripped.
"PROTECTION OK" light is off.Surge protection circuitry has been compromised.The unit may no longer be providing full surge protection. Contact Furman customer support for service or replacement.
Humming or buzzing from audio equipment.Ground loop or AC line noise.Ensure all equipment is properly grounded. The M-10X E's AC noise filtering should help; if not, further investigation into your system's grounding may be required.

7. Spesifikasi

8. Apa yang ada di dalam Kotak

9. Waranti dan Sokongan

The Furman M-10X E Power Line Conditioner comes with a limited warranty. For detailed warranty information, technical support, or service inquiries, please refer to the official Furman website or contact Furman customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.

Untuk bantuan lanjut, lawati pegawai Furman Store on Amazon.

Dokumen Berkaitan - M-10X E

Praview Furman M-10x E / M-10Lx E Power Conditioner Manual Pemilik
Manual pemilik yang komprehensif untuk perapi kuasa Furman Merit Series M-10x E dan M-10Lx E. Ketahui tentang perlindungan lonjakan, penapisan RFI/EMI, konfigurasi alur keluar, pencahayaan LED dan arahan keselamatan.
Praview Palam Furman Pro: Perapi Kuasa dan Unit Pengedaran
Terokai Palam Furman Pro, termasuk perapi kuasa (SS-6, SS-6B, SS-6B-Pro) dan unit pengedaran (PlugLOCK, ACX-25), menawarkan perlindungan lonjakan, penapisan hingar dan kuasa yang boleh dipercayai untuk peralatan audio dan video. Mempunyai spesifikasi terperinci, garis panduan keselamatan dan maklumat jaminan.
Praview Furman Elite 10 E AC Power Conditioner Owner's Manual
Detailed owner's manual for the Furman Elite 10 E AC Power Conditioner, covering features, installation, safety, connections, warranty, and specifications for optimal audio and video performance.
Praview Furman F1500-UPS: Bekalan Kuasa Tidak Terganggu 1500VA, Sandaran Bateri dan Perapi Kuasa
Maklumat terperinci tentang Furman F1500-UPS, sandaran bateri 1500VA dan perapi kuasa yang direka untuk profesional audio/video, menampilkan perlindungan lonjakan SMP, penapisan hingar LiFT, voltan AVRtage peraturan, dan output Gelombang Sinus Benar.
Praview Manual Pemilik Perapi Kuasa Furman PL-PLUS CE
Manual pemilik yang komprehensif untuk perapi kuasa Furman PL-PLUS CE, memperincikan ciri, arahan keselamatan, operasi, penyelesaian masalah dan spesifikasinya. Termasuk teknologi perlindungan SMP, EVS dan LiFT.
Praview Manual Pemilik Furman PS-8RE III Perapi Kuasa dan Sequencer
Manual pemilik rasmi untuk Furman PS-8RE III, memperincikan penyaman kuasa termaju, perlindungan lonjakan (SMP+), penapisan linear (LiFT) dan ciri penjujukan kuasa untuk sistem audio-visual. Termasuk keselamatan, operasi dan panduan penyelesaian masalah.